The washer is only needed for tanks that don't have the hole for the filler neck support. The fuel tank that we currently sell has this hole. To answer your question, you can get a flat washer at any local hardware store. -Landan
@@xxsadlysoulzxx5010 The larger line (5/16") is the supply. It connects to the fuel filter inlet. The smaller line (1/4") is the return, and connects to the hardline just to side of the filter. -Landan
I ordered a old kit LRS-9002B-255 that came with a tank, fittings, 255 fuel pump combo which I no longer see on the site. When I went to install I compared the new tank with my old one and it was slightly different near the fuel pump area on the passenger side it didn't have that slight down slope to allow the lines to clear the frame like the stock one has and the one in this video.
Hey Sam, if you can, give us a call at 1-866-507-3786 or email us with the link below and a customer service representative can assist you and help decide if you received the right tank with your order. lmr.com/contact
After replacing fuel tank, did anyone else have problems with the straps? Too Short. tank looks a hair larger than original. I did a work around, but just checking.
Question I changed my gas leveler unit in January. Been working. Now I filled it this time and topped it off. You know after it clicks to make it even like 38.00 dollars for example and now it's reading inaccurate. Like I went to the pump with it the needle on the 3rd line and it took 8.625 gallons that deff. Doesn't seem rite. What could it be?
sounds like you need to get some ohm readings to see if it is getting proper readings from the sending unit. If it is good then you could have an issue with the gauges itself.
Do you guys sell fuell cell that fit where the fuel tank goes??? I hear that the 1995 Cobra R came whith one. I wanna make my Stang safer since i cruse wih my kids and a lady where i live got rear ended and the tank exploded killing her, my kids love the car, i just wanna feel better going out with the knowing that if i get rear ended my kids will be safe.
Where can i find a flat washer for the filler neck support
The washer is only needed for tanks that don't have the hole for the filler neck support. The fuel tank that we currently sell has this hole. To answer your question, you can get a flat washer at any local hardware store. -Landan
@@latemodelrestoration ahh thanks Landan you saved my life 🤙🏼
@@xxsadlysoulzxx5010 You're welcome! Glad I could help. -Landan
@latemodelrestoration Alright I need help on which fuel line goes to which that’s all I need to get the car running
@@xxsadlysoulzxx5010 The larger line (5/16") is the supply. It connects to the fuel filter inlet. The smaller line (1/4") is the return, and connects to the hardline just to side of the filter. -Landan
I ordered a old kit LRS-9002B-255 that came with a tank, fittings, 255 fuel pump combo which I no longer see on the site. When I went to install I compared the new tank with my old one and it was slightly different near the fuel pump area on the passenger side it didn't have that slight down slope to allow the lines to clear the frame like the stock one has and the one in this video.
Hey Sam, if you can, give us a call at 1-866-507-3786 or email us with the link below and a customer service representative can assist you and help decide if you received the right tank with your order. lmr.com/contact
Is this the model #LRS-9002B
After replacing fuel tank, did anyone else have problems with the straps? Too Short. tank looks a hair larger than original. I did a work around, but just checking.
just order having same problem... what did you end up doing?
Question I changed my gas leveler unit in January. Been working. Now I filled it this time and topped it off. You know after it clicks to make it even like 38.00 dollars for example and now it's reading inaccurate. Like I went to the pump with it the needle on the 3rd line and it took 8.625 gallons that deff. Doesn't seem rite. What could it be?
sounds like you need to get some ohm readings to see if it is getting proper readings from the sending unit. If it is good then you could have an issue with the gauges itself.
Why do they always show the 87-93 mustang instead of the 79-86 mustangs?
How can you tell if the baffle is gone on the tank? Will you hear it while driving?
***** We couldn't hear it while driving but we could hear it when removing the tank. The Fox Body was just too loud when running.
while making hard turns your car will die
Any one know if they sell that s type hose for the fuel pump?
Hey Col! Give us a call at 866-507-3786, let's steer you in the right direction!
Jmac you sound sick man
PHATDAN420x Jmac was sick but nothing stops him from helping fellow Mustang enthusiast!
My mechanic put a big glob on silicone on top of the sendingi unit connector. It was leaking gas. 😵
Do you guys sell fuell cell that fit where the fuel tank goes??? I hear that the 1995 Cobra R came whith one. I wanna make my Stang safer since i cruse wih my kids and a lady where i live got rear ended and the tank exploded killing her, my kids love the car, i just wanna feel better going out with the knowing that if i get rear ended my kids will be safe.
thanks!
Awesome!
***** Hope this helps fellow Mustang Enthusiast with fuel system projects.