Ciao Daniele,tu mi sai dire come collegare il modulo su centralina elmod??? Non vorrei fare qualche cazzata pure se ci sto lavorando e pensando come collegarlo!!
Bro this is awsome!! Never cared for for the bb shooting. Now this l love!! Will be upgrading my Abrams and challenger ll with this mod and other mods you sell!! Thanks for sharing the love my brother 🙏
You don't have to cut anything at all very easy .just remove the barrel and the light blue part at the end of the barrel just remove it and you can put the hose in you have lots of room and you can still later if you want you can still use the bb later..but I added a nipple to the barrel and add the smoke to it so I can shoot the BB's and have smoke at the same time. Very easy to add to the Aluminum barrel
Awesome stuff Stanlley 😀 I had a feeling you would figure it out being the RC Tank Guru that you are 🤗 I was going to try and figure it out myself by somehow patching the cannon smoker into the flash unit, but was worried of ruining a circuit or something 😅
After seeing this video I am seriously considering buying a tiger 1 but I will not destroy the bb part I will make it recoil fire bb’s flash and smoke, I know it can be done fairly easy because if you can make a flashing smoking recoil gun on a Airwolf helicopter scaling up makes it easy to add bb capabilities I already know how in my head I will start to put the money together and buy an all metal 1/16 tiger 1 and video all
Hey Stanlley, this should also work with TK 7.0 right? Both MFU's have a Wi-Fi port (CN5) and a launch flashing light port (LED 1) Or am I missing something?
Hey Stanlley could you show how to do this with a recoil barrel? I think you would have to cut the white bb part differently! Thanks for teaching us how to mod our tanks so they can be there best!
pretty much the same- but i'm not going to using the stock BB unit for recoil, i'd use a recoil unit, still will route the hose into the barrel same way!
That is so wicked, I've been waiting for something like this. I'm pretty new to RC tanks though, I have a HL Leo with the v6.0, do you think it will still work with a 360 degree turret?
I have Tk 6.0 board. Can you tell me what ports the two plugs go to ( CN11 & LED 1 with a jumper in portCN 5 or CN6) to fire, must one press G&S first to activate?
That was my thought as well. Why not fill the air cylinder that makes the BB fly with smoke. There wont be any room for the LED but I still think it's a better option.
@@StanlleyLegion Thank you I have a Torro Leopard 2A6 all-metal, will the new smoker work with the board, also I am trying to register so I can order, but can't find where to, and when will you get more stock of the smokers, please. can you advise thank you
@@malcolmgillam5910 hi Malcolm, we should be albe to restock in a week or so! www.rctanklegion.com/products/new-cannon-smoke-unit-with-barrel-flash-kit
Can this be somehow used with a 360 degree turret rotation? My M1A2 has the 360 degree rotation and don't want to loose that. If so, how and what parts will be needed.
I'm hoping you can help as I'm lost. I bought this unit 1:16 Torro Tiger I RC Tank Pro Recoil Firing Unit off of eBay for my Heng Long tiger 1 so my barrel will recoil. Of course no instructions come with this unit. Do you have any knowledge that would help me install this unit.
@@StanlleyLegion One issue I have for the v7.0 board. I didn't end up cutting the BB unit and left it in Channel 1. But the issue I get is that the firing, flash and recoil are not all synced at the same time. there's a slight delay with the recoil. Does the jumper solve that problem?
Hey I have two questions, first off I have a very old probably bought in 2010 Hen Long 1/16 Tiger I with metal tracks. I've weathered and aged it to make it look realistic, I've also change out speaker for much bigger with custom box for beefier sound and added a new Ni-Mh battery. I've also added I believe it is a TARR MK3 smoke unit to it which give much better smoke output and it is proportional as well. I've been wondering if you know if it would be possible to add a second smoke unit so that each exhaust has separate smoker for more smoke without changing out the main board. I do see there's one more 2 pin outlet next to the smoke outlet that's in use but not sure if its for that and if it would be safe to use. Another question is if you think it would be possible to add smoke generator for a BB canon?
hi Olgierd thanks for your question. the older MFU may not be able to handle the heavier load. Also TARR is not very smokey to begin with. cannon smoke is available but not with this MFU. you need to use say HL v6.0 or TK boards for this feature
awsome video. question. I want to keep the 360 turrent and barrel recoil. If i modify the bb unit like you did, will it still recoil BUT without the hesitation?
Hello already customer I have two questions, only tutorial on assembly on clark tk 60 and other tightened well thank you. Second question should this generate the turret rotation? And this modification is possible if there is a canon taigen recoil engine?
