Or just skip all this exterior CarPlay crap and buy an actual CarPlay system for your car. It’s easy to get on eBay for your specific car and the backup camera is not that hard to install or have a buddy do it.
@@babadelis444 even better splice it into the reverse lights so it only turns on when your reverse lights come on. i believe the connectors are called T-taps you just clip them on. thats what i did when i connected mine
So how does the camera activate and show on the screen when the car is put into reverse? Or is the camera always active and you just need to change the screen to view camera?
You dont have to take out the lights. It would just be a little lose since its not plugged in all the way because the wire is through the light hole at least its what I did with my car and no ticket yet
Yeah I never knew it was illegal. My license plate light was dead and I was driving without knowing the light bulb was dead so I got pulled over. Thought the cop was playing games and I got a warning.
You connect the camera to your reverse light wires. So when you reverse, the camera turns on, which the screen senses and automatically shows the camera view.
No one who goes through all that effort is going to have a giant plug jammed I to their cigarette lighter. All cars have a fuse box and there are adapters to wire it to that.
If ur going through the trouble of running a back up cam wire, might aswell do full install on a cheap headunit since you'll be popping panels off anyway
JESUS CHRIST THANK YOU!!!!! The instructions on the one I bought didn’t cover it, so many videos don’t cover it. They just say “now mount the camera” and I was at a loss. YOU PUT IT THROUGH THE LICENSE PLATE LIGHT HOLE
so basically you have to wire it into the backup lights for your car. its not east work, it requires knowledge of wiring. anyways, you connect the cable to the backup light so when you put the car in reverse, the backup light gets power, therefore powering the backup camera and telling the "drivemate" that you are in reverse.
You have to solder the brake light wire to the backup camera so that when you reverse, it triggers the backup camera to turn on. Otherwise, you will have a continuously running camera that might as well be a rear dashcam.
@@Sam-k271 Hell, you don't even need to soldier it. Strip the plastic and twist them together. Electric tape it, and you are good to go. Soldiering is not easy for a lot of people.
But this is just basic install I need to know how do I do this with the parking lines and wiring on the sensor, having my first car and it is an Opel Meriva aswell lol
To have to hook a wire to the reverse light to tell the camera when to come on LoL no he didn't explain it well at all because he wants you to think it's that's easy for the people that might be put off by that. It's still a good buy even if you can't figure out how to install the camera.
umm no this is prob a very tacky way on how to do it, first off that device to replace your head unit is not it, you shoulda got one that replaced the old head unit and you woulda been able to reconnect the wires into the area where the car know when to enable it’s reverse lights so whenever you put it in reverse the cars head unit display will also enable the camera making it feel more oem/factory and eliminating the need for random wires dangling around
I like how you didn’t actually explain how to do it
You just run the wires and mount it lol
No need to tap into reverse light. Just wing it bro
It's easy, learn it
Plus minus and video cables 😮
Get off the internet little girl
Bro skipped actual installation and proper wiring (which requires disasembling multiple parts of the cars interior)
This part!!!
depending on your car which is why you do your own research
Yeah this is a low-level install.
Or just skip all this exterior CarPlay crap and buy an actual CarPlay system for your car. It’s easy to get on eBay for your specific car and the backup camera is not that hard to install or have a buddy do it.
Hey, don't forget that you need a way to activate the back up camera. You could splice into a taillight for example
How do you do that mate?
@@babadelis444 even better splice it into the reverse lights so it only turns on when your reverse lights come on. i believe the connectors are called T-taps you just clip them on. thats what i did when i connected mine
@@TkShark thanks ill try
@@TkSharkis there a video that u recommend
@@nickilema1074 th-cam.com/video/rHORKUqlEM4/w-d-xo.htmlsi=mTYxFgcqLLB6euAE I think I used this one
Oooooh so impressed with installation. Now how about a video showing how to actually install it.
So how does the camera activate and show on the screen when the car is put into reverse?
Or is the camera always active and you just need to change the screen to view camera?
Solder the red wire to the rear brake light wire. It will then trigger when you backup your car.
Wtf If you tap on to your brake light, it will come on every time you hit the brake. You gotta tap into the reverse light
@@jerbsherb4391
To the brake lights?? 😂😂
Please don’t give automotive advice to anyone ever again.
Actually, just ANY advice for that matter 🤦🏼♂️
@@jerbsherb4391 the fact that you got 4 likes for dum ass information bothers me 😂
@@rajdattani1507not the brake light, connect it to the gas pedal bro 😂😂😂
Bruh you’ll get a ticket if you’re missing a license plate light in some states
You dont have to take out the lights. It would just be a little lose since its not plugged in all the way because the wire is through the light hole at least its what I did with my car and no ticket yet
Yeah I never knew it was illegal. My license plate light was dead and I was driving without knowing the light bulb was dead so I got pulled over. Thought the cop was playing games and I got a warning.
I like how he demos in one of the few older vehicles that can support factory CarPlay.
Picks the only car from 2011 that actually supports a oem drop in CarPlay update
I think you left out a few dozen steps.
Can you show a complete video of going to set up fm to the speakers
For the car play part, will it connect automatically to the speakers in your car?
The player can transmit FM signal. Just search the FM signal on your radio to use the speaker in your car
Vacuum that car dude
😂😂😂
How the car knows when you are reversing?
You connect the camera to your reverse light wires. So when you reverse, the camera turns on, which the screen senses and automatically shows the camera view.
Tell me the model of that camera
No one who goes through all that effort is going to have a giant plug jammed I to their cigarette lighter. All cars have a fuse box and there are adapters to wire it to that.
