Watching some of those groups..... I'd recommend to trash that barrel. Or at minimum, spend the time with a very tight jag, JB bore paste and or 0000 steel wool polishing down those high spots... from expirence, you'll have better chances for accuracy and save time/money swaping that barrel
Eagle Eye, things are improving. I want to complete the ammo testing before I do much in the way of doing anything to the barrel. I did send a bore scope down the barrel and the barreling right when the barreling started didn’t look so good. After your comment and as groups have improved I again sent the bore scope down the barrel and things are looking better. I encourage you to take the rest of the ride with me and lets see how the CZ shoots in the next few weeks.
So I watched very carefully at the shooting when matched with Chrono. All of the high shots were associated with higher velocity. Same as the low shots with the lower velocity. The pistol match was very accurate according to velocity. The only group that didn’t match was the last one shot. The ten round of SK rifle. From what I could tell your two groups you talk about are just two groups of similar velocities. Is there a way to sort .22 ammo?
Casey, thanks for your comment. I did the same after the video came out I watched it and found I was wrong but I was happy to see the velocity was to some extent related to the large groups. I have done some sorting videos and I sort my weight for competitions. I will be expanding on ammo sorting in upcoming videos, please stay tuned.
Have you tried the lapua center x yet ? Also I was wondering if when you mentioned barrel width did you mean barrel length ? I have an At one with a 16” barrel and am considering getting a longer barrel . Thanks
I have believe I said width not length, sometimes I amaze myself. I shot Center X and Midas + yesterday video will hopefully be put by the end of next weekend,
AT-One is my preferred choice. If you can get the 24” Bernal, I like the adjustability of the stock and laminate stock. With that said, I the MTR is comfortable for me.
@@AimSmallMissSmall_TV Thanks for the reply! I have to run mine a little higher. They all seem to have their subtleties where that is concerned! Have a good day my friend!
I've personally never seen a factory threaded 20.5" MTR barrel in the US, and I've seen a lot of them. Maybe they're relatively new and I just haven't seen one
![[Don't Try This] Pushing the 308 Win to 300 Win Mag (Bat Machine, Alpha Munitions)](http://i.ytimg.com/vi/uXkmcpk7Brc/mqdefault.jpg)
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 67 [ซับไทย]](http://i.ytimg.com/vi/he_uIQ-Xv_Q/mqdefault.jpg)
Watching some of those groups..... I'd recommend to trash that barrel. Or at minimum, spend the time with a very tight jag, JB bore paste and or 0000 steel wool polishing down those high spots... from expirence, you'll have better chances for accuracy and save time/money swaping that barrel
Eagle Eye, things are improving. I want to complete the ammo testing before I do much in the way of doing anything to the barrel. I did send a bore scope down the barrel and the barreling right when the barreling started didn’t look so good. After your comment and as groups have improved I again sent the bore scope down the barrel and things are looking better. I encourage you to take the rest of the ride with me and lets see how the CZ shoots in the next few weeks.
Nice shooting , good info. Thx
your welcome and I'll take that is a big compliment looking at your user name.
Thanks for doing what you do. I'm learning every day.
Excellent and thank you.
So I watched very carefully at the shooting when matched with Chrono. All of the high shots were associated with higher velocity. Same as the low shots with the lower velocity. The pistol match was very accurate according to velocity. The only group that didn’t match was the last one shot. The ten round of SK rifle. From what I could tell your two groups you talk about are just two groups of similar velocities. Is there a way to sort .22 ammo?
Casey, thanks for your comment. I did the same after the video came out I watched it and found I was wrong but I was happy to see the velocity was to some extent related to the large groups. I have done some sorting videos and I sort my weight for competitions. I will be expanding on ammo sorting in upcoming videos, please stay tuned.
Have you tried the lapua center x yet ? Also I was wondering if when you mentioned barrel width did you mean barrel length ? I have an At one with a 16” barrel and am considering getting a longer barrel .
Thanks
I have believe I said width not length, sometimes I amaze myself. I shot Center X and Midas + yesterday video will hopefully be put by the end of next weekend,
That pistol match is very inconsistent there is no way to get a good group out of this ammo thanks for the insight watch all your videos.
Beagleman
Thanks for the comment, it is key to find consistent shooting ammo for sure.
Hi. How would you rate your MTR vs your At One? Sorry if you answered this already
AT-One is my preferred choice. If you can get the 24” Bernal, I like the adjustability of the stock and laminate stock. With that said, I the MTR is comfortable for me.
I dont think I would use that cutting board. I think its affecting your shooting .
Hum, so far for me seems to be the best option. Mostly because I am navigating the ARA target.
I'm curious about what your action screw torque setting were?
I can not confirm for this video but I have my CZ set to 2.6nm or 23 in./lbs. I have a play list covering action screws
@@AimSmallMissSmall_TV Thanks for the reply! I have to run mine a little higher. They all seem to have their subtleties where that is concerned! Have a good day my friend!
What barrel do you have on the MTR stock ... This is because it seems to me a little longer than my MTR which is 20.5 with a screw barrel end.
This is the stock barrel, 20.5” I believe. I think my rifle must be a 2022 version and they much not be threading the barrel.
I've personally never seen a factory threaded 20.5" MTR barrel in the US, and I've seen a lot of them.
Maybe they're relatively new and I just haven't seen one