DJI FPV Wiring Guide - How to connect to Betaflight

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 340

  • @drib2896
    @drib2896  5 ปีที่แล้ว +17

    IMPORTANT NOTE: After more long-term testing, I do NOT recommend this flight controller for use with the DJI system because the 9V regulator is not a sufficient power source. While it worked for me on this one board (which is why I used it for this video) many others have reported the DJI system cutting out due to insufficient power. I recommend using the Hobbywing flight controller. The connections shown in this video still apply, just use a FC with a more reliable power supply.

    • @bohan9957
      @bohan9957 4 ปีที่แล้ว +1

      Does this apply to the V2 JB F4 board? I thought they improved the robustness of the 9V regulator in the V2.

    • @dreden2000
      @dreden2000 4 ปีที่แล้ว +1

      @@bohan9957 you can wire it to the VCC on JBV2. This comment is super late but I see nobody has answered you hahaha

    • @bohan9957
      @bohan9957 4 ปีที่แล้ว +1

      @@dreden2000 Hey thanks man I appreciate the response. I ended up going with a different route and got the NewBeeDrone Infinity 305 stack. I've also unscribed to his channel because he never reply to anyone.

    • @dreden2000
      @dreden2000 4 ปีที่แล้ว +1

      @@bohan9957 haha bro you cant expect large creators to reply all the time :/

    • @lolonator-bedwars451
      @lolonator-bedwars451 3 ปีที่แล้ว

      Is it possible to connect a different goggle to the air unit

  • @williamkimball3782
    @williamkimball3782 5 ปีที่แล้ว +28

    DRIB, Love the video and I appreciate the stoke for this product. I am completely disappointed by all the hate for DJI HD system from our fellow FPVers. This is absolutely huge for the hobby regardless who is making the product. I have been waiting for HD since day ONE, and its finally here :0) Thanks again BRO !!!

    • @charmande80
      @charmande80 5 ปีที่แล้ว +6

      Concur. There's a lot of misinformation about the system too in which I often refer them to this video about how you CAN use this with your own transmitter. People want to hate it because it's DJI but honestly healthy competition just breeds better products all around. System is by no means perfect but glad to see progression and then further competition.

    • @markgiles8527
      @markgiles8527 5 ปีที่แล้ว

      I just can't understand why DJI releases products like this without an OSD. They did it with the ocusync and they've done it again here. I like to fly with a camera drone and I'd like an OSD. Do that and I might get it. Until then I'll keep using the awesome ezwifibroadcast system that costs a hell of a lot less and it ticks all the boxes for me. 😀

  • @michaelclark5757
    @michaelclark5757 5 ปีที่แล้ว +5

    You are the man for pumping this out so quickly! I’m already sold 100% but you’re excitement is singlehandedly going to blow sales up!

  • @jessefpv4949
    @jessefpv4949 ปีที่แล้ว

    I can see why you have more views, I'm thinking of switching to dji after 3 years of analog of starting fpv ..Only thing is price... time to bite the bullet. And this one video was helpful to understand. for newer folks like me switching from one to the other appreciate to all the video I've seen. And yours thanks brotha.

  • @alanaerial4459
    @alanaerial4459 4 ปีที่แล้ว

    Everytime i search for detailed video about an FPV product, Le Drib did a very good video on it ! Thanks a lot !!! Greeting from Switzerland

  • @orionmec
    @orionmec 2 ปีที่แล้ว

    I so wish I would have seen this video at the beginning of my journey! Would have saved me a whole heap of frustration trying to get the answer!

  • @fcass
    @fcass 5 ปีที่แล้ว

    How did I miss the drib 2 channel until now? No complaints more dribbling is great. ;)

    • @fcass
      @fcass 5 ปีที่แล้ว

      And well done, this answers all the questions others left me wondering.

  • @heartofamericafpv5584
    @heartofamericafpv5584 5 ปีที่แล้ว +1

    best DJI FPV video yet. good work.

  • @KreezeTV
    @KreezeTV 5 ปีที่แล้ว

    Thanks Drew. I'd been waiting for FatShark to come out with a new flagship so I could get an upgrade from my Aomways. When I saw this release yesterday I knew it was what I wanted. It'll be here on Tuesday and with the help of your video I'll be all set!

  • @RigelVlog
    @RigelVlog 4 ปีที่แล้ว

    Great video and information, I'm having problems with a pre-build TiTAN C5 that I bought, I can't see my dji remote controller in betaflight, I don't know what ports is it, any idea to find the right ports? thanks!