If ur going through the trouble of running a back up cam wire, might aswell do full install on a cheap headunit since you'll be popping panels off anyway
JESUS CHRIST THANK YOU!!!!! The instructions on the one I bought didn’t cover it, so many videos don’t cover it. They just say “now mount the camera” and I was at a loss. YOU PUT IT THROUGH THE LICENSE PLATE LIGHT HOLE
Ive looked online everywhere and there are no videos actually explaining how to set it up this is genuinely pissing me off
You and me both
me too :(
so basically you have to wire it into the backup lights for your car. its not east work, it requires knowledge of wiring. anyways, you connect the cable to the backup light so when you put the car in reverse, the backup light gets power, therefore powering the backup camera and telling the "drivemate" that you are in reverse.
Just go to a shop
I like this because I went and bought a second camera (backup) cam for the front. It already had a reverse camera
I don’t got the part that makes the actual camera work when I put the reverse. I’m trying to install it right now
The camera meets a signal to tell it when you’re in reverse. If you attach the power/ signal wire from the camera to your reverse light positive wire
whats this CarPlay called? also the caemra brand? thx
Dude has pointer fingers for thumbs
😂☠️☠️
bravo straight to the point LMAO.. that's technically how to do it minus the cable management ;-)
You have to solder the brake light wire to the backup camera so that when you reverse, it triggers the backup camera to turn on. Otherwise, you will have a continuously running camera that might as well be a rear dashcam.
You meant solder Reverse light and brake light together with backup cam wire Or solder backup cam wire with just brake light ?
you connect the backup cam's auxiliary line to the brake light so that when you brake it tells the rear cam's full screen to turn on.@@Sam-k271
@@Sam-k271 Hell, you don't even need to soldier it. Strip the plastic and twist them together. Electric tape it, and you are good to go. Soldiering is not easy for a lot of people.
@@jerbsherb4391and not many people have it
I like the part where he says "Go check it out" 🤲
Can u install on motorcycle
How do you connect it to car sound system
There is a red wire attached to this cable you plugged it to the device, where did you put it please?
Camera connector is the same as a 3.5 headphone?
Yeah. It's an analog signal I think
Bros winning all thumb wars
Okay and what if the car is so old you don’t have a license plate light?
Thanks, i ordered a camera for my atoto s8 thats a good idea..
How do we turn off playback speed of 5x and see where you actually show HOW to install??
No speakers right?
Nice work. Can this also be a front cam?
It can’t be as front camera
just use your eyes...?
Hey thanks for the vid bud. Does it affect the vision somehow when you don’t install the camera at the middle?
Im doing this in a few days, just not sure how to since some websites say i have to take out the reverse light and strip a wire, its confusing
But this is just basic install I need to know how do I do this with the parking lines and wiring on the sensor, having my first car and it is an Opel Meriva aswell lol
Amazon link?
How does the android auto connect to the speakers? The only benefit of android/apple is the music apps
Possibly bluetooth or aux?
Does it support Android
How is the night vision ?
But did the back up camera turns on once you put the gear in reverse?
Love how you can’t even see the road with it.🤣
For me in having trouble is talking the damn mount to the back of the monitor bro it’s not clicking
Don’t have the marketing people make the technical support videos, they are idiots.
If only it was this easy 🙄
When I go to camera it says that have no signal
How does it know when your in reverse if it’s only connected with a cigarette port
People in the comments are saying you need to wire it to your reverse lights that come on when switching your car to reverse
How do I adjust the volume?
Backup camera does not work it keeps shutting the screen down
I think the term 'rear camera' more technically correct. Any how, thanks for the video
Do I need a iPhone?
It’s crazy cause he did kill the guy, had he would’ve not left the scene he probably could’ve still claimed self defense they did jump him
why didn't I think of that.. I was wondering why it came with wires😂
A little bit slower next time 😢😂
You’re like an old 78 record played at 33 rpm.
If you could say that a bit quicker please....
Name the project😮❤
Link
Why he saying “drive meute”
To have to hook a wire to the reverse light to tell the camera when to come on LoL no he didn't explain it well at all because he wants you to think it's that's easy for the people that might be put off by that. It's still a good buy even if you can't figure out how to install the camera.
Your gen ford edge already has one….
So im now more confused after watching this video? Like there was no explanation of "how to instal a reverse camera" 😂
How do u kind ur crust dirty car tho
What even is this product
umm no this is prob a very tacky way on how to do it, first off that device to replace your head unit is not it, you shoulda got one that replaced the old head unit and you woulda been able to reconnect the wires into the area where the car know when to enable it’s reverse lights so whenever you put it in reverse the cars head unit display will also enable the camera making it feel more oem/factory and eliminating the need for random wires dangling around
lol. theres no steps shown
What about airbag safety. Looks like you dont care airbags.
or just do it properly and get a real stereo and a properly wired rear view cam.
100% sure he didn't do it in less than 5 mins. Complete BS.
How about how to clean your car?😂
I just look up cars all I said😂
But you already have a screen in your car
A/V?!
NO
THAT SHIT IS 480P MAX
Why does everyone on yhe internet aound the same it seems.
Boo! You didn't show us an installation.
Banger songs
that car is a skip inside
So how can you that😂
🔥🔥🔥
In summary, how to wire your backup camera in a single step:
Step 1: wire it.
Videos like this are such a waste of everyone's time...
its too expensive tho
What did you say
😵💫
You speak to bloody FAST
How does it know when the car is on reverse?
don't need to know camera it's always on yoy can even check cars behind you
"5 mins"
Thanks for nothing 🙄
Useless video. Didn't explain anything
uselss vidoe
Speaking to fast ffs
Useless nothing helping at all talking too much
Clean that car ffs..
Fast mumbling, maybe get at different job.
So generic
#stopdropshipping
Slow tf down
....Silly..
Horrible product don’t buy
Trush installation