The Secret to Perfect Dados and Grooves / Woodworking
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- If you make dados and grooves at the table saw only using one blade, this clever table saw trick will yield you perfect fitting dados every time.
HELPFUL RELATED VIDEOS:
How to Make Blade-Width Shims - • Make Perfect Blade-Wid...
How to Make Perfect Half-Laps - • How To Make Perfect Ha...
How to Make Internally Splined Miters - • How To Easily Make Int...
How to Make Splined Miters - • How To Cut Splined Mit...
TOOLS SPECIFICALLY USED IN THIS VIDEO:
FastCap Zero-Clearance Tape - amzn.to/3HrU9gp
Forrest #1 Grind Flat-Bottom Blade - amzn.to/3sGzLlv
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
Looking for DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES, DOUBLE SIDED TAPE and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstor...
BANGGOOD WOODWORKING TOOLS: www.banggood.c...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com...
VISIT THE INSPIRE WOODCRAFT SHOP: inspirewoodcra...
Adjustable Box Joint Jig Plan: inspirewoodcra...
Multipurpose Shooting Board Plan: inspirewoodcra...
All Purpose Tapering Jig Plan: inspirewoodcra...
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoo...
PATREON: / inspirewoodcraft
INSTAGRAM: / inspirewoodcraft
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s TH-cam channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful. - แนวปฏิบัติและการใช้ชีวิต
Excellent tip! As always, great video too. If you haven’t heard it enough, you are an excellent teacher. Thanks for taking the time to make content like this.
couldn't disagree more. this is soooo poorly explained. had to sketch it out to understand what is going on. filming from the operator's POV would help a lot.
Love that you show how to make things fit without measuring anything. Thanks for the great info.
I also agree. You are my woodshop inspire professor. Seriously, thank you for your clear concise teaching. I’m new to woodworking and primarily watch your channel. True blessing.
I grew up in Chesapeake
Genius!! SOOOO glad TH-cam keeps populating your videos into my feed. This is one of the FEW channels I will stop whatever I'm doing and watch. Thank you sir for another great video.
"Shim"ply great explanation of a great tip! I've been enjoying your channel.
Brilliant! I love the way you come up with simple easy to understand ways to make very effective jigs. As a beginner woodworker this is great! Thank you!!!!!
Wow! As usual you provide awesome content that is practical and improves my woodworking. Thanks.
Witchcraft!!! Lol. I had to watch it twice to understand what was happening. I really enjoy watching ways to do thing that doesn't involve measuring. This is great thank you.
Fantastic.
Whatever money your making from TH-cam is definitely earned and deserved.
It took me a couple watches to figure out the mechanics of exactly how making the shim worked. Now that I understand it, I think it's brilliant.
This is a great tip! Thanks for sharing. Another way to get a shim rather than making one, is to find some slats from a standard 2" wide plastic vertical blind set that you can purchase off the shelf in Lowes, Home Depot, Walmart, etc. The slats are the exact width of a saw blade. I use the extra slats that I removed from a 44" long blind when I was fitting it to my window height; although you could really use any length you prefer. I have multiple slats on had and when I make my dados I just add slats one at a time on each pass until I get to my desired dado width.
Thanks. I was wondering what material I could use without making the shim and wasting material.
hey man, your videos are really making me a smarter carpenter everyday. keep them comming bro. dont stop the grind !!!
You inspire always. I have been following your videos for a while now including the first time you came up with the blade width shim idea. I admire you taking that concept and demonstrating its applications. Keep up the great work.
Hey, thanks for these videos. I don't really see any other channels teaching these really helpful methods for super precise results.
Over and over and over again, YOUR INFO IS SO VALUABLE!! GREAT tip that transfers to countless projects! I watch a lot of woodworking videos on TH-cam - there are none more valuable than yours. Cheers and THANK YOU.
Man this is an epic tip. I hope you smile when you think about how much you help people that share your obvious love for wood working.
I’ve learned so much from you in the last couple of years that every time a new video pops up I know that I will learn something new. School days 🇮🇪
Man I love your content. The more steps you remove, the more measurements and marks you remove, you get more accuracy. I can't wait to make shim sets for all my blades now.
It's like a GIANT kerf maker! :) But TBH, the trick you taught me that saves HOURS is how to rip off the double stick tape! G.E.N.I.U.S!
I've enjoyed all your videos, but the no measure cut videos are excellent. Thank you!
Great video. I pressed "Like" 3 times.
Very informative and no BS. Great video Bob. Nice to see as of this video, all digits are still present.
Genius. That tip will save.e tons of time trying to get setup just right Everytime. Great stuff...keep it up
I’ve got a whole bunch of shims made by your previous method that I use for splines on my mitres. This, once again, is excellent!
Really fantastic tip! 😃
Thanks a lot, dude!!!