  • @Hotwire_RCTrix
    @Hotwire_RCTrix 3 ปีที่แล้ว +1

    Awesome, concise and structured. 😁👍

  • @djdubz
    @djdubz 5 ปีที่แล้ว +4

    love this idea. just saw fatshark has some HD coming too... Can't wait for your review of that system (FS Byte Frost)!

    • @calabrese221
      @calabrese221 5 ปีที่แล้ว +1

      Seriously do they? I've been hoping they would. where can I find the info on that? Not crazy about DJI wanting all our info just to turn on the goggles.

    • @djdubz
      @djdubz 5 ปีที่แล้ว +1

      @@calabrese221 looks like it's a groundstation and they are working with hd-zero, but it appears it would allow you to use your own HDO's and TX. You'd have to buy the groudstation and their camera unit. I'm only going off the things I have seen, but they say they should have them in reviewers hands in a couple weeks, so I will stay tuned for now. DJI has set the bar high though with their package, but I will wait to see what FS has in store for us, before buying....

    • @djdubz
      @djdubz 5 ปีที่แล้ว

      @@calabrese221 facebook.com/FatSharkRC/photos/straight-outta-chinaready-for-a-sneak-peak-of-byte-frost-fat-sharks-soon-to-be-r/2189117317882016/

    • @dv2045
      @dv2045 5 ปีที่แล้ว

      @@djdubz hello. I have no idea about FPV drones (just flown mavic pro). A couple questions: In your experience, 1) should I get the dji digital or wait for other systems?, 2) can you pair a mobile phone to dji goggles so another person sees what I see?, 3) would you recommend the dji transmitter/controller or get another brand? thank you!

  • @flywithafatguy5825
    @flywithafatguy5825 5 ปีที่แล้ว +1

    This is exactly the video I've been looking for

  • @Creation-mv2mv
    @Creation-mv2mv 3 ปีที่แล้ว

    thanks bro, you helped me alot, but can you tell that what is the minimum and max voltage to be given

  • @axelbaudendistel2136
    @axelbaudendistel2136 ปีที่แล้ว

    Hi Drib, thanks for all the tips and the really good broken down explanations! I fly a DJI FPV (with Integra Google). Yet, I still have an >> Align MR25

  • @janhamalainen513
    @janhamalainen513 4 ปีที่แล้ว

    Thank you for your video! It helped me a lot in troubleshooting. I connected serial cable tx and rx wires so no osd at all. But thanks to you i found the problem!

  • @patsjoholm
    @patsjoholm 5 ปีที่แล้ว

    Getting BF OSD would be important to me. Glad to hear they have that coming soon.

  • @Jacksquatch69
    @Jacksquatch69 5 ปีที่แล้ว

    The the 9V Regulated pad on that Bardwell board isn't enough. My Air unit was turning off and rebooting after hard flips/rolls. I wired mine direct to ESC +/- pads (vbatt) ( I'm on 4s ) and now it works fine.

  • @julianicaballero
    @julianicaballero 5 ปีที่แล้ว +7

    Hey can you do a Built Video with the DJI FPV System on the Skyeliner Frame

  • @dronedadfpv4541
    @dronedadfpv4541 4 ปีที่แล้ว

    Plug in module for taranis to use dji RX? They are both sbus so how different could they be? I love my dji fpv but I’m not ready to let go of my Taranis. I still like the “One radio to rule them all” idea!

  • @Rcade365
    @Rcade365 5 ปีที่แล้ว +1

    this video will help a lot of people im super glad you did one Rock On!

  • @richardgunter9944
    @richardgunter9944 5 ปีที่แล้ว +3

    I'm still having a problem trying to get battery voltage from the bird to display in the DJI goggles .. I've download BETAFlight 10.6.0 and I'm running 4.1.0 firmware on the bird.. there's still no DJI_HDL_7MS protocol listed in the RX dropdown menu and from my understanding you have to have that before it will work.

    • @ALNDAddiction
      @ALNDAddiction 5 ปีที่แล้ว +1

      Same here, but my OSD works, my sbus doesn't work

    • @camji9370
      @camji9370 5 ปีที่แล้ว +1

      Same with Matek CTR F405, maybe all chipsets/manufacturers are not ready atm.

  • @AngryPepper1964
    @AngryPepper1964 3 ปีที่แล้ว

    Thanks drib, this is exactly the info. I was looking for.