I just installed it and it is fantastic 😀. My ir emmitter isn't working now 😑. Does this have anything to do with it?? Sherman henglong 6.0 any advice would be greatly appreciated
The original IR emitter isn't the best quality. Turn off the cannon smoke and see if it works. If it does then its just blocked by the smoke.. But you can upgrade the LED
@@StanlleyLegion Thanks Stanley that's very helpful. I have seen someone else do the same thing (using the gap), so the next (obvious) question is after looking at your video would I still need to make a jumper or would that wire be need to be connected to make sure the recoil continues to work?
@@StanlleyLegion Hopefully the last question, I have the V7.0 system board which does look a little different to the one in your video, would the same channels be used for this upgrade on the V7.0 as the V6.0?
@@telboye873 yes for the cannon smoke should be the same- and v7.0 has the instant fire function (G + right silver button) which don't require the jumper
not that impressed just a tank took a puff of e-cigarette. it'd have been more impressed if it had breathed out of dark clouds of smoke instead. is there a way to make the color of smoke darker? thanks for sharing your great video.
Hi, just bought a heng long sherman tank, and sent off for the smoke flash kit, do I just follow these steps? Also if you cut off the section you marked would that not cause problems, I'm a novice and don't want to ruin a brand new £150 tank
@@StanlleyLegion Thank you for your reply. Gun smoke only works with V6 board. I've seen your video on this mod. Looking at the Lepard A6. My Regards, kevin
@@StanlleyLegion thanks im new to this rc tanks world and always wanted the king tiger ive watched alot of your videos and learnt alot from thanks again and keep up the good work
tolong amat jangan guna vape... wick akan rosak. Guna mineral oil based product ya. www.rctanklegion.com/collections/smoke-scent/products/mega-steam-smoke-oil-for-smoke-unit-rc-tanks--trucks--trains-etc
@@StanlleyLegion faham bang.. Kirenye link yg bang bgi nie smua ada jual yer dekat kedai bang stanlley?? 👍👍👍.. Tq bang sbb respond.. Senang la sya nak cari mcm nie
I just purchased this with no flash LED, only the heating element and motor. I connected the heating element to CN5 and the motor on CN2 which is available port. I also put jumper on CN6, But when I press buttons G and S, smoke comes out non stop. Did I connected wrong here? Pls advise. My board is Version 6.0
Stanlley Legion thanks for the reply. i would love to get that board you’re talking about but I Can’t find it on your website. Do you sell the separately? Also the smoke cannon kit for heng long version 6.0 currently is out of stock in your website but I will keep checking your website.
Hi @stanlley, I've been looking for a Heng Long King Tiger pro with barrel recoil. I think this mod would be absolutely perfect for it. However I've read that apparently HL doesn't make them with BB + IR + Barrel recoil anymore. Only IR + barrel recoil, or BB without barrel recoil. Would you happen to know if/where I can still get one that has both?
Thanks for your quick reply@@StanlleyLegion That's interesting, Motion RC lists 'Barrel Recoil' in the features list of the HL King Tiger Pro (seems like I can't post the link, sorry) So much conflicting information. This is a hard hobby to get into as a newbie ;) I did find the Torro/Taigen 11510-CA which has all the features including Recoil and smoke barrel, but where's the fun in buying something that needs no modding ;)
I’m waiting on my transmission for my T-72, i love that smoke and am going to want to add that too. What tanks take the slower metal transmission Stan, I bought one on accident and I don’t want it to go to waste, if you could list me some tanks that are comparable with the slower metal transmission I would greatly appreciate it my friend
Also the size of a slow or fast gearbox is the same size, they just have a few more gears. Take a Tiger it will fit a 5 gear gearbox. As it will fit a 3 gear gearbox. Both will fit, same for all Heng Long TANKS.
Stanley l remember when l told you about this. An you were, ummm lm not sure about this, lve never done this before. An l said it's easy. Now u tell me, was l wrong. The only problem for me is lve got 20 of em. An l was going to send you 1 for my LEO build. But l told you they would come, an here they are. Wicked. But l don't like the led!! It's not bright at all. Can you fit the Super Bright led with the barrel smoker?? That's what ld be looking for. See l told you they were coming. An hear they are. There's actually an easier way to do it. Just drill a small hole in the barrel were it's in the turret fit a plastic reticulation adapter tube that's made to go from the main tube to a small tube, witch is the exact same size as the smoker tube. U just fit the small plastic inline adapter into the barrel, were u drilled the hole attach the smoker tube to it an the force of the smoker pump + the recoil of the barrel will force the smoke out. Sounds complicated, but it's very easy. Drill put plastic adapter in attach smoker tube done. That's how lve done my Abrams Stan, didn't have to cut anything!! But lm glad you've finally got em. PS: Mite be helpful if u did a video using the barrel smoker with the CLARK TK60 or whatever. I use mine with the TK60 + BENEDINI MINI. I think this would be useful as most people will be using the barrel smoker with the CLARK series. Great Job. Thanks Stan Aussie Scott.
