ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Pentora 250 TOP SPEED TEST, DONUTS, and Review Part 2!
ฝัง
- เผยแพร่เมื่อ 19 มี.ค. 2021
- Finally ripping the 2020 Vitacci Pentora 250 through a field wide open throttle- top speed tests - mud and dirt slinging 🤙
Every video I've seen the driver is taking it easy you sir are tearing it up awesome my guy to see the potential of this atv is grand vinere
@@thorjoseph thanks man gotta put it to the rest lol
Those are decent quads besides only being a 4 speed that sucks but you can always change the drive sprockets to get a little more speed out of it
@JOEL VARGAS if you want more speed put a smaller rear sprocket if you want more torque or faster acceleration larger rear sprocket .....the quicker way to increase top end speed would be to put bigger tires on every inch you go up in tires size is equivalent to 2 teeth on the rear sproket
Better carb and exhaust and suspension and this thing pretty decent
Gotta tighten down bolts and nuts after every ride just about
@@jeremywilson8439 yah these quads do vibrate a lot more than a big brand
Really enjoyed the vid man
Thanks bro!
Hey bro, can you go ahead and make a vid on tightening the chain? And how often does it come loose, I was about to buy mine tomorrow.
Yeah I got you I’ll work on that tonight.
Video is up bro 🤙
@@tattedadvadirtslingers5437 where can I find this video?
@@andreas6081 look on my video list , oil change and chain adjustment on there
@@tattedadvadirtslingers5437 thanks bro. Btw, have you also this screw near throttle that limits the speed? If so did you remove it and was it big difference?
Mine is a monster and wants to pull wheelies even in 3rd.* It could take 2 more gears, but it's marketed for novices, and people would die on them frequently.
*The only gripe I have is the tie rods are shit, and the bushings on all tie rods and ball joints are shit.*
The stock headlight bulbs are trash, and the carb wants a lot of choke monkeying around until the engine is blistering hot, so my carb will get replaced sometime this summer.
Hi , i have the same one but I can't wheelie with it, the quad isn't powerful enough for it or I just don't have enough practice?
It needs a 2 stroke engine
I got mine and put 5 inch spacers all around made a world of difference on the ride and look. Please mod it make it go 55! Lol
5 inch spacers?? Man I gotta see this. If you have Instagram find me @tattedad! Also been chatting with the owner of the Pentora. There may be some modifications coming soon!
@@tattedadvadirtslingers5437 just followed you and subbed I'll be looking forward to keeping up with your pentora mod videos check mine out in your dm's.
What are spavcers?
I realized that this quad has the exact engine of the Honda crf230f dirt bike. It must be a clone. Do you think a carb from this bike would fit on the pentora?
Most likely . As long as it carbs are about the same size. Then just have to play around with the jetting
How does it have the same engine as the Honda CRF 230 when the CRF goes 70mph and this goes 45 mph can u explain how it doesn't make sense
I'm always very cautious when it comes to buying cheap China off-road things like this now because I bought 250cc dirt bike from a very known supplier that sells high-quality clones with good feedback and the bike only lasted 5 months before it stopped working completely. But For a China quad it seems like it has a good decent amount of power where did you purchase it ?
And is it still holding up?
Yah I would save money and by name brand
@@tattedadvadirtslingers5437
How is this quad holding up since you had it? I'm looking to get something like this just to mess around with in my backyard we have two acres of land
@@andre26261095 my buddy sold it - our general consensus is that we don’t miss it! Lol
@@tattedadvadirtslingers5437
Well I guess that answers my question I'll stay clear from that one
@@andre26261095 if you want something to rip around on in the backyard for a good price, I suggest an ssr srq250w2 I've had one for almost 4 years and it's been holding up really well with normal maintenance. It's not as good as a name brand but DEFINITELY a billion times better than any other Chinese brand.
Top speed ?
I was debating between buying this Pentora or going used .........for around the same price older Polaris predators 500s are available or just name brands with a lot more cc......what do you think?
To me the Pentora is a good bike for someone starting off that wants to see if they would be into riding without breaking the bank. If you are already comfortable riding a quad I would buy used name brand.
Ah the 500 more bang for the money
Buy a blaster they are cheap, dependable, fast, and fun machines. IMO it’s one of the best quads for $ and you can do a lot with them
Badass 🔥
Appreciate it
Bonjour c'est équivalent a un 250cc apollo sano predator ?
I just got one
Found a site selling these for 100 bucks a pop bought two of them but may not come for 6 months but I’m waiting on them
$100??? Let me know when you receive it lol
Good luck with that 😂
😂 will never come it is a scam to good to be true
Did you get them yet?
Any updates
A cool mod like a new exhaust louder
I’ll talk to my buddy and see if he wants to spend the money on it. If so I’ll do a video 🤙
@@tattedadvadirtslingers5437 ok cool
Hey man Ik I’m late but I might buy one and I was just wondering if it has a clutch
Yes it does have a clutch
Nice video bro I got the same just different name, called Viarelli.
Do you know the top speed of this?
Another question, I drive mine very rough and offroad aswell, but last time it seems that 3rd gear isn't as it used to be, I was max reving it without driving fast, all other gears is normal. You have a clue what that could be? I'd say before I would have driven way faster before I had to shift up to 4th.