Stay safe there with your family! 🖖😊
Every time you show these techniques you seem like a magician. Thanks for sharing your knowlegde
my shop teacher back in the day...30 plus years ago was really good...you sir, take it to a whole other level. thanks for sharing. always learn something new from your videos.
I saved this video on my TH-cam shop playlist when it first was posted, knowing that I would use it in the near future. I just had reason to use this method for the first time, and I am declaring it pure genius. I was fabbing a divider assembly for storage of tall, thin pans and cooling racks. I wanted to use some "1/4" birch plywood from the big box store for the vertical dividers. The stock measured about 0.205, so routing the many "1/4" slots on the 1/2" base was not possible with other than a 1/8" bit, which I am not keen on using. Cutting all the grooves in the base to accept the vertical panels was a breeze on the table saw using this "blade kerf" method for nailing the width of the grooves. Many thanks for sharing this method.
Taking the previous shim up a notch!
Awesome, thanks
This is genius. I have a kerfmaker jig for dados, which I always considered to be fairly simple and mostly accurate, but this is even more straightforward and dead on perfect. The adjustment screw for the saw kerf on the kerfmaker is not as accurate as making an exact shim like this. Well done 👍
That is so clever! Maybe this is a technique that every experienced woodworker knows so well, they’ve forgotten it’s not obvious. But in ~9 months of watching woodworking videos on TH-cam, by most or all of the usual suspects, this is the first time I’ve seen it. Really well explained and demonstrated. Thank you!
Leaving the 4" had me confused. Thanks for saying why in the end. Great tip.
a great tip. Replaces the kerfmaker. Nothing can change here. thanks for the explanation. Greetings from germany
That’s bloody genius - no need for expensive dado cutters and spot on accuracy too 👍
Brilliant ! you keep surprising me with your "Inspiring" tips. Keep them coming Jodi
That video where you showed making shims worked well for me. I used that method again a few days ago. Today I am planning on making some more shims but these are going to be thicker than the 1/8" blade I normally use. I was going to use the 'creep-up method' but instead I will be using the method shown in this video.
Thanks, again, for showing us some interesting and helpful tips.
I'm going to echo all of these other comments. Great and useful tip. Well explained and demonstrated. Thanks for all you do!
As ever, brief, concise and informative. Just gotta say, every one of your videos raises my game - Great Job 👍
Very nice update to original method !! Still so very impressed with this method...... Thank-you
Thanks for the helpful information on another way to cut accurate in a simple way 👊👍
You are brilliant!
I love your pursue of the concept of "accuracy without measuring tools", or I should say "perfect fitting without measuring tools"
You keep demonstrating that there are so many practical ways of precisely measuring and fitting as a first approach, and a the measuring tools are just as a reference to a "measuring unit" (inch, meter) for approximations and for standardization purposes.
^THIS^
Brilliant tip but better yet, thanks for taking us through the steps of making it work and explaining it carefully. Keep up the great content.
Duh. Been playing with wood for a very long time and see such a simple setup. Hats off to you,😉
Excellent tip. I cannot use a dado set as the arbor on my saw is too short, so this method will allow me to easily make exact dados. Thanks for sharing this.
Great tip. I will likely watch many more times as it is not quite sticking for me yet.
So much amazing and concise content from one creator! Keep it up!
Although it seems intimidating I see other woodworkers talk about frustrations they find trying to make perfect shims and I always comment to watch your content! Tomorrow I’m giving possibly both versions a try because I’m going to be making bridle and half laps and a perfect shim would make my cuts accurate and consistent. Hopefully it works out, if not that’s not your technique that’s my level of skill. Thanks a bunch
Josie you always come through with the great tips. Another winner.
I'm going to have to watch that again several times to understand the process exactly but I love your tips like this!! You do an amazing job and I love anything where I don't have to math the heck out of something or spend forever trying to get to the perfect cut!!!
This is simple genius! My coffee hasn’t yet conquered my sleep deprivation but I will understand this better soon enough
Really one of the best technic in woodworking, which I saw ever.
Thanks a lot!!! 👍💪
Another awesome tip thanks again for sharing I feel like déjà vu 3 tips in under 5 minutes and I just subbed
Can always count on some great tips from your content...thank again..
Thanks - I recently subscribed to your channel and I enjoy how easily you explain things. Detailed and in layman’s terms . Double Thumbs up !
Absolute genius. Take it from me, I too have been called a genius.
Awesome tip- wish there was a quicker/easier way to make the shims the right size (without using and cutting up so much extra material)- but awesome idea. Could you use an old identical dull saw blade to set the fence, and just rip a shim the correct size that way?
This is brilliant. Solid explain explanation of the process and the reason behind it. A fence based Kerfmaker!