@@StanlleyLegion Hi Stan I new you would, it's not that difficult. But l wanted to say if you put the tube right to the end of your barrel. It blows out so far it's not realistic. You should try it with the tube half way down the barrel, it's much more realistic. Aussie Scott.
@@StanlleyLegion Taigen sells a servo board for their Tiger 1 Mid Ver. This can be used to hot wire any output from any board and use that signal to operate the servo itself. The only draw back is that I can only be used for the recoil function since its hard wired to the board. FYI
Thanks, Stanlley, for such a clear and concise video! I just hooked one of these up to a 7.0 board and it works great! What’s really nice is the sound, flash, and smoke are nicely synced. I almost feel like I’m firing the real deal. :) th-cam.com/video/boVZuC_siC0/w-d-xo.html
@@StanlleyLegion Guy Coté Guy Coté il y a 1 an (modifié) Thanks for all yours greats videos, my question is, can we intalls this upgrade on Tamiya DMD module.....??
Wow! Did not know you could add smoke! Definitely want that in my abrams!
This will be great for my HL king tiger tank (Modified Edition).
Woww... Che spettacolo... Sembra vero... Ecco cosa ci mancava ai carri Heng Long...magnifica invenzione...Bravo Stanley... Ciao dall'italia
Ciao Daniele,tu mi sai dire come collegare il modulo su centralina elmod??? Non vorrei fare qualche cazzata pure se ci sto lavorando e pensando come collegarlo!!
Bro this is awsome!! Never cared for for the bb shooting. Now this l love!! Will be upgrading my Abrams and challenger ll with this mod and other mods you sell!! Thanks for sharing the love my brother 🙏
That is brilliant, well-done man.
Thank you very much, I always wanted to do this on my bb tank but it always seemed impossible to me. Can’t wait to try out !!
You don't have to cut anything at all very easy .just remove the barrel and the light blue part at the end of the barrel just remove it and you can put the hose in you have lots of room and you can still later if you want you can still use the bb later..but I added a nipple to the barrel and add the smoke to it so I can shoot the BB's and have smoke at the same time. Very easy to add to the Aluminum barrel
Love to see a system like this designed for Taigens
Works on any tank!! I already have them.
working on 1~!
Thank you so much! Is it possible for you to make a video for a BB cannon with smoke function.
Jeez. Wh;y they never released this in their very 1st edition??? I would have expected this years back
New innovation
Amazing
Brilliant!! Definitely going to get one of these from you, thanks for showing how easy it is to add :-)
this gun smoke system looks big
would this fit in a a sherman and tiger tank from mato ?
Yes we have it
Awesome video!!! You never disappoint!!!
Let us know how to get it working with the Clark TK40 🤗 Keep up the great work and videos Stanlley 👍
yes- already, i'll make a 3rd video on how to. Super easy once we found out how!
Awesome stuff Stanlley 😀 I had a feeling you would figure it out being the RC Tank Guru that you are 🤗 I was going to try and figure it out myself by somehow patching the cannon smoker into the flash unit, but was worried of ruining a circuit or something 😅
@@garyhunt9838 3rd episode will be released soon
Thanks for sharing all this information. thank you.
This man is a genius!!!
have you figured out a way to refuel this without opening the tank chassis
After seeing this video I am seriously considering buying a tiger 1 but I will not destroy the bb part I will make it recoil fire bb’s flash and smoke, I know it can be done fairly easy because if you can make a flashing smoking recoil gun on a Airwolf helicopter scaling up makes it easy to add bb capabilities I already know how in my head I will start to put the money together and buy an all metal 1/16 tiger 1 and video all
I'd be interested in seeing this. Please do post a video of how you did it and the results of course!
Hey Stanlley, this should also work with TK 7.0 right? Both MFU's have a Wi-Fi port (CN5) and a launch flashing light port (LED 1) Or am I missing something?
Yes I believe it should be the same
@@StanlleyLegion Thank you Stanlley !
Wait a minute, no more 360° turret with this mod?
Hey Stanlley could you show how to do this with a recoil barrel? I think you would have to cut the white bb part differently! Thanks for teaching us how to mod our tanks so they can be there best!
pretty much the same- but i'm not going to using the stock BB unit for recoil, i'd use a recoil unit, still will route the hose into the barrel same way!
