just found your channel. you are real for taking matters in your own hands to face the challenges that come with owning a project car. especially as a college student.
Yeah the SC only has two jacking points, the crossmember on the front subframe and the differential in the rear. You can also use the towing points at your own risk (I don't recommend this). The pinch weld points are for the safety stands.
well I'm dumb haha, I use a rubber mold that I put on my jackstands and jack it up from the middle and then add in the stands. Seen a lot of people do this but I also "cushion" the weld with the mold.
That last minute and a half is gold. This is why I preach about people understanding what they're doing and working with. Ain't nothing wrong with sitting down and figuring things out. I hope you get the passe ger side worked out. There is a huge lack of material for the wheel well 2nd inner screw and mounting tabs. I would say if you could attach the side skirt on the inner wheel well part. That's a good place to start to make sure it levels out and sits flush since you're missing both mounting clips. Good video abs I enjoyed the raw footage
Mikkel, I need your opinion. TINT, do I do it myself or take it to a shop? I know in video I said DIY but TINT is a pain in the butt. Might take it somewhere because this is something I can take the L on... And yes, when I finally pick a color for the sideskirts, I'll be using welding those plastic clips into the skirt so they can fit a little better.
@@Mikkelism thank god you said that, and please keep making videos. also, these cars don't have a lot of good rear diffuser options, so I'm gonna try to figure something out, even if it means hacking something up.
Ayeeee Teamwork Makes the Dream work!!! Haha Hearing your Relatives in the background. Even though I didn't understand them but hahaha. Always have something to say 😅
How much lower does your KBD skirts sits compared to the 97+? I just found out my 92 SC400 came with OE 97+ side skirts from the previous owner and not sure if I wanna swap them yet. Thanks, G. Keep up the good work! Edit: I'm local I think lol.
@@JonathanMai nice. I painted my own car and obviously fucked it up lmfao not horrible it actually looks sick for my first time . I think I wanna go the kbd route though
![[LIVE] : ONE ลุมพินี 72 วันนี้!! คู่เอก "ก้องศึก vs โจอาคิม"](http://i.ytimg.com/vi/hT1EOSsRPac/mqdefault.jpg)
just found your channel. you are real for taking matters in your own hands to face the challenges that come with owning a project car. especially as a college student.
Rivnuts are king for jobs like this
I agree, rivets or rivnuts are sooo hard to get in where the door's hinge is at.
Yeah the SC only has two jacking points, the crossmember on the front subframe and the differential in the rear. You can also use the towing points at your own risk (I don't recommend this). The pinch weld points are for the safety stands.
well I'm dumb haha, I use a rubber mold that I put on my jackstands and jack it up from the middle and then add in the stands. Seen a lot of people do this but I also "cushion" the weld with the mold.
Keep going with these SC vids! Makes me stoked to get mines soon
I gotchu, you got any ideas for videos? I have a lot but if you got something that I can add to my list, I will.
That last minute and a half is gold. This is why I preach about people understanding what they're doing and working with. Ain't nothing wrong with sitting down and figuring things out. I hope you get the passe ger side worked out. There is a huge lack of material for the wheel well 2nd inner screw and mounting tabs. I would say if you could attach the side skirt on the inner wheel well part. That's a good place to start to make sure it levels out and sits flush since you're missing both mounting clips. Good video abs I enjoyed the raw footage
Mikkel, I need your opinion. TINT, do I do it myself or take it to a shop? I know in video I said DIY but TINT is a pain in the butt.
Might take it somewhere because this is something I can take the L on...
And yes, when I finally pick a color for the sideskirts, I'll be using welding those plastic clips into the skirt so they can fit a little better.
@@JonathanMai take it to the shop, get it done and over with in a few hours by professionals, have warranty, be done with it, enjoy it.
@@Mikkelism thank god you said that, and please keep making videos.
also, these cars don't have a lot of good rear diffuser options, so I'm gonna try to figure something out, even if it means hacking something up.
I use the pinch welds to jack it up and put the stands on the 2 frame things in the middle. It’s pretty solid and never had problems.
That's crazy... cause mine are all bent :(
Ayeeee Teamwork Makes the Dream work!!!
Haha Hearing your Relatives in the background. Even though I didn't understand them but hahaha. Always have something to say 😅
That was my mom haha, they do always got something to say haha. Thanks for watching Mike!
How much lower does your KBD skirts sits compared to the 97+? I just found out my 92 SC400 came with OE 97+ side skirts from the previous owner and not sure if I wanna swap them yet. Thanks, G. Keep up the good work!
Edit: I'm local I think lol.
I'd say like .5 - 1 inch, I can grab some measurements if you'd like
Hey man about how long did the kit take to come ?
What’s the metal rivets u used
Very nice, looks clean. I have to say though, I'll cut those exhaust tips in a sec if the car was mine.
Hahaha, different strokes for different folks.
What size is your rims?
Hi Jonathan, what are your wheel sizes? I got the same color as you on mine sc4.
19x10.5 +22
KBD f’d up by not adding the clip holder on the side skirts
That would have been nice but you know, still pretty decent.
I had the same problems with my skirts, spent ages trying to make them fit
I might make a video on how to fix the warp in the middle. I have an idea.
@@JonathanMai please do bro ive tried so many things and nothing has worked
Are these the aero craft or vertex style side skirts?
These are Vertex
How much for de original skirts
I won't be shipping, only local pick up
Ok how much
@@rodolfogarridosantil4013 $200.
Whats the wheel spec
19x10.5 +22, 225/40
@@JonathanMai does it fit without fender folding?
@@rp17rionda Yes, if you watch the middle of my "2022 Goals" video, I shave the inside of my quarter panel.
@@JonathanMai10.5 fit the front?
How much was the kit total?
Around 1100!
@@JonathanMai was that with shipping as well?
@@kingjr1uzfe387 I ordered Black Friday where shipping was free I am pretty sure.
@@JonathanMai nice. I painted my own car and obviously fucked it up lmfao not horrible it actually looks sick for my first time . I think I wanna go the kbd route though
@@kingjr1uzfe387 Do it man! Tell me how it goes for you too!
Kbd fitment sucks ass, just go fiberglass tbh
Give me the money and I'll buy authentic haha
Looks good nice job sub for felllow sc300 youtubeer!
I'm gonna be watching all your JZ content soon ;)