  • @AvinduJayakody
    @AvinduJayakody 5 ปีที่แล้ว

    Is this working on betaflight F4 Pro V3 Flight Controller Board ?

  • @richardgunter9944
    @richardgunter9944 5 ปีที่แล้ว +1

    I'm still unable to get osd v-bat from the bird in the goggles .. only goggles battery voltage

  • @kumardeepam
    @kumardeepam 3 ปีที่แล้ว

    My white and grey cables were connected incorrectly. This helped soldier it properly. Thank you.

  • @dkieng
    @dkieng 5 ปีที่แล้ว +1

    Can you make another video on how to set up the switches like the Flight mode, Angle, Horizon, on the DJI RC controller? Thanks,

    • @drib2896
      @drib2896  5 ปีที่แล้ว

      You set it up in Betaflight just like any other radio

  • @invertedproductions7577
    @invertedproductions7577 5 ปีที่แล้ว +2

    While they are getting osd sorted let them know it needs to be compatible with inav as well, need to use it in a wing

    • @hansturpyn5455
      @hansturpyn5455 5 ปีที่แล้ว

      its not realy a system for longer range as it is a bidirectional transceiver link. for long range you need a oneway link like "fpv blue"

  • @bulidingforever4109
    @bulidingforever4109 5 ปีที่แล้ว

    Did the RTF HD1 unit you guys sell in the store is with Bipper installed ?

  • @lubieplacki3
    @lubieplacki3 5 ปีที่แล้ว

    Hi, I have problem with OSD -> Battery Voltage from drone does not appear on the screen. I try 4 different FC: Kakute F4, F7AIO, Omnibus, and T-Motor F4. Grey wire to RX, white to TX and MSP. All doesnt want work. Please! Halp me to fix that. What I do wrong?

  • @attackemartin
    @attackemartin 5 ปีที่แล้ว

    does anyone knows the state of development regarding the OSD Betaflight functionalities?

  • @TheCiardellas
    @TheCiardellas 5 ปีที่แล้ว +1

    Trying to make this work with the hardware from my diatone 369
    It has a F7 board
    I did everything like you said in the video and it still won’t work..

  • @estudioaguilamagnetica3174
    @estudioaguilamagnetica3174 2 ปีที่แล้ว

    Hello! Do you know how to activate the live sound on the dji air unit, with the v2 goggles? I connect my headphones but I have no audio...
    Thanks for your video. Greetings!!

  • @melbournesubtropicfruits9474
    @melbournesubtropicfruits9474 3 ปีที่แล้ว

    Your OSD is still quite minimal? What is the arrow pointer on bottom right? Is that associated with Home GPS Location?

  • @andrejszukovs1564
    @andrejszukovs1564 4 ปีที่แล้ว

    Hi.I connect DJI AU to Flight controler,but on betaflight dont show signal from remote to AU. Why? I try to do all correct.DJI googles found signal from FC,but AU and remote dont want connecting.

  • @JamesSmith-sj7ub
    @JamesSmith-sj7ub ปีที่แล้ว

    Can you build step-by-step from start to finish fpv rc car with dji headsets with remote and when u turn ur head the camera moves left right and up and down please

  • @joshmcdonell105
    @joshmcdonell105 5 ปีที่แล้ว +1

    Skyeliner V2 going to accommodate this?...asking for myself.

  • @GavDoG7
    @GavDoG7 5 ปีที่แล้ว +1

    Thanks for posting! This answered so many of my questions

  • @EdRickerVlogs
    @EdRickerVlogs 5 ปีที่แล้ว

    Hi Drew, Got a problem if you have a moment. I have the Riot Control F4 and just wired up the FPV Air Unit. I'm finding that the Riot Control 9V BEC is not providing adequate power to the Air Unit...it continuously powers on and off and won't output a video signal. I can successfully power the Air Unit directly from VBAT on 4s, but unfortunately my build is set up to fly best at 6s which will fry the Air Unit.
    I'm assuming the JB board you show in your video has a more robust 9V (maybe more amperage or watts?). I may have to upgrade, but I was bummed the 9V pad on the Riot Control isn't cutting it. Any other ideas or workarounds, or is the JB board FTW?
    Thanks in advance.