Hey - can I use this on my Henglong 1/8 metal Tiger 1?
Not sure. What is your control board
Fantastic! Does it fit the IR version?
Yes
Does it fit 6.0S and 6.1S ? Thanks!
Yes it does perfectly
can you reduce the smoke that comes out of the barrel
Make a separatly movie about HOW TO MAKE A JUMPER... :)
Hi there. Awsome feature! Is this system also suitable for the Tamiya 1/16 Leopard 2a6?
unfortunately, don't think there's space in the turret though.........
That is so wicked, I've been waiting for something like this. I'm pretty new to RC tanks though, I have a HL Leo with the v6.0, do you think it will still work with a 360 degree turret?
yes but the wires isn't connected to the 360 slip ring, so turn back where you turn from.. (2 turns left, so 2 turns right back)
@@StanlleyLegion Hello! I have a tiger 1 with version 7 board. Do you think they will work on it? And do you need a jumper?
@@JLinv2 yes it works, jumper optional as v7.0 can fire without the airsoft
I have Tk 6.0 board. Can you tell me what ports the two plugs go to ( CN11 & LED 1 with a jumper in portCN 5 or CN6) to fire, must one press G&S first to activate?
Thanks for all yours greats videos, my question is, can we intalls this upgrade on Tamiya DMD module.....??
PLeaze, I need answer ...my rc tank club waiting for ...!
Hi there, how do you make this work on a ibu ultimate? THX a lot!
shame you still have the track recoil enabled, also i;m sure you can do it without loosing bb function, but i will get back to you on that
Okay...this is COOL! How long until it works with the TK40 board?
got it working and smoking!
I am going to incorporate this with a HL that actually fires the BB :-)
That was my thought as well. Why not fill the air cylinder that makes the BB fly with smoke. There wont be any room for the LED but I still think it's a better option.
We can modify it without remove BB launcher. Should be able to see disturbed smoke like real cannon fire.
No not possible
Stanlly if the tank is infrared will the tube go in without cutting the mechanism, or do you still have to cut. thank you
The IR LED is not inside the barrel, so no problem. The IR LED is usually mounted in the manlet
@@StanlleyLegion Thank you Stanlly so I will still have to cut the mechanism.
@@malcolmgillam5910 yes
@@StanlleyLegion Thank you I have a Torro Leopard 2A6 all-metal, will the new smoker work with the board, also I am trying to register so I can order, but can't find where to, and when will you get more stock of the smokers, please. can you advise thank you
@@malcolmgillam5910 hi Malcolm, we should be albe to restock in a week or so!
www.rctanklegion.com/products/new-cannon-smoke-unit-with-barrel-flash-kit
Can this be somehow used with a 360 degree turret rotation? My M1A2 has the 360 degree rotation and don't want to loose that. If so, how and what parts will be needed.
you can, but you'll need to wire this through the slipring. I'd just remember to rotate the turret back to prevent the wires from tangling.
does the cannon still go up and down???
yes of course!
@@StanlleyLegion Thanks Stanlley!
I'm hoping you can help as I'm lost. I bought this unit 1:16 Torro Tiger I RC Tank Pro Recoil Firing Unit off of eBay for my Heng Long tiger 1 so my barrel will recoil. Of course no instructions come with this unit. Do you have any knowledge that would help me install this unit.
sorry mate- it is NOT compatible
Could this in theory be wired in to work with the bb unit? You could get it to feed smoke and then fire with the bb and air pressure
Nah I don't think so, no space..
Could you make a kit that combines this smoke/light unit with a barrel recoil unit? And also have an install guide for that kit? (for Heng Long Tanks)
yes- working with CLARK on this, but you NEED to change the board to CLARK TK board
Hello! I have a tiger 1 with version 7 board. Do you think they will work on it? And do you need a jumper? @Stanlley Legion
Yes it works fine for v7.0
@@StanlleyLegion One issue I have for the v7.0 board. I didn't end up cutting the BB unit and left it in Channel 1. But the issue I get is that the firing, flash and recoil are not all synced at the same time. there's a slight delay with the recoil. Does the jumper solve that problem?
thanks so much for the info! got the jumper cable and works great!
