Leaking Pool Filter Air Relief Valve

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ม.ค. 2025

ความคิดเห็น • 77

  • @QU1RKONE
    @QU1RKONE ปีที่แล้ว +7

    Excellent instructional video... Thanks!!! Knowing how to properly take plastic components apart is critical. One broken plastic tab will completely alter the scope of a project.

  • @MrPuddinJones
    @MrPuddinJones ปีที่แล้ว +3

    just ordered some o rings rather than replacing the whole unit! thanks for uploading this!

  • @scottmiller3207
    @scottmiller3207 ปีที่แล้ว +3

    Excellent video. You saved me a call to my pool repair guy. Thank you so much.

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +2

      Lol that’s great, thanks for leaving the comment it’s appreciated

  • @PaulGreenman
    @PaulGreenman ปีที่แล้ว +2

    This was super helpful! I was able to get the O-rings I needed off Amazon, and then, with this video, it was just 5 minutes to get them all replaced. Thank you!

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +1

      That’s awesome, glad the video helped. Thanks for leaving the comment, always nice when small channels like ours get feedback.

  • @mattthompsonTSG
    @mattthompsonTSG ปีที่แล้ว +2

    This was an awesome, short and specific video - the marking with the tape was a bonus great idea to make it easy to put back together. Thanks!

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +1

      Thank you and I appreciate that

    • @QU1RKONE
      @QU1RKONE ปีที่แล้ว

      That was an excellent suggestion! I went a slightly different route and simply took a picture of the spout in relation to the gauge.

  • @MarkMcCluney
    @MarkMcCluney 2 ปีที่แล้ว +2

    I only know what this thing is because of your filter-changing vid but I watched all the way through because I enjoy your vids so much, no kiddin'. Cheers Harki, love to you all there.

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +1

      Thanks mark appreciate it. We are doing well here in TX, hope the same for you and yours. Cheers!

  •  2 ปีที่แล้ว +3

    Hello my friend,
    Congratulations my friend, your work is always more innovative and practical than serious. the relief valve is now complete. I always like your ideas. See you. Stay healthy and happy. Big greetings.

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +2

      Thanks as always

    •  2 ปีที่แล้ว

      @@LonghornWorkshop ❤️👏👏

  • @mrsmithsartroom4kids282
    @mrsmithsartroom4kids282 2 ปีที่แล้ว +6

    I really like how you break everything down step by step. The blue tape was a very good tip. I would be done with replaced o rings and not able to put the two parts back together. Very instructive video my friend. 😀

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +1

      Thanks you, it’s a simple fix that anyone can do and save some $$.
      I need to visit your channel and see your latest masterpiece.

  • @sumosprojects
    @sumosprojects 2 ปีที่แล้ว +4

    Great instructional Harki, some people would call a tradesman or purchase a new one when the fix is easy enough mate 👍👍👍

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +2

      Thanks mate. It was the easiest fix .

    • @MsDianeRoss
      @MsDianeRoss ปีที่แล้ว

      saved me about a $300 repair visit--thank you

  • @elmamo2000
    @elmamo2000 ปีที่แล้ว +2

    Thank you for the video! I was about to order a new valve.

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +2

      Great, hopefully just the o-rings for you too

  • @SujMenon
    @SujMenon 2 ปีที่แล้ว +4

    Harki, these o rings are always the culprit. They cost almost next to nothing, but is pretty critical in maintaining a leak free function.

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +3

      Right on man, and so easy to fix. The pool man would charge an arm and leg if someone doesn’t know how to do these simple fixes.

  • @whatthe40s
    @whatthe40s ปีที่แล้ว +1

    Fixing mine now too thanks to you! Perfect video!

  • @DonCabo-ks1ld
    @DonCabo-ks1ld ปีที่แล้ว +1

    Thank you! You saved my Saturday!

  • @rea8755
    @rea8755 2 ปีที่แล้ว +2

    Why would air be coming out when valve is closed position?
    Thank you for a great video.

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +1

      Valve is closed but the o-rungs inside the valve have worn out so air leaks. Simple solution is to replace the o-rings so the valve can do its job.
      Hope that helps

    • @rea8755
      @rea8755 2 ปีที่แล้ว +1

      @@LonghornWorkshop thank you so much!!!
      Happy New Years

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +1

      @@rea8755 not a problem have a great new years!

  • @kensaito6347
    @kensaito6347 2 ปีที่แล้ว +2

    I had the same issue and was able to fix it. Thank you.

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +1

      That’s great, appreciate you leaving a comment

  • @law67yan
    @law67yan ปีที่แล้ว +1

    When starting the pump and refilling the tank do you go in an manually set it up for a lower pump speed?

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +1

      My pump only has one speed so its either off or on. I have never seen a variable speed pool pump, however if you have one you should always start with a lower speed and then increase. Not sure if that’s what you were asking?