    • @drib2896
      @drib2896  5 ปีที่แล้ว +1

      Yes the 9V reg on our board is not sufficient. I also do not recommend the JB board. I started having issues with that regulator too.
      The board that has proven to have the most reliable power supply, is the hobby wing FC. It has a two amp 12 V regulator that does an excellent job of reliably powering the DJI air unit.

    • @EdRickerVlogs
      @EdRickerVlogs 5 ปีที่แล้ว

      @@drib2896 Thanks for the reply. I had a CLRacing F4s lying around, and its 9v 2a pad ended up working great for the Air Unit. Had a great flight session with it today.

  • @jtb-fpv6699
    @jtb-fpv6699 5 ปีที่แล้ว +3

    Looks good but needs a module version so people can use existing goggles. Price eliminates most hobiests.

  • @hateforall4012
    @hateforall4012 3 ปีที่แล้ว

    where do I find the connecter and cable so i can connect my flight controller to my computer?

  • @ehsank-mn2db
    @ehsank-mn2db 4 ปีที่แล้ว

    Hi , Thanks for the video . Is it possible to see the video footage of the air unit in tablet ? for example for the second person ? all videos that are on TH-cam is about using it with the DJI Goggles only
    ! :-(

  • @ludal79
    @ludal79 5 ปีที่แล้ว

    Hey mate, great video. I am trying to connect the air unit in an RC plane (3S LIPO). Should I connect directly the power wires to the lipo pack? The BEC of my ESC in only 5V...

  • @trevob123
    @trevob123 2 ปีที่แล้ว

    Do I need that little board or can I just give the + & - power and stream it to my dji goggles?

  • @LarscoFPV
    @LarscoFPV 5 ปีที่แล้ว +2

    I’m having an issue with my FPV system.
    1) I can’t switch my power from 25mw to 700mw
    2) my aircraft voltage and flight time do not show
    3) I only have channel 1-3 and 8.

    • @sl1dertheone
      @sl1dertheone 5 ปีที่แล้ว +1

      Im having a similar problem............

    • @LarscoFPV
      @LarscoFPV 5 ปีที่แล้ว

      I believe 1 and 3 have to do with the system not thinking I’m in the United States. Other regions only allow 25mw and limited channels. Just don’t know how and where to change.

    • @jackbisson9226
      @jackbisson9226 5 ปีที่แล้ว

      Try this out it may do the trick. He talks about how to change it via a file on the micro SD card. th-cam.com/video/u0e0mB6EEyY/w-d-xo.html

    • @ALNDAddiction
      @ALNDAddiction 5 ปีที่แล้ว

      You have to unlock FCC mode with your micro SD.. there is a tutorial on YT :)

    • @emilecaillou
      @emilecaillou 5 ปีที่แล้ว

      I had range problem and i thank that it was the mode 25mw. I switched into 700mw and i still have issues.
      How is your dji range guys ? Inm less than 600m in an open field... so disappointed

  • @ktrails
    @ktrails 4 ปีที่แล้ว

    So, if you only wire the red and black for power, you said you can get your HD-Dog to your goggles. Is it also recording to on-board recorder on the Air Unit? Or do you only get the video to the goggles and then record it there? Thx

  • @martin19117
    @martin19117 3 ปีที่แล้ว

    Hi. I got a question. Can you use the Dji remote control for multiple quads that have the Dji air units installed. For example. I have quad 1 and 2. Can I use either quad 1 with the same remote control and then half hour later switch over to quad 2 with the same remote control? Like a Taranis x9D remote where I can change the model (quad) on the remote control.

  • @emilianozapatta5978
    @emilianozapatta5978 5 ปีที่แล้ว

    this DJI SYSTEM came out one year ago. The RE Black Goggles ! They have BOTH digital and analog built in ! Yes the goggles are huge. BUT the image quality is absolutely astounding. The "air unit" is twice this size. wiring and hookup is identical. use the "buddy trainer port" to get the Occusinc Range ! the goggles are excellent to connect to HDMI on the computer to watch Netflix youtube m etc … I have owned DJI for years and still fly Mavic Pro all the time. They have an excellent service center system. Will this system have a return to home (not just Betaflight RTH) ?

    • @jdogflipper7997
      @jdogflipper7997 5 ปีที่แล้ว

      Emiliano Zapatta the RE black goggles were good but not good at all for fpv and drone racing because it wasn’t low latency, this new version is a lot better

  • @cubblerfilm8947
    @cubblerfilm8947 4 ปีที่แล้ว

    Do I have to use dji goggles if I am using dji fpv unit? They’re quite expensive

  • @entertainmentunlimited3256
    @entertainmentunlimited3256 4 ปีที่แล้ว

    is it possible to replace the camera of any drone with dji fpv camera without module? if yes than how?

