So I just wanted to say to anyone seeing this comment... Always give our truck driver's love and respect. They are the reason we have food in our belly, clothes on your back and just about everything else you use daily. So give them the room on the roads and a friendly wave.maybe even pay for their coffee whenever possible. They are the reason we have what we have.
Amen to that brother. I was OTR for 45 years and even though I'm now retired..5 years now, I have the highest respect for the drivers that made it past a trainer. Not so much for the " truck killers" that go around murdering and maiming trucks in the truckstops and customers lots.They should've never been passed and the trainer should be busted back to a trainee his self. I wouldn't have known how much of this truck bashing goes on had the dash cams not come along. From the videos I've seen its even worse in other countries. But I stand by you in saying that most drivers deserve a lot of respect for the job they do. It's an incredibley hard way to make a living! You have to love it....you can't just do it for a paycheck😎🇺🇸
Not just them, give everyone working long and hard jobs like trucking, railroading, and more love and respect. Trucking wouldn't be here if we didn't have railroaders because trucking is fueled by railroads hauling materials to be loaded onto trucks and then delivered across the nation(s)
I recently acquired my dream 84 peterbilt 362 previous owner had custom ordered. It has a NTA 855 cummins, 15 speed trans, with streached fifth wheel original PTO attached to the fuel tank this truck was truly designed as a one-of-a-kind. After sitting for 12 years with no attention because the gentleman had passed away I acquired this truck and to my surprise after changing the batteries it fired right up like it never sat there. I'm almost done with the new tires new turbo things that I wanted to upgrade before putting it on the road but I have to say respect to you and what you're doing to your vehicle.
When I got into trucking in 1987 I learned a lot from my uncle Check who was an O/O in the first few years I learned more from older drivers. I did what I could to pass on knowledge to rookies drivers. Most listened some didn't.
It's a great truck. Love that sound of the engine. I actually put a Caterpillar 3406b in a Volvo f12. The truck is not yet finish but I put a video on my profile. Thanks.
lol the bugs and insects will love your new bumper Mr Feszchek thanks to Brock and Matthew helping with the fitting and removal of old bent bumper and grill good stuff👌
That bumper does look awesome! The time it took to do it right, measuring everything out, is certainly well worth it when you step back and look at it 👌🏻
If the production quality of these videos doesn't satisfy some people, they'll never be satisfied. Just keep doing what you're doing. This channel should have 10x the current subscribers. It's like Bruce Wilson all grown up without all the bullshit and lies.
Great video, not often that you get to hear a truck going through the gears on the open road from the outside and also see the in cab shifting. Perfect blend of man and machine at work.
You’re doing well...good job paying attention to many details. You’re right...some people like the action and sounds...others, who knows, but that’s what trucking involves...sounds and action. I like your text comments and verbal input as well...narration. We can’t always tell where you’re at on the road. Some of us pay attention to locations and others could care less...it is what it is, right! Just do your thing. I love a drop deck/step deck. I’ve never pulled one though. I’ve only pulled a flatbed and box trailers. Good points about the chains and binders. Thanks for taking us along with ya! God bless ALL of our truckers! Make the trip and enjoy the ride! 😎
Good video again I sure do like The front bumper on your Cab over that sure sharp with all the lights on it it was good my friend be safe on the road my friend
Put some aluminum buds on the back of some hub caps and lug covers a nice polish job and she be perfect i got a 81 362 with a custom bumper there certainly not easy to find and not cheap by any means your doin good with her
That bumper makes your truck and the lights look great, great how the lads helped you fit it and the grill. Can you get some night shots when you have time so we can see it illuminated, great videos loving them over here in the UK, keep up the good work!
Amazing camara work bud. Great work on stepping up your camara views. Just so you know I'm a subscriber. I always look forward to your videos. I've only been with the channel for a few weeks but enjoying All the videos. Stay safe out there brother.
Feszchak. That sounds so much like Polish :) Loved your video. That's a lot of hard work you do. I like the old 362 cabover, I know it only from the PC games :) Looking forward for more. Regards from Ukraine!
In case anyone was wondering, the Army trucks with the white and black painted numbers are there for the "reset" contract. The old iron is all rebuilt. The truck you're hauling is a PLS truck, Palletized Load System.
Anuvva cracking vlog Bro . Excellent looking truck and it sounds awesome when it's pulling . Can't wait for some night shots when it's all lit up Many fanx :-D
Love the truck, seein you running that ol girl makes me want to become a driver, I know of a decent 87 Kenworth k100 just sittin and really makes me want to hop in it and get on the road. Believe it has a 350 Cummins and a 9spd.
