another stunning build Cory bro, that 4080 squeezed into that case lol nicey niceee... you gonna go all out on 3rd build ? external tubing and fans ? cant wait for what ever you do :) ........ p.s i hope they start working on making graphic cards smaller in future, before long they will be stand alone outside the cases lol
Hi, I really like the build you've done, but I am concerned about the clearance for the GPU. I would like to know if you used the newer version of the chassis, which is the Corsair iCUE 4000D Airflow RGB. This version has much less tint compared to the original one, which was too dark to see inside the case.
Great Job my man! Question: I can't feet the fans and radiator in the front, so I thought just like I saw in your video that I should unscrew the fans off the radiator and screw the radiator first. Then screw the fans on the radiator. BUT how did you manage to put the lowest fan in? there is no space to work the screws in(not the holes, but where to stick your hand with the screwdriver)
that's wonderful build as always, but i would change the AIO rediateur on the top of the case and i put the fans in the right side of the case Good Job
aio wont fit top without low profil memory sticks so he put it in the front with the tube coming out on top...which is not really good...the tubes should come out from below but in this case its hard...best option is top aio with low profil memory
Hi can someone explain how his 4000d airflow comes with 3 rgb fans pre-installed if everywhere i look the 4000d airflow comes with 2 preinstalled (i think no-rgb)fans?
I dont understand the AIRFLOW here, the Radiator will throw air outside so there is no fan to suck in air, every fan is throwing air outside How the AIRFLOW will be maintained here, please do clarify
The front mounted fans on the radiator are reversed to suck in, original 3 front panel 120mm fans were repositioned to push out top and rear. Smoke test at the end of the vid demonstrates this nicely
I ain't sure if its me only, but the videos back then without the unboxing sound of the actual work seemed better🥲🥲maybe I'm just used to the older version , good work though💯💯
This dude needs more recognition, his editing is crazy good.
facts
4080: it doesn't fit...it fits...it doesn't fit...it fits :) Nice work.
Haha very close! This GPU was made for this build 🤣🤣
@@DesignsByIFR legit question: is it not bad to have the gpu fit so snug?
in terms of temperature and air flow
Amazing build as always
Love your videos
another stunning build Cory bro, that 4080 squeezed into that case lol nicey niceee... you gonna go all out on 3rd build ? external tubing and fans ? cant wait for what ever you do :) ........ p.s i hope they start working on making graphic cards smaller in future, before long they will be stand alone outside the cases lol
Yeah its almost like this case was perfectly made for that GPU 🤣🤣 glad you enjoyed it =)
Hi, I really like the build you've done, but I am concerned about the clearance for the GPU. I would like to know if you used the newer version of the chassis, which is the Corsair iCUE 4000D Airflow RGB. This version has much less tint compared to the original one, which was too dark to see inside the case.
Dang solid build. Really love intel with nvidia rtx on it, I wish i had money to build this kind of pc specs
Another absolutely killer build, Corey. You never fail to amaze me with your exemplary builds and skills. Fantastic work as always my friend.
Great job Corey like always
love the unboxing sounds :P
BOMBOCLAAT what is that edition bro, soo nice to see
the editing is crazy
Not sure if you’re going to reply to this or not, but is there any reason as to you why you didn’t top mount the AIO?
The maximum at the top is 240
Isn't it 280?@@efianosloco1145
@@rafaj1237his AIO is 360 top mount for case is 240 or 280 but with that ram and mobo 280 won’t fit
never knew that kind of "anti-sagging" gpu holder before.
Great Job my man! Question: I can't feet the fans and radiator in the front, so I thought just like I saw in your video that I should unscrew the fans off the radiator and screw the radiator first. Then screw the fans on the radiator. BUT how did you manage to put the lowest fan in? there is no space to work the screws in(not the holes, but where to stick your hand with the screwdriver)
En la parte superior le entra una refrigeración líquida de 240mm? No le chocarían los slot de la ram?
It fits that’s what I have in mine
Curious why you didn't put the SSD under the Thermal Guard III slot?
I also built an RTX4080 PC using the same SSD...
Only, I used the 7800x3d instead as I couldn't afford the 13900k
😅 my 4080 is also THIS tight!
that's wonderful build as always, but i would change the AIO rediateur on the top of the case and i put the fans in the right side of the case
Good Job
Thanks!
aio wont fit top without low profil memory sticks so he put it in the front with the tube coming out on top...which is not really good...the tubes should come out from below but in this case its hard...best option is top aio with low profil memory
The maximum at the top is 280 You will never succeed with this case
@@mathieubarabe4903 Tubes out of the top is perfectly acceptable as long as the CPU is below the top of the radiator.
great editing
6:38 had me dead
Quick question if you still remember anything anout this build. Using the front miunted 360mm rad can you still use the USB's on the top of the case?
sure.
does the radiator of the "H150i ELITE CAPELLIX XT" fit on the top of the case (4000D) without causing any trouble?
4000d only allows for up to 280mm radiators on top, 360 only in the front
@teogarciav that's sad but thanks.
Why do your videos never pop up in my recommdned even though i turned on notification lol
Because youtube sucks now
Same here
TH-cam doing youtube things =/
i would have put the fans on the other side of the raditor
I wanted to see the lighting personally
Hi can someone explain how his 4000d airflow comes with 3 rgb fans pre-installed if everywhere i look the 4000d airflow comes with 2 preinstalled (i think no-rgb)fans?
4000D icue model i think
The casing is beautiful..🎉
RM1000e a much looked over but formidable PSU
♡♡♡
I dont understand the AIRFLOW here, the Radiator will throw air outside so there is no fan to suck in air, every fan is throwing air outside
How the AIRFLOW will be maintained here, please do clarify
The front mounted fans on the radiator are reversed to suck in, original 3 front panel 120mm fans were repositioned to push out top and rear. Smoke test at the end of the vid demonstrates this nicely
@@koosman2903 Yeah, i judged him too quickly
what’s FPs you running
Is it me or are all the fans set to exhaust
Had to look deep into the comments to see if anyone else noticed. No fresh air going into that pc but you got lights..
@gc7070 Pay attention to the smoke test at the end. Front fans mounted on radiator are pulling air
240 or 280 aio would have been better in this build as hoses on top of the rad is not ideal.
Why cant you put radiator on top?
Not enough room for that size radiator.
240mm max in this chassis
Are there problems with this front radiator configuration?
What psu extensions are those?
4000d or o11 mini
dream...
=)
Those RAM sticks are taller than me
Why intel? Would have gone for 7000 series with an x3d
What would have been your reasoning for the x3d for this particular build?
@@DesignsByIFR Better gaming performance
I actually went for intel because this is the parts i have on hand, it would cost too much to have to buy the x3d.
The IO on highest point of the System 🫣🫡RIP
at least that gpu won't sag
Thats very true 🤣
It's got that extra fan support 👉👈
Looks kinder undefined, or you wanted to go RGB or no RGB.
noiceeeee
♡♡
Bro u build so many PC's.. it will b nice if u gife me 1❤
=)
bro the gpu barely fits xd
Second...
=)
I ain't sure if its me only, but the videos back then without the unboxing sound of the actual work seemed better🥲🥲maybe I'm just used to the older version , good work though💯💯
We will have more my friend =)