  • @nide85
    @nide85 ปีที่แล้ว

    Can I Connect the Signal ground (Brown) and Power ground (Black) to the same Groung on FC?

  • @emilpers1078
    @emilpers1078 5 ปีที่แล้ว +1

    Can i use the Air unit to my HDO goggles with Rapidfire?

  • @miaoumiouRC
    @miaoumiouRC 5 ปีที่แล้ว

    Hello Drib 2 great video! Well supplied, I am currently on a car project RC 1/5 scale I have to mount the air unit of DJI on a car for FPV racing on car 1/5. Can you tell me if I need a flight controller to connect to the DJI air unit knowing that I am using a remote controlled car remote control. I hope my question is understandable in order to get an answer from you.

  • @mooosestang
    @mooosestang 5 ปีที่แล้ว

    I hope they are going to include a connector with some decent silicone wire for the production models. That looks like the cheapest plastic coated wire you can buy. I noticed that in the closeups on the rotor riot video. The wire insulation looked like it melted.😪

  • @Stephanbrown1987
    @Stephanbrown1987 3 ปีที่แล้ว

    Can this system be used with fixed wing flight, or autonomous fixed wing flight?

  • @BigAlFPV17
    @BigAlFPV17 5 ปีที่แล้ว +2

    Excellent tutorial Drew!!

  • @jonyvilla23
    @jonyvilla23 5 ปีที่แล้ว

    Do you think you have problems not using a BEC?

  • @MikeMcCarty6453
    @MikeMcCarty6453 4 ปีที่แล้ว

    Just wondering if the air unit antennas are supposed to be loose fitting?

  • @wilderg88able
    @wilderg88able 5 ปีที่แล้ว +3

    Thanks drew! Finally someone explained in detail more about installing. How does the dji system work when flying alongside analog? Any interference either way? Id hate to fly with my friends and mess up their feed.

  • @lfrecords3970
    @lfrecords3970 5 ปีที่แล้ว

    i was hoping that this "air unit" was FC too...so would need only an esc and reciever if you dont get the radio...but its just like a VTX right? and a reciever in case you get that dji radio......so again you need FC+ESC+reciever.....so if you get only the googles..for any drone..you need to pay like 150-160 for a vtx+camera ...? right? i was ready to go order the googles this week with 2 units without the radio cause i already have like 4 radios..2 futabas for my helis and 2 frsky till now ...i wanna go for top googles now and since i usualy fly alone without any other people arround me i was thinking for the dji now.....instead of fatshark or maybe the skyzone 03O....but now i m thinking ..that 150+ for every camera only..? i dont know...thats my only concern now...! :/

  • @imager09tube
    @imager09tube 3 ปีที่แล้ว

    Do you connect signal ground anywhere where is available? or any ground on the FC?

  • @BobbyBezonka37
    @BobbyBezonka37 4 ปีที่แล้ว

    Can you use 6s with DJI, and Hobbywing Stack?

  • @chinofpv9441
    @chinofpv9441 5 ปีที่แล้ว +2

    Thanks for the great tutorial, got everything set up super quickly! I have flashed Betaflight 4.1 on my FC and I'm running the 10.6.0 configurator, yet I don't see the DJI_HDL_7MS option, any idea why?

  • @kimob4
    @kimob4 4 ปีที่แล้ว

    HELP!
    I have the DJI recommended setup (FSSA PROII and FC) with the DJI DIGITAL FPV setup including the controller. I have everything registered and connected but I do not know how to get the controller to communicate with DJI's FC through Betaflight. I flashed with TMOTORF4 4.1.1 but since there is no soddering between the DJI housing and the TMOTOR FC I do not know how to configure the UARTs. I tried what you said on this video but it didn't work, i assume because it's not the same ESC and FC. PLEASE HELP!!

  • @fortunatofoto
    @fortunatofoto 5 ปีที่แล้ว +1

    Hello guys. how do you enable the dji hdl protocol from betaflight? I can't use betaflight version 10.6 and firmware 4.1 on fc.ma nothing appears

    • @richardgunter9944
      @richardgunter9944 5 ปีที่แล้ว

      I'm having the same problem Fortunato trying to get battery power from the bird to show up in my DJI goggles .. Can't get the HDL protocol and I even tried the unofficial 10.6.0 and 4.1 that are listed in the unstable versions of betaflight for my FC and I'm using the same FC as Drew is in this video ..