All I think seeing the fine '79 is if it stays that color - name it Ol' Yeller. And crazy thinking with no idea if possible, but sure be a sweet backdate to custom swap out Orwell's square lights with 352 round lights!
Really nice truck I’ve been thinking about buying one for myself I know where’s one at with a long big sleeper on it next time I get home I will take some pictures
Hey if you ever get a minute, you may like the Twin Stick garage [I think that's it] but it's this feller out in Alberta who's just finished off an old Pete and is now onto a Kenworth [very cool stuff that you'd maybe like]. He's a thorough cat like yourself. Keep the Truck vids coming and old hotrod stuff is very cool as well.
Neat that your company lets you run an older piece of equipment. So many want a newer truck with huge payments instead of an older well maintained truck. So give the company a plug. Maybe some other guys would like to be with them, not me. Retired and at 74 not ready to truck anymore except in my dreams, still run a lot of miles at night LoL
Just like to say that motor sounds so sweet and the turbo between gear changes, the noise is beautiful. I noticed on changing gear once rolling you don’t use the clutch having driven myself both trucks and busses here in the U.K. but can you tell other people why you do that, they might want to know. Thanks and keep trucking, markUK
Good morning my friend that must be a 13 speed transmission i have been without power for 4 days and 3 night because of Hurricane Sally it was a rough ride in the storm broke about 5 power poles a street above me but my family is safe and my house in good shape
I think your videos are great and you camera/production work is well advanced. You deserve more subs than you have. Come on guys and girls! Give this guy a SUB!
Hey Bro - New to your channel and dig your video drives. Love the country views and the interstate highways. I'm a contractor in California getting ready to make a career change (hands, back, and arms are ready for a change) I love those old trucks. Question thou... any of your gauges work?! LOL who cares - love the truck.
definitely got air in the fuel system looking at your fuel pressure gauge going back n forth, worth cracking the line on the back of the gauge while it's running to bleed it and see if that sorts it out, or it will tell you your drawing air into the fuel system when parked.
The little critters of nature, they don't know that they're ugly thats very funny! A fly marrying a bumblebee, I told ya Id shoot but ya didn't believe me WHYYY DIDN'T YOU BELIEVE ME???😆 Sorry reminded me of ren an stimpy.
I would get used to multiple FSC videos dropping every a couple of days. If you ever come through northwest Louisiana and have the time, it would be great to meet you.
Always loved cabovers and the three whiper pete is the best. got to get some wheels and some 8" straight pipes ! and I've always Dug those top fuel spoiler, Easy for me to say it's not my cash. Love the cam on the trailor ! anyways Cool Truck
Wow, a white buffering circle on your fuel filter gauge. How futuristic! Internet must have been slow then (or maybe it's now, not sure.) That bumper is too shiny! Need to hit some deer with it or something. 1:20 Max. 2:35 Why is it so dark? 5:20 Why is it so dark?? I feel like I'm wearing polarized sunglasses.
First time commenting but I really enjoy watching your videos unlike some you keep yours real very rare to see those trucks out on the road she looks Amazing and sounds awesome now just a question are you going to put some wheels in the back? God Bless stay safe out there till next time from Oxnard California 🙋♂️🙏❤👍
Awesome video and cinematography. Keep doing what your doing. You'll figure out your own way on here. Just curious.... Plans to stretch frame? New paint scheme of freshen or just repaint old design?
At 5:57 like how it seems everywhere except California moves over for emergency vehicles on shoulder. QUESTION: New bumper no longer has holes to access tow hooks. What will happen?
LOOKING GOOD NOW MAKE THE KID START CLEANING RIMS IN THE REAR AND Painting them polishing the fronts think about paint nice truck runs good now make it look good luck take care be safe!
You've got good movie making skills. I like your trailer mounted cameras. Do dealers sell all their HEMETTs? What do people want them for or do foreign armies buy them?
So I just wanted to say to anyone seeing this comment... Always give our truck driver's love and respect. They are the reason we have food in our belly, clothes on your back and just about everything else you use daily. So give them the room on the roads and a friendly wave.maybe even pay for their coffee whenever possible. They are the reason we have what we have.
