Very nice! You have a very fluid systematic approach which is the key to a quick set up time. I am hoping the rack I built helps cut my time of 30 mins down to between 15 and 20 seeing I have saved some steps with it. Once again very nice! Take care man.
Question here please. We had a party 3 months ago The dj had his set up in infron of the salon. There was about 100 or more in a big salon . He had 2 x15 EV inch loud speakers and with 2 18's jbl subs. Great great gear. When I walk around getting guess and when at the end far table all I could hear was bass with no music at all. Next month we had a bigger pary and we hire another DJ. And pay him way less money and the music sound it everywhere. Why was the music not loud enough in the back with our first dj
Dope setup Boss. Its unique. Hey Rick whatever happened to the Denon Prime 4 that you reviewd a while back.? Do you still have it? Coz it doesn't feature anywhere in your vids.
I love the DJ furniture because they look elegant but ....what I've never been a fan of is having to put a facade behind you to hide the equipment. It really seems opposite of the whole idea... The reason you got DJ furniture is to give a more elegant appearance so you take the facade out from in front... To then just put it behind you??? 😅 Because of the little creativity and cables you actually could have all that pre-installed and your DJ furniture.... And literally all you would need to do is run wires from that to the speakers with no need for a facade behind you.... That's what I did When I built my DJ furniture...
Just make sure you have triple security on that garage, If neighbours are seeing some fancy equipment being shown off every weekend, welp some bad people might see it.
@@DJRickWeb absolutely the best way , having subs in the middle together in most situations..coupling and bass in the middle of the floor rather than a bass valley in large rooms. Having a short power ling cable though for situations where you set up like in the video can simplify wiring and make set up even faster.. Great videos my friend.
LOL I came here to post this same thing. you dont need to wear a mask if you're at home dummy. only if you are out in public in stores and crowds. lol what a tool!
do you still have the nlfxpro pannel for the Bunn booth if you do put it back on and add a CyberLink rackmount powerstrip to the rack part to add the power ports down there useful and so you have a patch port pannel
Hi, Love the videos!! Do you have a video that shows exactly what power source I can use to connect my Pioneer DDJ 1000, 2 Speakers and my Mac in a remote Location outside? Thanks in advance 😊🙌🏽
In this case yes. For an actual event it would be split between two circuits if possible. The vrx subs dont like being plugged into any power strips or conditioners either. So normally they will be plugged straight into the wall
The dbx drive rack is compatible with range systems. So sense he built the rack out it was easy to fully wire the driver rack to the patch panel in case he ever needed it
Why not? With led lights these days the power consumption is so low that you’re unlikely to ever trip a circuit unless you have a full concert worth of lights to run
@@DJRickWeb yeah i was fairly certain you knew it , but better to state the obvious as all kinds of people watch these and someone might think its a good idea to have audio and lighting on the same circuit
Yaaaasss that was sick that u had a TV FLAT screen in back
Love it!!! What’s the actual weight of that DJ table with Ranes and Mixer inside?
Over 100lb not sure the exact weight. With out the players it feels like it's about 80 to 90 lbs.
Very nice! You have a very fluid systematic approach which is the key to a quick set up time. I am hoping the rack I built helps cut my time of 30 mins down to between 15 and 20 seeing I have saved some steps with it. Once again very nice! Take care man.
You beat dj barrs time not had 🔥🔥
great video rick. also liked the DJ Life mask. I think i might just order a mask.
Love your cable management!
Question here please. We had a party 3 months ago The dj had his set up in infron of the salon. There was about 100 or more in a big salon . He had 2 x15 EV inch loud speakers and with 2 18's jbl subs. Great great gear. When I walk around getting guess and when at the end far table all I could hear was bass with no music at all. Next month we had a bigger pary and we hire another DJ. And pay him way less money and the music sound it everywhere. Why was the music not loud enough in the back with our first dj
Looks awesome. Always enjoy your content.
I’m ready to see the audio rack in action rick you are my dj inspiration
Champion Dj!🎧🎧😎😎
Nice job great setup
Nice ... that's a quick set up!
Bad ass setup the VRXs though 🔥💪
Great Job Webb!
Atta boy rick
Nice
Second. Keep up the great work!
PAN YOUR MIXER INPUTS!!!! Take channel 1 and wack it to the left and channel 2 and wack it to the right. Otherwise, it will be mono!
I run my setup in mono.
Chill. I haven't done a gig yet or even ran audio through the rack yet. It's just put together.
@@DJRickWeb Yeah i was thinking that. I just wanted to make sure lol
Dope setup Boss. Its unique. Hey Rick whatever happened to the Denon Prime 4 that you reviewd a while back.? Do you still have it? Coz it doesn't feature anywhere in your vids.
It was just a demo unit I never owned it
Nice! Does your garage have HVAC? Have you had any issues with keeping electronics stored in unconditioned space?
Dehumidifier to prevent moisture on electronics. That's about all you really need as long as your garage doesn't reach 110+ which mine doesn't
Nice job.
You are really fast.
You inspired me to try this, too. But I think I can't beat you or DJ Barr😂
I am not fast. Just efficient
Neat setup
...this challenge will not work in my neighborhood .. garage or storage would get robbed with this type of challenge lol
I love the DJ furniture because they look elegant but ....what I've never been a fan of is having to put a facade behind you to hide the equipment.