  • @EverythingFixed732
    @EverythingFixed732 4 ปีที่แล้ว

    for the tx pad and rx pad i dont have them on my iflight f7 board is there another synonym

  • @AhmadFPV
    @AhmadFPV 2 ปีที่แล้ว

    Hello, hope your doing well.
    I have a caddx + dji controller + cinerace20 HD.
    I have trouble with binding. First it was ok then after installing the propellers lost connection on both goggles v2 and controller.
    Tried to bind again, nothing
    Refreshed goggles and caddx still nothing
    Goggles v2 on fpv system already
    Caddex on - solid green light - binding mode solid red (nothing after that)
    I need your help please

  • @uyegidgg
    @uyegidgg 5 ปีที่แล้ว

    How do you wire it if your Flight Controller only has a 5V pad?

  • @sentosa_K
    @sentosa_K 3 ปีที่แล้ว

    hi, just wondering can we use the radio dji remote controller if we used airplane fixed wing rc? also do you recommend the matek f405 wing or f722 wpx for the flight controller? thanks!

  • @fluidartyoo8331
    @fluidartyoo8331 4 ปีที่แล้ว

    Goood!!! I wonder that is it possible to use revolt osd with dji air unit and crossfire system? I think it is overlapped with rx3. How can I use both of them?

  • @srqcrna
    @srqcrna 5 ปีที่แล้ว

    Actually, I think I figured it out by watching your videos and other in the business. But I am still left with one question. The power for the FPV air unit says 7 to 17 volts, but my T-motor F4 FC only has 5 volt pins. I do see a part on the T motor F4 FC where I can jump two points to get battery power (5 to 36 volts), I assume it only gives what a 4s battery offers (14.8 volts). Does this sound correct? Again, many thanks. Next time I am in Orlando, I will definitely stop by your store!

  • @jakemaughan3818
    @jakemaughan3818 4 ปีที่แล้ว

    If we want to fly with digital is it worth it just to get the controller? Or is having a separate crossfire worth the "dead weight"?

  • @srqcrna
    @srqcrna 5 ปีที่แล้ว

    Thank you so much for making this video. I am thinking about purchasing the DJI FPV and I already have the T motor F4 and F55A Pro II. Is there any way you can show me where to connect the DJI wires to the T motor F4 FC? Thank you so much, love your store.

  • @enrico320i
    @enrico320i 5 ปีที่แล้ว

    If using a Taranis with crossfire, is there a way to get in the Dji Menü and the hole stuff? If not that's the biggest reason to get the controller too? Would be great to have a video with use of Taranis what most users have and the limit of functionality with it!

  • @3ufalo
    @3ufalo 4 ปีที่แล้ว

    can you help me ... i use a f405mk2 can i connect this unit? if i have a receiver do i have to solder the sbus of the air unit?

  • @kaelfors
    @kaelfors 4 ปีที่แล้ว

    Hi, I'm really new to this. Is it possible to connect DJI Air fpv unit to Inspire 2? Just to see where I'm going when my camera man concentrates on his part with the Zenmuse gimble. Cheers /AK

  • @TheCiardellas
    @TheCiardellas 5 ปีที่แล้ว

    Also that option you mentioned djihdi something or other in settings is now called “sbus baud fast”

  • @Cinoo90
    @Cinoo90 2 ปีที่แล้ว

    All bidned dji fpv caddx Vista nazgul Evoque goggles ... Don't have any control from my reciver don't know why.... betaflight my controller is not showing anything any ideas?

  • @FilipRadelic
    @FilipRadelic 5 ปีที่แล้ว

    I was concerned that telemetry and therefore OSD would only work if you used their RX, this is a pretty big deal and a good enough excuse for me not to wait for the "FatShark" option. I am surprised this isn't made more obvious from their marketing/faq/manuals/whatever - didn't see that this was an option anywhere! Thanks for the detailed explanation Drew ❤️

    • @FilipRadelic
      @FilipRadelic 5 ปีที่แล้ว

      Now if only DJI would add the stock to their EU store...

  • @scole901
    @scole901 4 ปีที่แล้ว

    I would like to install this on my vortex 285, what do you think

  • @thebeardfpv162
    @thebeardfpv162 5 ปีที่แล้ว

    Very nice overview. Enjoyed this.