Amen to that brother. I was OTR for 45 years and even though I'm now retired..5 years now, I have the highest respect for the drivers that made it past a trainer. Not so much for the " truck killers" that go around murdering and maiming trucks in the truckstops and customers lots.They should've never been passed and the trainer should be busted back to a trainee his self. I wouldn't have known how much of this truck bashing goes on had the dash cams not come along. From the videos I've seen its even worse in other countries. But I stand by you in saying that most drivers deserve a lot of respect for the job they do. It's an incredibley hard way to make a living! You have to love it....you can't just do it for a paycheck😎🇺🇸
Also, don't forget railroad workers. Much of the freight moves long haul via the railroads.
@@kevineich5029 oh yes, we don't want to forget them guysl
Not just them, give everyone working long and hard jobs like trucking, railroading, and more love and respect. Trucking wouldn't be here if we didn't have railroaders because trucking is fueled by railroads hauling materials to be loaded onto trucks and then delivered across the nation(s)
Man, she sounds good. Nothing like that mechanical motor sound...
I'm retired not driving so it's time for answer Jack and coke. Keep on trucking buddy.
Love watching you doing your thing.
In all my years of driving in Australia I never left home in a dirty truck. First thing when I would get home was to wash & then do maintenance.
I recently acquired my dream 84 peterbilt 362 previous owner had custom ordered. It has a NTA 855 cummins, 15 speed trans, with streached fifth wheel original PTO attached to the fuel tank this truck was truly designed as a one-of-a-kind. After sitting for 12 years with no attention because the gentleman had passed away I acquired this truck and to my surprise after changing the batteries it fired right up like it never sat there. I'm almost done with the new tires new turbo things that I wanted to upgrade before putting it on the road but I have to say respect to you and what you're doing to your vehicle.
Now you gotta get the tanks,stacks,and front wheels polished to match that fancy bumper 👍👍👍
love these classic cabovers ole girl sounds greeeeeatt..
Got to love it no frills just old school trucking keep up the great work
I’m so in love with this truck it sound so damn good music to my ears lol
“Mack? I ain't no Mack, I'm a Peterbilt for dang sake!”
When I got into trucking in 1987 I learned a lot from my uncle Check who was an O/O in the first few years I learned more from older drivers. I did what I could to pass on knowledge to rookies drivers. Most listened some didn't.
Good to see old iron doing the same job as new
It's a great truck. Love that sound of the engine. I actually put a Caterpillar 3406b in a Volvo f12. The truck is not yet finish but I put a video on my profile. Thanks.
lol the bugs and insects will love your new bumper Mr Feszchek thanks to Brock and Matthew helping with the fitting and removal of old bent bumper and grill good stuff👌
That bumper does look awesome! The time it took to do it right, measuring everything out, is certainly well worth it when you step back and look at it 👌🏻
Your doing a fine job there brother thanks for sharing as always much love and respect from Detroit
Thanks!, I Love the sound of a Cat!,Air B Model,....loafin thur the gears, and the Turbo..... Miss mine!
If the production quality of these videos doesn't satisfy some people, they'll never be satisfied.
Just keep doing what you're doing. This channel should have 10x the current subscribers. It's like Bruce Wilson all grown up without all the bullshit and lies.
Perfectruck!!! With The Bumper Now.
The Spooling Turbo Cat Soundieselove it!!!!! 💪💪💨💨
Great video, not often that you get to hear a truck going through the gears on the open road from the outside and also see the in cab shifting. Perfect blend of man and machine at work.
You’re doing well...good job paying attention to many details. You’re right...some people like the action and sounds...others, who knows, but that’s what trucking involves...sounds and action. I like your text comments and verbal input as well...narration. We can’t always tell where you’re at on the road. Some of us pay attention to locations and others could care less...it is what it is, right! Just do your thing. I love a drop deck/step deck. I’ve never pulled one though. I’ve only pulled a flatbed and box trailers. Good points about the chains and binders. Thanks for taking us along with ya! God bless ALL of our truckers! Make the trip and enjoy the ride! 😎
Steve that truck looks sick as hell driving down the road, nice job man nothing like them old trucks.
Great camera angles. Thanks for taking so much time to give us a glimpse.
That truck sounds sweet driver . Digging the cabover . I think I would call the yellow Peterbilt Amber 🤷♂️
First big truck 🚚 I learn to drive,was a 1978 marmon cabover, I really enjoyed 😀 driving that rig.
Cool looking rig too!
