Ring Sizer Machine Tips and Tricks for Making Coin Rings; Coin Ring Tools
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2015
- Visit my Store for coin ring tools at: www.CoinRIngUSA.com
Visit my blog for the latest in coin ring tips, tricks, and tool updates at: www.CoinRingBlog.com
In this installment of my "Coin Ring Making A-Z" video series, I share a few tips and tricks that you can employ when using your ring sizing machine for either expanding or reducing your coin rings; as well as a brief discussion on the ring sizing machine that I use.
You can visit: www.RioGrande.com and type the Part # (112066) in the "SEARCH" box to see the particular one that I use for making coin rings.
Thanks for stopping by!
- Martin
Description: "Ring Stretcher and Reducer Tips and Tricks for Making Coin Rings; Coin Ring Tools" - แนวปฏิบัติและการใช้ชีวิต
Good info. Keep them coming.
Great video 👍 lots of info
Just wanted to let you know I think your videos are great an helpful I went an picked up a arbor press an break over handle like you displayed in an earlier video once I got the handle cut an replaced an started using it I couldn't imagine doing it any other way so thanks
Cory Canfield Hey Cory, you're very welcome, and thanks for the kind words. The extra leverage with the longer breaker bar/handle does make a difference!
What's the max diameter starting hole you can have and still reduce a coin down to a woman's finger size, say size 6 ring? I've punched a 5/8" diameter hole into a Canadian large cent and can't seem to reduce it to woman's size ring? any ideas? thanks! great videos.
+Jason Weiss Hey Jason, there really isn't a set "hole size" per se, but oftentimes it's easier to start with a smaller center hole; that way, the sides of the coin will come up closer together, (more "tightly") as you're initially folding your coin, and more importantly; you won't end up with an overly wide coin ring that you have to try to over-reduce; which most oftentimes ends up badly. Let me know how that works for you!
How do you keep the ring from turning your fingers green?
can this ring sizer and the like be used in place of an one ton or half ton arbor press? it looks like to me it'll do the same thing...
+Dude...Are you sure?? Yes it can, as long as you have a quality-built Ring Sizing machine... the cheaper ones have been known to break off at the handle. The "Durston" ring sizing machine is a very good machine.
Very cool video! I have seen a few finger-ring-coin-making-videos lately. I llive in norway...where do i buy all these tools from? Ebay??
+scott kerridge Hey Scott, You can viisit my Store Page for all of the coin ring-making tools I have at: www.CoinRIngUSA.com
I ship worldwide as well. If you'd like, you can also visit my new blog site or the latest in coin ring-making tips, tricks, and tools at: www.CoinRingUSABlog.com
Let me know if you have any questions, thanks!
+CoinRingUSA Scott, please email me directly at: CoinRingUSA@aol.com and I will get you the details on what you're looking for, thx!
does it stretch non silver coins?
What diameter reduction die do you use for quarters? Can you post a link of where to buy one?
+Augusta Simmons ... I use the Stabilizer Reduction Die that i designed for the US Quarter and the US Half Dollar. You can find and purchase that reduction die here:
www.etsy.com/listing/249991831/sale-new-2550-cent-stabilizer-reduction?ref=shop_home_feat_2
--- I would also use the newest reduction die that I designed, the 0.9" x 1.0" reduction die (for many smaller coins), to finish off my Quarter. You can see and purchase that die here:
www.etsy.com/listing/261283954/new-smaller-diameter-universal-reduction?ref=listing-shop-header-3
Let me know if you have any questions about them, thanks!
CoinRingUSA
what is a cheaper alternative to the durston for a beginner? love all your videos
Hey Mark, thanks for the compliment. There are other less costly brands that can be found online; but I can't personally recommend a specific brand; as I only have a Durston. I will say that the other less expensive models have weak points near where the handle joins up with... they've been known to break under pressure. Just my 2 cents; hope that helps!
I have a 2 ton ratchet arbor press and a 6 ton HF press mainly need for the streaching.
So Martin regarding the ring stretchers. I'm in position for probably going for the cheaper overseas stretcher. I have the 1 ton harbor press to do reduction. The question is; Is most of the stress on the ring stretcher arm from ring reduction as opposed to stretching? So do you think the ring stretcher arm will do better with me doing the reduction on the Harbor press. Seems that you are saying in the video that reducing the larger coins put the most stress on the arm. Thanks.
Mark Daniel Hi Mark, yes; in my opinion; that is the point at which the most amount of stress will occur: while attempting to reduce on the ring stretcher. The thing to remember is all of the ring sizing machines available out there were never intended to reduce large coins to begin with! ;-)
There's northing wrong with buying a less expensive ring sizer; I just strongly recommend using at least a 1/2 ton arbor press (or greater), for the REDUCTION aspect of coin ring making; that way, you eliminate the stress that that would have put on your particular ring sizer. Hope that helps!
CoinRingUSA Thanks much Martin. Picked up the 1-ton Harbor press for $39, good investment as it is a simple piece of machinery and works well. Will be ordering one of the less expensive ring stretchers to go with it. Thanks again for your advice and keep up the good work with the videos, very informative.
Mark Daniel Thank you Mark, I appreciate it!
+CoinRingUSA I just picked up a Harbor Freight 3 ton press. I'm new to the hobby but I think it will be more than I need. Thanks for all the help.
Michael, you're welcome!