Thanks a lot. May i ask, you just recotton but keep the used coil right? If it's correct i must think about how to clean mine old coil ( the web metal part).
Wag nyo po pag sabayin ung dalawa.. Kahit san don pwd maging + or - Ung isa fold mo plabas.. Tpos ung rubber white and ung isa fold mo sa ibabaw sa rubber pgkatapos ung gold plate na pang lock nya
Wh@ up n d house my nigga..... finally I just might have found a bloke who knows how to rebuild the coils of a geekvape aegis x with zeuss tank yeah boy fuckn a..... one thing I'd love to know is where you get the cotton strips from I've been looking everywhere..... radical horse thanks for th@ now ill save the video to its own playlist.
Ok, you showed all the easy stuff. Now show how the hell you got the center piece out of the outside piece ORIGINALLY. Once it;s loose this is a piece of cake. I've tried on one of mone for days and it just will not come out. Show how you did it. The angled driver with a hammer tap is not it for sure. It need to be extracted styraight out or it siezes inside the outer shell.
AGREED. The only other video I found, the guy made some roughly made custom nippers to do a reverse grab from the inside where they can kind of hook on to the inner edge for some resistance. Otherwise... I'm sitting here at a loss.
You dont need more strip of cotton.. You need to do is to cover all 4 holes outside of the coil.. Try to see on 4:22.. Sample video.. Ill make it sure that it cover well to prevent leak
YOU ROCK!!!!!!!!! Thanks for sharing what you did as it helped me to see what I was doing wrong. ❤🔥❤🔥❤🔥❤🔥❤🔥
Thanks a lot. May i ask, you just recotton but keep the used coil right? If it's correct i must think about how to clean mine old coil ( the web metal part).
Yes thats right.. if your mesh coil is in a good condition just clean it and put it back again.. on my video is an option too.. hehehe btw.. thanks
Can you show you ORIGINALLY removed the inner shell? Your method shown here, as everyone has stated, is impossible on the first dismantling.
membuka coilnya serem, dari master coil tidak ada tool bawaan yaa gan
how many millimeters do you use a hex wrench?
Ka kapas rbk yg saya beli kurang lebar jadi liking terus mohon saran nya atau ling untuk beli rbk nya
Hello, can you give me the link where you bought this cotton? Im looking for strips like that and can't find. Very good job!
Online shop.. Loc.???? Are you in the PH?
What kind a rebuild kit the one u use for
I use pnp vm6 rebuildable coil.. just search it or order it from online..
Pwede poh makita Kung saan Naka point Yung dalawang stang ng strip kase po sakin nag check atomizer eh Baka Mali lagay ko
Wag nyo po pag sabayin ung dalawa.. Kahit san don pwd maging + or -
Ung isa fold mo plabas.. Tpos ung rubber white and ung isa fold mo sa ibabaw sa rubber pgkatapos ung gold plate na pang lock nya
Okay poh thanks
Wh@ up n d house my nigga..... finally I just might have found a bloke who knows how to rebuild the coils of a geekvape aegis x with zeuss tank yeah boy fuckn a..... one thing I'd love to know is where you get the cotton strips from I've been looking everywhere..... radical horse thanks for th@ now ill save the video to its own playlist.
Ok, you showed all the easy stuff. Now show how the hell you got the center piece out of the outside piece ORIGINALLY. Once it;s loose this is a piece of cake. I've tried on one of mone for days and it just will not come out. Show how you did it. The angled driver with a hammer tap is not it for sure. It need to be extracted styraight out or it siezes inside the outer shell.
Same here, won’t come out.
Did you find a way?
AGREED. The only other video I found, the guy made some roughly made custom nippers to do a reverse grab from the inside where they can kind of hook on to the inner edge for some resistance. Otherwise... I'm sitting here at a loss.
@@vapinggaming easy to remove need small hex tip and couple times hit not to hard in center middle corner
san ka nakabili ng rebuild kit? pwede pa send ng link?
Shopee lng po.. Search nyo lng pnp vm6 rebuild kit
Saan nkkbili sir Ng coil lng nya?
Vm6 pnp rebuildable coil po.. search nyo lng po sa shopee..
Anung coil yang pinalitan mo idol?
Rebuildable pnp coil idol.. ung VM6 0.15 ohm
What kind of cotton are you using i cant find any like it?
Im using rebuildable kit from PNP Coils VM6
what rbk you use
Vm6 rebuildable kit
PNP
Boss ano size gamit mo pang bend?
How much cotton you used in single rbk?
ive used 5 sheets but its leak after 1 hour
You dont need more strip of cotton.. You need to do is to cover all 4 holes outside of the coil.. Try to see on 4:22.. Sample video.. Ill make it sure that it cover well to prevent leak
@@itsmeremember1435 nah, i never noticed that when rebuild the coil😌, im only pay attention to the inside base
@@itsmeremember1435 did you ever do the dual mesh coil?
@@itsmeremember1435 thanks for the advice, maybe I'll try later👍👍👍
Ang hirap tanggalin boss ayaw talaga matanggal ng coil
Gnun tlga un boss matigas sa una.. Pero mahanap mo ung kiliti nya sandali lng un
Sa anung rebuild kit yang ginamit mo idol ?
Sa mga pnp coil rebuildable idol.. ung 0.15ohms gmitin kasi flavored tlga pra sakin
lods may link kaba sa shoppe kung anong cotton gamit mo 😁
shopee.ph/product/260233711/3757789706?smtt=0.68944847-1635227302.9
pakek rbk apa tu mad
Drag x vm6
san nakakabili sir?
Order po from shopee
@0:44. NOPE! Not how it works.