Good video again I sure do like The front bumper on your Cab over that sure sharp with all the lights on it it was good my friend be safe on the road my friend
Put some aluminum buds on the back of some hub caps and lug covers a nice polish job and she be perfect i got a 81 362 with a custom bumper there certainly not easy to find and not cheap by any means your doin good with her
I love it when a plan comes together
Love your video's, you are doing a great job. Here in the Netherlands it's all cabovers, but nothing as good as your Peterbilt
On the road. Man that bumper is awesome
Great job on videos man. You're doing something right with all these followers waiting for the next video
That bumper makes your truck and the lights look great, great how the lads helped you fit it and the grill. Can you get some night shots when you have time so we can see it illuminated, great videos loving them over here in the UK, keep up the good work!
Amazing camara work bud. Great work on stepping up your camara views. Just so you know I'm a subscriber. I always look forward to your videos. I've only been with the channel for a few weeks but enjoying All the videos. Stay safe out there brother.
Much appreciated!
Good morning. I was just watching you and your son put the lights on the front of your new bumper... Looks very nice brother.
Thanks 👍
Dude, you're doing just fine. I'm learning a lot from your talks. I love watching your videos.
Feszchak. That sounds so much like Polish :)
Loved your video. That's a lot of hard work you do. I like the old 362 cabover, I know it only from the PC games :) Looking forward for more. Regards from Ukraine!
In case anyone was wondering, the Army trucks with the white and black painted numbers are there for the "reset" contract. The old iron is all rebuilt.
The truck you're hauling is a PLS truck, Palletized Load System.
Anuvva cracking vlog Bro . Excellent looking truck and it sounds awesome when it's pulling . Can't wait for some night shots when it's all lit up
Many fanx
:-D
I love them cabovers.my dad had 3 of them. F model mack.cruizeliner mack cabover. And then the mh ultraliner. Keep them comeing.
Like your channel love the new bumper.
The new bumper looks good!
I like the bumper.. it has so much lights.
Always enjoy your truck videos, your doing a great job. Keep up the good work and be safe out on the road.
Workin mans truck 💪 luv it
Love the truck, seein you running that ol girl makes me want to become a driver, I know of a decent 87 Kenworth k100 just sittin and really makes me want to hop in it and get on the road. Believe it has a 350 Cummins and a 9spd.
All I think seeing the fine '79 is if it stays that color - name it Ol' Yeller.
And crazy thinking with no idea if possible, but sure be a sweet backdate to custom swap out Orwell's square lights with 352 round lights!
God I miss driving a cab over!!
Great job and video brings back memories
Glad you enjoyed it
Love. That. Truck
Looks good rollin need a visor next
Really nice truck I’ve been thinking about buying one for myself I know where’s one at with a long big sleeper on it next time I get home I will take some pictures
I like how you can hear the gear shifts
Hey if you ever get a minute, you may like the Twin Stick garage [I think that's it] but it's this feller out in Alberta who's just finished off an old Pete and is now onto a Kenworth [very cool stuff that you'd maybe like]. He's a thorough cat like yourself. Keep the Truck vids coming and old hotrod stuff is very cool as well.
I've seen some of his videos. He has some cool trucks.
Neat that your company lets you run an older piece of equipment. So many want a newer truck with huge payments instead of an older well maintained truck.
So give the company a plug. Maybe some other guys would like to be with them, not me. Retired and at 74 not ready to truck anymore except in my dreams, still run a lot of miles at night LoL
Im loving these videos !!!!!!!
Wow best video yet with that's start and please paint the rear wheels even if it's matt black there would set the truck off better
Just like to say that motor sounds so sweet and the turbo between gear changes, the noise is beautiful. I noticed on changing gear once rolling you don’t use the clutch having driven myself both trucks and busses here in the U.K. but can you tell other people why you do that, they might want to know. Thanks and keep trucking, markUK
Orville looks great
Good morning my friend that must be a 13 speed transmission i have been without power for 4 days and 3 night because of Hurricane Sally it was a rough ride in the storm broke about 5 power poles a street above me but my family is safe and my house in good shape
Glad you're all ok. Keep your head up and press on. Better days are ahead.
Your doing a great job
I think your videos are great and you camera/production work is well advanced. You deserve more subs than you have. Come on guys and girls! Give this guy a SUB!
The lights and bumber shur made the cabover stand out
Love this truck make a video shifting that 13 speed nice work
100% better, Luv those old cabovers!
Ur getting me fired up to get in back of the wheel again.
