I bought a cheap pair of long nose pliers and a metal file... I am going to attempt to customize them to look like yours... I think you should do a video...😆
Sounds like a lot of work, I just skipped that part... The small section of cotton between the inner and outer shell is clean anyway, and probably harder to replace since its so thin. I just rolled the coil over a 1/4" wood dowel, wrapped a strip of organic cotton pad around the coil then stuck it into the inner shell. Works just fine. I had to try a few times to get the thickness right. If you overlap the cotton try to make it the same thickness all around or the coil will be off center and look funny. I haven't used this organic cotton since I used to build RDA's, but it definitely has a different taste to it. Also to clean the coil I just held a lighter under it until it got red hot, then ran water over it. Clean as new.
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
Nice innovation..cotton in the midle make the most better taste..recommended..❤
I bought a cheap pair of long nose pliers and a metal file... I am going to attempt to customize them to look like yours... I think you should do a video...😆
Sounds like a lot of work, I just skipped that part... The small section of cotton between the inner and outer shell is clean anyway, and probably harder to replace since its so thin.
I just rolled the coil over a 1/4" wood dowel, wrapped a strip of organic cotton pad around the coil then stuck it into the inner shell. Works just fine. I had to try a few times to get the thickness right. If you overlap the cotton try to make it the same thickness all around or the coil will be off center and look funny.
I haven't used this organic cotton since I used to build RDA's, but it definitely has a different taste to it. Also to clean the coil I just held a lighter under it until it got red hot, then ran water over it. Clean as new.
you can use the wire part on a binder clip, you slide it in from the top on the two ridges inside and struck from the top
정말 흥미롭고 재미있는 영상이네요. 오늘 서브옴탱크 주문했는데. 나중에 한번 해보고 싶네요. 일반솜을 사용하신건가요? 그리고 건티슈는 일반 티슈 쓰면 되는 건가요?
What kind of cotton are you using? I cant find any that thin anywhere?
I have yet to see a video where they can remove the inner shell without some custom made tool.
Eine Frage : Welche Watte Materialien werden benötigt?
Thanks for the instruction.
Thank you so much, nice video
Autant passer sur un ' vrai ' reconstructible '...
Mais belle vidéo.
How do you know the cotton is thick enough, and get the two outside paper kindoff things from?
Vấn đề chính là tôi không thể nào kiếm ra cái kìm giống như vậy để lấy occ ra. Tôi cần 1 lời khuyên
Thank You
What is the inner diameter of this coil please reply 😤
Dzięki za pomoc ziomek xD
Udało ci się bo właśnie naprawiam i jak to zrobiles
What cotton did u use?
This is for Zeus X?
무인양품 겉에 감싸는 티슈는 뭔가요ᆞ?
저 롱로우즈 저한테 파시면 안되나요 따라하다가 죽는줄 알았습니다 ㅋㅋ
can u tell me which coil did u use ? or reused the same coil
코일 안쪽에 부분이 잘 안빠지네유...
Спасибо большое всё получилось
Ciao hai un indirizzo mail? vorrei chiederti delle cose a riguardo di una rigenerazione di coil mesh T-air di smoke
whats the name of that pliers ?
Long nose plier Handmade!
@@moya-zl1pb could I order your pliers? HAHAHA
돈이 없나?
설마?ㅋㅋ심심해서 하는거죠
말하는 수준봐라....좋은영상 잘 봤습니다 이렇게 말하는거란다ㅋㅋ
진짜 꿀밤 백만대 놓고싶네
저 죄송한데 일주일전에 베이프 입문을 했는데 고수님들께 질문이 있습니다...
코일 사서 교체하는것과 솜만 갈아끼워주는건 가격차이가 많이 날까요??