There's a reason why they weigh what they do , so you just guide it . You put pressure on it , not only will you burn the motor , but you will also ruin the pad where the sandpaper sticks too. And also what you want to do , is go against the grain at first , then when you have got rid of what ever , then go with the grain . And move cms at the time . And if you have day varnish try to use varnish remover first , waste of time really unless you have a beltsander 1st then an orbital
Good tips and nice to see women in DIY. But if you want to be a role model and do DIY videos, the FIRST thing you have to do is remove ALL jewelry like watch, earrings, and tie your hair back and up so it does not fall into your work using power tools. Don't try to look pretty in the workshop. In a kitchen, hair is unhygienic. In a workshop, hair is a dangerous liability. I lose respect for women with long hair waving in the wind, hovering over power tools. That is as bad as loose clothing. ONE mistake and your head is in the grinder. Ditto for any jewelry - wear no jewelry of any kind esp on your hand and wrists. Please adhere to basic safety.
I have a question I had to use adhesive to put 2 1-inch pieces of wood together for a tabletop I’m making. However I noticed one is bigger. Do you recommend sanding it down to get them to be even? I don’t have experience with tools so I’m not sure how to fix it
My sandwr is obviously an older version than every one ive seen in videos thus far it has its own built in? Pad thpe thing w holes in it thats like velvro- i have no clue how to get my paper on it!
not meantioned the fact that it wears out the pad faster, causes more vibration, and also puts unnecessary load on the motor wearing it out the contacts faster and burning through brushes
The best advice I heard ever. Thank you so much for this content. You saved me a lot of time and energy and effort. Now I know what I been doing wrong all this while. Say, what kind of vaccum cleaner do you attached to the sander? I wanna get one. I bout a karcher, but the exhaust Nozzle of the bosch random orbital sander is way smaller than that of karcher. So was really curious as to how to go about it.
This woman is actually right just let the tool do its job electric sanders are made to use with one hand I know this stuff because I own my dad’s father’s craftsman 3D sander it’s a contour sander the one she is using is a orbital sander
You just solved my biggest problem with this sander!
No one else has addressed it. ‘Problems created when pressure is applied’.
Thank you.
So happy to hear that. It is a very common issue
There's a reason why they weigh what they do , so you just guide it .
You put pressure on it , not only will you burn the motor , but you will also ruin the pad where the sandpaper sticks too.
And also what you want to do , is go against the grain at first , then when you have got rid of what ever , then go with the grain .
And move cms at the time .
And if you have day varnish try to use varnish remover first , waste of time really unless you have a beltsander 1st then an orbital
which orbit sander do you recommend? which brand and model are you using in this video? thanks
She just mentioned everything I did wrong.😂 Thank god I saw this video before actually staining my cabinets lol
yay! Another project saved!
Me too! lol! Explains the swirl marks I always have on my wood! 😂
yeah, I'm glad my backer pad broke, otherwise I wouldn't have seen this video
Great advice once again…one of my fav tools..😀
Great to hear!
Now I know why I got all those annoying swirl marks. 😢 Thanks for the tips!
Happy to help!
I like the video. Appreciate the instructions but I wish I saw her operating it. Im researching sanding tools to buy. Thanks.
Well, you’re using non-perforated disks, so have fun eating sawdust
She said that it’s a mesh disk
Good tips and nice to see women in DIY. But if you want to be a role model and do DIY videos, the FIRST thing you have to do is remove ALL jewelry like watch, earrings, and tie your hair back and up so it does not fall into your work using power tools. Don't try to look pretty in the workshop. In a kitchen, hair is unhygienic. In a workshop, hair is a dangerous liability. I lose respect for women with long hair waving in the wind, hovering over power tools. That is as bad as loose clothing. ONE mistake and your head is in the grinder. Ditto for any jewelry - wear no jewelry of any kind esp on your hand and wrists. Please adhere to basic safety.
Thank you for teaching me about the sander.
First timer looking forward to more from you.
Welcome aboard!
Maam can i use that to sand a mirror edges? And put a little water for clear smooth edges? Hope u answer my question 😊🙏
I have a question I had to use adhesive to put 2 1-inch pieces of wood together for a tabletop I’m making. However I noticed one is bigger. Do you recommend sanding it down to get them to be even? I don’t have experience with tools so I’m not sure how to fix it
oh no! Yes you can sand to smooth it out. Don't skip more than 60 grit at a time :D
Excellent advice. I have worked with a lot of "professionals" who werent aware of these things.
Absolutely correct
Guruji Bless You 🙏
My sandwr is obviously an older version than every one ive seen in videos thus far it has its own built in? Pad thpe thing w holes in it thats like velvro- i have no clue how to get my paper on it!
There are Jo holes in ur sanding disc? Dust collection may not work.
Its a sanding net. Lots of holes 😀
@@Anikasdiylife oh, nice.
Thank you 🙏🏾 for this video ❤❤
You are so welcome
Too late, I broke it!
There’s always next time
Not true
Thanks for your advice 🙂
Absolutely awesome advice I am getting a new sander soon, thanks madam ❤
not meantioned the fact that it wears out the pad faster, causes more vibration, and also puts unnecessary load on the motor wearing it out the contacts faster and burning through brushes
thank u😊
You're welcome!
Yep there's my problem 😂 always getting swirl marks
Thank you so much
You're most welcome
great tips 👍🏾
Glad you think so!
The best advice I heard ever. Thank you so much for this content. You saved me a lot of time and energy and effort.
Now I know what I been doing wrong all this while.
Say, what kind of vaccum cleaner do you attached to the sander? I wanna get one. I bout a karcher, but the exhaust Nozzle of the bosch random orbital sander is way smaller than that of karcher. So was really curious as to how to go about it.
I am glad it was helpful. For the vacuum - any shop vac will work. You will need to get an adapter for the nozzle.
@@Anikasdiylife Thank you fornthe Intel. Post more. Awaiting more from you.
This woman is actually right just let the tool do its job electric sanders are made to use with one hand I know this stuff because I own my dad’s father’s craftsman 3D sander it’s a contour sander the one she is using is a orbital sander
thanks for confirming your understanding!
Great needed advice.
So glad you liked it!
Thanks maam
Welcome!
Thank you I'm starting my project soon.
Have fun!
I wonder how heavy the sander is. I plan to buy one.
it's about 3.5 lbs
helpful
Thanks for these tips 🙌🏼
You bet!
Thank you!
Thank-You !! ⚘️
Superb explanation
Thanks a lot 😊
thanks ur info
Welcome
Hand sanding is faster than those jokes of sanders
Wow, what ground breaking advice.
You are welcome
@@Anikasdiylife 😘