  • @checkeredflagfilms
    @checkeredflagfilms 5 ปีที่แล้ว

    Hey Drew, how best to increase the push/pull tension on the sticks? What methods have you implemented? thanks

  • @aruhtaz
    @aruhtaz 5 ปีที่แล้ว

    @Drib 2 This might be a stupid question but I was wondering...Red - 5V, Black - GND, White - RX1, Gray - TX1, Brown - Any GND, Yellow - SBUS, would these connections be correct? Trying to wire a Omnibus F4 FC board (not too sure which version... it was just laying around) with the DJI Air unit

  • @havoc_64
    @havoc_64 5 ปีที่แล้ว

    Lots of questions!! So I am not using a Long Range receiver mod like the TBS or R9. Would you recommend going this route with the DJI? I have a Session and GP 7 that I currently use for recording, but it appears that the DJI setup would preclude the requirement of me mounting a go pro?
    Do you think there's room for the DJI air module in the Reverb or Armattan Frame? Where do you mount the Air Unit on your dropped Deck frames?

  • @probante
    @probante 4 ปีที่แล้ว

    can someone tell if these googles support LAT/LONG and ALTITUDE if correctly set via a FC and a GPS?

  • @rovinspeksi7930
    @rovinspeksi7930 5 ปีที่แล้ว

    Hi, Is there any possibility to have another FPV Screen for the audience ? Thank you

  • @TheCiardellas
    @TheCiardellas 5 ปีที่แล้ว

    Thank you!
    This video actually helped
    Just needed to switch to sbus in betaflight to use the dji radio

  • @DogflyFilm
    @DogflyFilm 8 หลายเดือนก่อน

    Can goggles v2 match dji remote 2?

  • @manuelfalcon334
    @manuelfalcon334 5 ปีที่แล้ว

    Can you guys do a video of a DJI set up using your own receiver please please please

  • @waynemorgan756
    @waynemorgan756 5 ปีที่แล้ว

    Hi
    how did you get that option in the receiver section HDL 7ms
    many thanks

  • @prrcpor
    @prrcpor 5 ปีที่แล้ว

    That's wild man. I gotta get that. I do range tests on all my radios. That's the first thing I'll do against my crossfire. I've done this with all my radios Frsky spectrum and crossfire. I put the transmitter on my coffee table (ground level) go outside into my truck and just drive with the transmitter. I've gotten farthest with crossfire dynamic range works every time. . I get 1km almost exactly through many building as I live in populated area.

  • @hateeternalmaver
    @hateeternalmaver 5 ปีที่แล้ว

    Thank you Drew, I was so stumped on this one regarding the receiver options etc. but with your, as small and silly it might have been to you, HD-Dog comparison I now get it! ;D

  • @ALNDAddiction
    @ALNDAddiction 5 ปีที่แล้ว

    Need help: using t-motor f4: video works, OSD works, only remote controller input via sbus doesn't work... any ideas?

  • @dalvynegron1938
    @dalvynegron1938 5 ปีที่แล้ว

    Could you make a video of how to connect this DJI FPV to an Eagle tree Vector controllers please Thanks

  • @peterher8179
    @peterher8179 5 ปีที่แล้ว

    What if I don't have the RX or RX3 pad?

  • @idk-ir6vv
    @idk-ir6vv 5 ปีที่แล้ว

    Can we use the camera and vtx of the dji system with our own goggles? Assuming they are already fairly good quality goggles?

  • @partsbenttoys
    @partsbenttoys 5 ปีที่แล้ว

    is it possible to set on flying wings ? maybe with a different board ?

  • @huckaberryfpv4986
    @huckaberryfpv4986 5 ปีที่แล้ว

    Miss this channel:)

  • @lutzvetter2438
    @lutzvetter2438 5 ปีที่แล้ว

    hello, do you know a way to display the osd from the board in the dji fpv glasses. Would like to know the last gps position during the crash?
    Thanks in advance.
    lutz

  • @camomaster6316
    @camomaster6316 5 ปีที่แล้ว

    So you say you can use it without a flight board, but yet you had to solder it to a flight board to get power to it. if I wanted to just strap it to an RC car or something how would I power it?

    • @DJRipGroove99
      @DJRipGroove99 5 ปีที่แล้ว

      I believe all it needs is power so you could just use a separate LiPo to power the Air Unit.