It really seems opposite of the whole idea... The reason you got DJ furniture is to give a more elegant appearance so you take the facade out from in front... To then just put it behind you??? 😅
Because of the little creativity and cables you actually could have all that pre-installed and your DJ furniture.... And literally all you would need to do is run wires from that to the speakers with no need for a facade behind you.... That's what I did When I built my DJ furniture...
Just make sure you have triple security on that garage, If neighbours are seeing some fancy equipment being shown off every weekend, welp some bad people might see it.
Lol. Theres probably 100k of gear in there. You dont think I spend a good chunk of change on some badass security?
Didn't mean to be rude or anything. I'm sure you know what you're doing :)
do u have to have a dj controller i just want to play music from a laptop to the speakers with lights
Yes i have one
@@DJRickWeb bro
Notification Squad FTW
just interested why you are not utilizing the power out on the sub to go to the tops?
Because it's rare that I actually put the subs under the tops. Normally the subs are in the center and the tops are on speaker stands
@@DJRickWeb absolutely the best way , having subs in the middle together in most situations..coupling and bass in the middle of the floor rather than a bass valley in large rooms.
Having a short power ling cable though for situations where you set up like in the video can simplify wiring and make set up even faster..
Great videos my friend.
you should do this again but with truss hang and stage
Yeah I need an assistant for that. Lol
And mask off ya I get it but no one else is around you!
Nice job! Question: do you use or recommend a sound enhancer? I though you used to incorporate it in your system? Thanks again
If your referring to processing yes a drive rack thats in the audio rack.
DJ Rick Web do you highly recommend it? Thanks ( Sonic enhancer?).
No you don't need that
Can you do a video on all your lights pls
Maybe
@@DJRickWeb ok Thank you and the prices
Is that table mobile? And from where is it?
Yes have a full video on it. And cant buy it I made it
Why are you wearing a mask when there are no one around or no crowds?......lol
Damien Cross think its part of the challenge
@@djjax2641 That's a reusable cloth mask that he will use over and over. No resources being taken from hospitals here.
Because looks cool
...he trying to sell merch?
LOL I came here to post this same thing. you dont need to wear a mask if you're at home dummy. only if you are out in public in stores and crowds. lol what a tool!
What brand is your facade?
ADJ link in description
do you still have the nlfxpro pannel for the Bunn booth if you do put it back on and add a CyberLink rackmount powerstrip to the rack part to add the power ports down there useful and so you have a patch port pannel
No gave it to Joe for his build since I switched mine around
Hi, Love the videos!! Do you have a video that shows exactly what power source I can use to connect my Pioneer DDJ 1000, 2 Speakers and my Mac in a remote Location outside? Thanks in advance 😊🙌🏽
What?
What is the best Generator or Power rig to use in a remote Location to power my Equipment?
All the power on one circuit?
In this case yes. For an actual event it would be split between two circuits if possible. The vrx subs dont like being plugged into any power strips or conditioners either. So normally they will be plugged straight into the wall
aight thas cool
I was the first one who dm'd first lol
What fascade is that in the video?
Adj event facade. Should be linked in the description
You know what I want to see? Actual Djing. I want to see a live stream and see some style. Is there any of that?
I live stream weekly man
DJ Rick Web on what?
@@DjLyRiX here on TH-cam and twitch.tv/djrickweb my last stream is uploaded on my channel
DJ Rick Web I only see gaming.
My last dj stream was on TH-cam here
Just wondering, did you have the “Mid” ports on your drive rack working full range for the monitor or was the monitor just set up for the Mid EQ?
The dbx drive rack is compatible with range systems. So sense he built the rack out it was easy to fully wire the driver rack to the patch panel in case he ever needed it
Full range. Check out the driverack video I made on how to set that up
Man i'd be worried about showing the whole complex what you have up in that garage..
I like to be dj in what I need to be a DJ. I want to start out being a DJ can I get cheap 4-star out
Can I ask you a question why do you have a mask on when no one is around you? Just asking for a friend 😆
Wanted to see how hard it is to setup with a mask so when that became real I could do it
@@DJRickWeb ahh ok I got it lol I wasn't trying to be an ass!!🙂
Nice job with your videos also!!!!👍👍👍👍👍
Hey djrickyweb can u do a tutorial on how to link more than amplifier together
You should never link two amps together.
DJ Rick Web why is that and love your videos I’m also a beginner DJ nd have u heard of Kv2 audio
Fast!
Where can I get a mask like that
ShopDJLife.com coming soon
You lost me with the mask
Lol did it for the cause lol. Made it a harder workout. But yeah was pointless. Excpet I sold that mask at the time so marketing...
Alright Webb.. Jay Book has lowest so far.. Good job!
But did he fully wire it?
Y the mask.... wow.... i can't...
It part of the challenge.
Second
Lights and Sound DONT go on the same circuit....
Why not? With led lights these days the power consumption is so low that you’re unlikely to ever trip a circuit unless you have a full concert worth of lights to run
I would never actually power a setup off only one circuit. It was just for the video
@@DJRickWeb yeah i was fairly certain you knew it , but better to state the obvious as all kinds of people watch these and someone might think its a good idea to have audio and lighting on the same circuit
@@vacneaussie575 ever heard of buzz and hum?
Thus why they should go watch my power management video that explains all the fun of electric. Lol
And why do need a mask
First