Hey Bro - New to your channel and dig your video drives. Love the country views and the interstate highways. I'm a contractor in California getting ready to make a career change (hands, back, and arms are ready for a change) I love those old trucks. Question thou... any of your gauges work?! LOL who cares - love the truck.
definitely got air in the fuel system looking at your fuel pressure gauge going back n forth, worth cracking the line on the back of the gauge while it's running to bleed it and see if that sorts it out, or it will tell you your drawing air into the fuel system when parked.
Good morning from the great state of Ohio 😎👍
I saw a kenworth w900 8:50 and at 9:14
I was wondering if the first bug that hits that new bumper will wonder if he's looking at a cousin. As they go splat !! LOL
The little critters of nature, they don't know that they're ugly thats very funny! A fly marrying a bumblebee, I told ya Id shoot but ya didn't believe me WHYYY DIDN'T YOU BELIEVE ME???😆 Sorry reminded me of ren an stimpy.
It will end up in a frame hung behind the counter.
Super truck 👍
Please do more in the cab foptage
I would get used to multiple FSC videos dropping every a couple of days. If you ever come through northwest Louisiana and have the time, it would be great to meet you.
I try to get editing done when I'm home. Can't get it done from the road. Thanks for the invite.
That truck needs some aluminum rims on the back
Or at least paint them white until he get some aluminum ones
No
Give him time
Always loved cabovers and the three whiper pete is the best. got to get some wheels and some 8" straight pipes ! and I've always Dug those top fuel spoiler, Easy for me to say it's not my cash. Love the cam on the trailor ! anyways Cool Truck
You got life behind the wheels Pete in your video while you were sitting at the light.
I thought that was a Kenworth in my shot. He drives a 389 Peterbilt
FSC Speed Shop yep your right I see it now.
Old petes got a Tiger!
Love the video, ltl stepdeck 🤑
Hi from the U.K. new to the channel 👍🏻 Jay U.K.
Excellent! Glad to have an international audience.
FSC Speed Shop Enjoying the channel 👍🏻
i subscribed, great vids.
Wow, a white buffering circle on your fuel filter gauge. How futuristic! Internet must have been slow then (or maybe it's now, not sure.)
That bumper is too shiny! Need to hit some deer with it or something.
1:20 Max.
2:35 Why is it so dark?
5:20 Why is it so dark?? I feel like I'm wearing polarized sunglasses.
First time commenting but I really enjoy watching your videos unlike some you keep yours real very rare to see those trucks out on the road she looks Amazing and sounds awesome now just a question are you going to put some wheels in the back? God Bless stay safe out there till next time from Oxnard California 🙋♂️🙏❤👍
Eventually. When I do it will be my way. Trust me, you'll like.
@@fsctrucking Can't wait great videos I've always loved Peterbilt cab overs I love the way they make them into long wheel base Absolutely Gorgeous.
Yep I gotta say that new bumper looks sexy.
I'm still getting used to it too
Awesome video and cinematography. Keep doing what your doing. You'll figure out your own way on here.
Just curious.... Plans to stretch frame? New paint scheme of freshen or just repaint old design?
hammer down 💪💪
At 5:57 like how it seems everywhere except California moves over for emergency vehicles on shoulder. QUESTION: New bumper no longer has holes to access tow hooks. What will happen?
Hook to front axle if needed.
@@fsctrucking Great. Hate to see your new bumper get all wrinkled and bent. Not that Orwell will ever need towing! Be safe.
You need to extend the chassis on the 362
Damn, it looks sick af ;DD
Sure wouldn’t mind buying that nice cabover off ya!
Nobody will ever pay me what I have in her. But perhaps one day. I did sell my 352, yet she will remain on the channel to be repaired.
Did anyone else hear that bang when he turned on the key
What is the fuel mileage like with that wonderful old girl? What ratio rearends?
Rolling coal brother.
LOOKING GOOD NOW MAKE THE KID START CLEANING RIMS IN THE REAR AND Painting them polishing the fronts think about paint nice truck runs good now make it look good luck take care be safe!
Can I ask what kind of cab box that is and where you bought it?
do you ever wash it.
Need sum wheels for that bad boy!
That fuel filter gauge looks like the fuel gauge on my 98 z71. Lol
It may be some of the slow start issues there. I'll dig into it.
You've got good movie making skills. I like your trailer mounted cameras. Do dealers sell all their HEMETTs? What do people want them for or do foreign armies buy them?
Love your videos as much as I love your old Pete, are those Hemmit trucks new or refurbished? Thanks.
It came from Oshkosh Truck. This one is titled 2020, but I think its refurbished at a high level. I could be wrong though.
The back looks short