  • @ReydioTube
    @ReydioTube 7 หลายเดือนก่อน +1

    Thank you for your service 🖖

  • @keithbertrand8843
    @keithbertrand8843 2 ปีที่แล้ว +1

    great video and thank you. I see some sets of o rings on amazon. what are the sizes of the 3 o rings needed here?

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +1

      Thanks, I bought it from eBay. You will see in extended description of the video a section
      Materials and Supplies -
      I bought the o-rings from ebay, search "o rings 98209800, 98209803, 98209804" to find the part
      Hope that helps, it was about $8
      Course that’s only if your valve is the same as one of the numbers I gave above

  • @lisaostrowski1516
    @lisaostrowski1516 ปีที่แล้ว +2

    Thank you for this, I did replace the o rings and it is still leaking a bit. : / Any further advice?

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +1

      Is it leaking from the valve spout? If so and you replaced all the o rings then best to just replace the whole valve.
      I assume the new o rings that you put in were for your valve.

  • @mattterry30
    @mattterry30 ปีที่แล้ว +1

    Great video, solved my issue.

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +1

      Thanks much, really appreciate you leaving the comment and glad it helped.

  • @spindlesworkshop9744
    @spindlesworkshop9744 2 ปีที่แล้ว +1

    Very informative and very well explained

  • @stunningmisadventures
    @stunningmisadventures 2 ปีที่แล้ว +1

    Thanks for the informational video!!

  • @MJR-vb1zo
    @MJR-vb1zo 6 หลายเดือนก่อน +1

    How do I know that o rings to get . Or all them all the same

    • @LonghornWorkshop
      @LonghornWorkshop  6 หลายเดือนก่อน +1

      Please see the description of the video where I had the part numbers for the valve I have. If you valve is different you will need to google it.
      For my valve:
      Materials and Supplies -
      I bought the o-rings from ebay, search "o rings 98209800, 98209803, 98209804" to find the part.

  • @texas5458
    @texas5458 2 ปีที่แล้ว +1

    Where'd you get the replacement o-rings bro?...nm I see in comments below thanks!

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว

      See the extended description on this video. I bought them from eBay. If you know the part number you will see them sold on ebay

  • @sergiik.7055
    @sergiik.7055 ปีที่แล้ว

    Awesome!
    Thank you for the video!

  • @moe.8210
    @moe.8210 7 หลายเดือนก่อน +1

    What size are the o rings for it?

    • @LonghornWorkshop
      @LonghornWorkshop  7 หลายเดือนก่อน +1

      If you go see the description of the video you will see I have the part numbers to the o rings. That’s for the valve I have.

  • @ozzman530
    @ozzman530 หลายเดือนก่อน +1

    Seems like you could have replaced the damaged o-ring without pulling the valve off the filter housing.

    • @LonghornWorkshop
      @LonghornWorkshop  หลายเดือนก่อน +1

      @@ozzman530 yes I could have but better and easier to just remove the valve and replace all three o rings at the same time.

  • @richardcarrier367
    @richardcarrier367 2 ปีที่แล้ว +2

    Awesome, where's the link for the parts?

    • @LonghornWorkshop
      @LonghornWorkshop  2 ปีที่แล้ว +2

      Thanks, I bought it from eBay. You will see in extended description of the video a section
      Materials and Supplies -
      I bought the o-rings from ebay, search "o rings 98209800, 98209803, 98209804" to find the part
      Hope that helps, it was about $8

  • @a.p.a.woodmetal3412
    @a.p.a.woodmetal3412 2 ปีที่แล้ว +2

    Very nice my friend 👍 like

  • @karlagarcia1851
    @karlagarcia1851 ปีที่แล้ว +1

    Wonderful thank you so much!

  • @briandrake2682
    @briandrake2682 ปีที่แล้ว

    Big help thank you 🙌🏼

  • @DavidMitchell-v1j
    @DavidMitchell-v1j 10 หลายเดือนก่อน +1

    very helpful.

  • @mikesnoddy5523
    @mikesnoddy5523 ปีที่แล้ว +1

    Your the BOMB

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +2

      lol I hope it helped you save a few bucks

    • @mikesnoddy5523
      @mikesnoddy5523 ปีที่แล้ว +1

      @@LonghornWorkshop yes sir!!!

  • @rodneyfresh940
    @rodneyfresh940 ปีที่แล้ว +1

    Wow i broke my Valve over tighten it and it broke. Man wish I had watched this before I broke it.

    • @LonghornWorkshop
      @LonghornWorkshop  ปีที่แล้ว +1

      Yeah we all been there man, hand tighten snug is my rule nowadays

  • @mackadams5049
    @mackadams5049 10 หลายเดือนก่อน +1

    If this fixes my Leak from top of filter, I'll be back to exclaim your glory.

    • @LonghornWorkshop
      @LonghornWorkshop  10 หลายเดือนก่อน +1

      lol let’s hope so. If it’s leaking from the valve it’s either the o rings or the valve itself. Regardless it’s a cheap fix.

  • @MJR-vb1zo
    @MJR-vb1zo 6 หลายเดือนก่อน

    How do I know what o rings to get it . Or all them all the same