I am with the rest of the comments. This is another really useful, clear, no-*hit video. Many thanks from the UK.
Clever, and very useful! Thanks for sharing! 👍
Thanks for another great tip, I agree with A.Quattrone when he mentioned about your teaching skills. Thx for sharing
an education,superb methods,its the way forward
Simply genius.
ANOTHER great table tip~! So glad that I found your channel. New subscriber here~!!
Yet another brilliant tip from you, thanks! I always learn something new or a better way of doing something from you’re well put together videos. You’ve definitely helped me become a much better woodworker & it’s much appreciated!
Great video and great idea making different shims for different blades. As soon as it warms up above 25 degrees I’m going to do this.
Haha, I was thinking the same thing - great tip, but too cold in my shop to even consider this right now!
Saw your video on pencils, very informative. I personally use the Bic mechanically pencils. They twist feed and I have had great results. Not knocking what you said, these are cheap and work fine. Great videos, keep it up. Thanks, Mike.
Great tip. Haven’t seen this one before.
Damn brother your channel was well named because you are indeed inspiring. Even if I'm not necessarily going to work on exactly what your doing, you always make me wanna get in the shop. Appreciate you man!
Great video as always mate, thank you. 👍
Very helpful ! Thank you.
Been loving these quick tip videos recently, info dense and all super helpful. Keep killing it!
Absolute Gold!!
Love this kind of content. Tips like this are really valuable. I tried a bunch of stuff for dados (e.g. kerf maker) and this shim is the simplest setup, quick, and flexible.
That's an interesting way to do dados. I've made and used a kerf maker, but this is much easier and better for longer dados. Thanks.
Great idea. I love the zero tape measure approach you are taking. I made zero clearance inserts for all my blades and labeled - time to add a shim for each. Now I need to find a storage solution!
Always very ressourceful, keep them comming
You're a clever guy 👍
Such a fantastic tip. Thank you for this.
Dude, your videos are awesome! I am always impressed with your techniques. Great job, sir.
Very neat trick !
Thank’s
Thanks for sharing useful info.
Dude! This is awesome!
WOW. Awesome tip.
Great information well presented.
Not everyone has the extra $200 just laying around just waiting for a hole to burn through their pocket, but just in case Woodpeckers Rip-flip is great for such tasks ..I got mine as a gift so I wasn't out the $200, but in hind sight I'd spend $200 for it in a heartbeat. You can dial it in to any width or thickness in a matter of minutes or even seconds if you're already close to begin with. Very ingenious design by Woodpeckers..
I’ll be honest. That all kind of went over my head as far as how to make the shim, and how that translates to perfect thickness cuts. I’ll have to watch a few times it even try it myself as a test to make sure I understand. I trust that it works b it the video went a little to fast for me but that’s my problem not yours. Credit to you for these methods you have of getting perfection without measuring!
Stick with it, I made a half lap joint yesterday to try out the blade width shim method and it worked perfectly. I have never cut a half lap, half as close fitting.
Yeaf, I've already watched it twice, and I'll watch a couple more times before I do it in the shop. Seems like a great method to me.
I'm no stranger to the wood shop but this somehow has me scratching my head. Somewhere between flip and swap I'm missing it. I see great results and I'm hoping I will suddenly see it clearly but for now....???
@peter wall I'm sorry! I even tried to slow down a little!
@@InspireWoodcraft hey buddy, no worries I have no problem admitting that sometimes simple things go over my head. I also know that somethings are easier to understand for when I try it. You did what you could but not everyone can understand everything, it’s no fault of yours!
Brilliant, thank you
This is a great idea! Thanks
We can mark the work piece with pencil line, make the first cut then move the fence closer a distance equal to the blade width and align it to the pencil line made earlier and make second cut
Great technique!
Many Thanks. I like how you think, and explain.
Brilliant, well presented.Thank you
Great job Jody, super useful tip.
Dude, you rock
Another great tip. Love the preemptive strike on the safety police comments. 🤣💪✌
Hi Jodee! I love your unique approach of doing things by "applied math" to get perfect fits instead of measuring or trial and error to get "close enough". Could you expand on this method and make a video for a finger joint jig on a tablesaw WITHOUT a dado stack? The thing is, dado stacks are hard to come by in Europe, if not outright illegal (and, frankly, pretty intimidating). The elements are all there, as far as I can see, the perfect dados as wide as the material, the blade-width shim... All you need is to take a piece of that shim and use it as a stop on a piece of plywood, and you could mount it on your sled and have an easy but accurate, freely adjustable finger joint jig. I'm sure you could figure it out...
Killer. This is perfect, considering I finally have a table saw to do my cabinet joinery instead of a router like I used to. Router takes ages
Awesome...thank you!
This is so damn simple it's ingenious. Thank you.
Homemade kerfmaker!