People are clocking theirs at about 45 tops on flat pavement, but I fly up the ass of cars on roads no one is doing less than 40, and I'm a 200 pounder. *It could eat through 2 more gears easily, but it wants to pull wheelies even when I shift into 3rd, and people would die on them.
The choke is also a PITA that steals power unless the bike is blistering hot, so I will replace the carburetor at some point, but as I am making known, the tie rods are shit, and the bushings for those and everything with a crown nut are junk.
Stock headlight bulbs are a joke, but otherwise, it's a lot of bike for a beginner; probably too much.
@@jondeth298 i installed a sick light bar (12k lumen!!!) ON it. Crazy! The problem with the rev was the valves fixed it aswell. Also installed led xenon bulbs on it. My problem has been steering. Always pulled a bit to one side and that made me be afraid to go really fast. But now it seems i found the issues and it is the bushing to lower front right axle. Lets hope i can now fully enjoy it.
@@jondeth298 and btw 45 mph only? Mine goes way faster. Is your also 250cc? And did you remove the speed screw adjuster? Because tjat screw made alot of difference
@@andreas6081 mine had to at least be hitting 50 with how fast I flew up on cars during winter. Nobody does less than 40 on that road. My alignment is still funky after the last few days, so I still had shaking when I opened it up today. I need to replace all the bushings in general, and upgrade my tie rods. The engines are 230cc, but it's billed as a 250 by model name. It could literally eat right through 2 more gears out of the box.
If I still have shimmy after I'm happy with alignment, I'll deal with balancing the tires. Speed wise after opening up my air intake and installing a glass pack muffler for a car, I get lift punching it in 3rd. I want to put a larger sprocket on it to increase top speed, and at least limit wheelies to 1st and 2nd. I'm 200lbs and it wheelied and flipped on me. *I think it's a really bad ass machine, with a lot of imbalances that will cost about $300 to eliminate; that's cheap for what it is overall.* The choke on the carb needs fussed with until it's really hot, so it's on the list of dislikes and future modifications.
@@jondeth298 you badas bro 😄 show me a pic of yours?
Can you do a shifting video bro?? It would be much appreciated!
I’ll see what I can do
Ay brotha I think I’m seeing oil escape by the gear lever on the pentora but not sure if there a oil seal or something
@@2487Lakers should be a seal there - if it’s leaking may need to replace the seal
Do you think this is a good sport ATV and also do you think it’s fast compared to other ATV’s
It’s ok for a Chinese quad- doesn’t compare to a Honda/Yamaha/Suzuki/Kawasaki
Mines just stop running
What carb can I put in it I have the same quad
I’m ganna try a couple different carbs soon. Stay tuned
I thought it was a 5 speed?
Mine come in next week 😁😁😁
Awesome what color did you go with
Where did u buy yours?
@@tattedadvadirtslingers5437 where did you buy yours
@@vcomptj9796 my buddy bought it from powersportmax.com - in the first review video I show where I got it 👌
@@vcomptj9796 how fast u actually went?
The pentora and a few other Chinese brands is fine for a good bitta fun..... For the price and look after them...... Unless your taking it seriously and an endless amount of money buy a yam or Honda......
Just got mine and do I have to change the oil when I get it or it the factory oil fine?
I would change it after about half a tank of gas
@@tattedadvadirtslingers5437 oh ok thank you!
@@alexandermuniz737 your welcome 🤙
I just got mine yesterday...
Niiice!! What color did you go with
@@tattedadvadirtslingers5437 black
@@tattedadvadirtslingers5437 do fmf exhaust fit on it ?
@@lidtJohn I’m not sure if it would fit. I’m sure with slight modification the slip on muffler style could work.
@@lidtJohn sweet!
You should do some mods on it
That would have to be up to my buddy it’s his quad. What you guys wanna see done?
@@tattedadvadirtslingers5437 exhaust
@@tattedadvadirtslingers5437 exhaust and suspension
How do you tighten chain on it ?
I’ll make a video for ya
Mph estimation ?
42mph
Probably can go faster then 42 if he's on flat ground
How much did your friend get it for ?
Somewhere in the $1800 range
@@tattedadvadirtslingers5437 ok thanks new or used ?
@@finisher8783 brand new in the crate - go back and wAtch my first review video, you will see the website we used and the cost difference if you buy it assembled vs not assembled.
Your cat is so chunky I want it
Do you have to put gas in it when you first get it ?
Yes for sure
where can i get a better carburetor for it if you can you msg me please
We still have the factory carb on it. I’m not sure what a good replacement would be. I’ll do some research and see. I’m thinking finding a carb from a Honda or Yamaha. I just need to measure the stock carb
@@tattedadvadirtslingers5437 ok man thanks im waiting on you to let me know every where i check they say change it but no real instructions
I understand theres emissions restrictions in some places but these things sound like dogs. 250 should have more power than that even a chinese
That's Chinese for ya can't expect it to be that fast even tho tell cost as much as a name brand
I did 47 on mine but granted I weigh 120lbs
That’s awesome! I think my GPS app on the GoPro is off. I tired it with the drag bike I was racing and it only said I was doing 50 when really I did like 80 lol
Wats the top speed of one of this four wheeler
Sale it to me for bout1000
Air Cooled engine in quad bike its a joke
These days yes.. you are correct.
i give "pentora" a year before they're out of business like every other chinese leisure vehicle manufacturer lmao. junk
😂
My recon is faster
I agree