Hey I have two questions, first off I have a very old probably bought in 2010 Hen Long 1/16 Tiger I with metal tracks. I've weathered and aged it to make it look realistic, I've also change out speaker for much bigger with custom box for beefier sound and added a new Ni-Mh battery. I've also added I believe it is a TARR MK3 smoke unit to it which give much better smoke output and it is proportional as well. I've been wondering if you know if it would be possible to add a second smoke unit so that each exhaust has separate smoker for more smoke without changing out the main board. I do see there's one more 2 pin outlet next to the smoke outlet that's in use but not sure if its for that and if it would be safe to use. Another question is if you think it would be possible to add smoke generator for a BB canon?
hi Olgierd
thanks for your question.
the older MFU may not be able to handle the heavier load. Also TARR is not very smokey to begin with.
cannon smoke is available but not with this MFU. you need to use say HL v6.0 or TK boards for this feature
Has anyone added smoke and still managed to have the BB still function ?
someone did, but he piped the smoke outside the barrel then back in, recoil will not work and not very scale look
I have a question for you Stanley. What's the difference in 2.4ghz leopard 2a6 and a leopard tk6.0 leopard 2a6?
Conect for elmod???
awsome video. question. I want to keep the 360 turrent and barrel recoil. If i modify the bb unit like you did, will it still recoil BUT without the hesitation?
Not sure about your tank. Is the recoil activated by BB motor or servo. If servo no problem. If motor.. That's gone
i can not see in video but must the rest of parts in the Hull or somewhere else?
if you have the space, turret will be the best choce. and lower hull is the last choice,
Hello already customer I have two questions, only tutorial on assembly on clark tk 60 and other tightened well thank you. Second question should this generate the turret rotation? And this modification is possible if there is a canon taigen recoil engine?
I just installed it and it is fantastic 😀. My ir emmitter isn't working now 😑. Does this have anything to do with it?? Sherman henglong 6.0 any advice would be greatly appreciated
The original IR emitter isn't the best quality. Turn off the cannon smoke and see if it works. If it does then its just blocked by the smoke.. But you can upgrade the LED
Definitely interested in this upgrade. My only question is will it remove the gun recoil function from my series 7 (latest version) Tank???
Most likely, as that's powered by the airsoft mechanism. If so you can shove the tube into the gap between airsoft and the barrel
@@StanlleyLegion Thanks Stanley that's very helpful. I have seen someone else do the same thing (using the gap), so the next (obvious) question is after looking at your video would I still need to make a jumper or would that wire be need to be connected to make sure the recoil continues to work?
@@telboye873 yes jumper is needed
@@StanlleyLegion Hopefully the last question, I have the V7.0 system board which does look a little different to the one in your video, would the same channels be used for this upgrade on the V7.0 as the V6.0?
@@telboye873 yes for the cannon smoke should be the same- and v7.0 has the instant fire function (G + right silver button) which don't require the jumper
great if you can integrate into the TK
not that impressed just a tank took a puff of e-cigarette. it'd have been more impressed if it had breathed out of dark clouds of smoke instead. is there a way to make the color of smoke darker? thanks for sharing your great video.
Unfortunately no such luck with darker smoke colour. Only white.
@@StanlleyLegion does the hl leo 2a6 use the same barrel firing mechanism where the base has to be milled off for this mod?
No idea, but the BB unit definitely needs to be cut
I want all those and still keep my bb function. Is it possible?
sorry no can do... impossible
So does this not work with the 7.0 new version heng long tanks
It should. This video is 1 year old
Hey, just a quick question, I have a heng long king tiger, 6.0s, do I just follow same procedure?
Yes exactly
Hi, just bought a heng long sherman tank, and sent off for the smoke flash kit, do I just follow these steps? Also if you cut off the section you marked would that not cause problems, I'm a novice and don't want to ruin a brand new £150 tank
So if l cut off the bottom of the bb unit will it still have barrel recoil?? Thanks.
Hey is it possible to have BB and Smoke with recoil also ?
Nope
I have an IBU2U will there be a version to fit this?
yes we do www.rctanklegion.com/collections/smoke-scent/products/new-cannon-smoke-unit-with-barrel-flash-kit
Do the upgrade with an actual flasher not an LED, it should look much better.
Yes we sell the ultra bright flash unit as an option
Dear Stanley, Thank you for the video. Please advise, will this smoking gun mod work with the Centurion tank ? Thanking you in advance. Kevin.
hi Kevin!
most welcome, it should, and what is your control board?
@@StanlleyLegion Dear Stanley, I've not purchased the Centurion. I've got to make sure the tank is fitted with a fitted smoke unit and BB mechanism.
@@kevingrainger2530 you cannot use the BB unit with the cannon smoke unit. Did you watch the video where I explained why? haha
@@StanlleyLegion Thank you for your reply. Gun smoke only works with V6 board. I've seen your video on this mod. Looking at the Lepard A6. My Regards, kevin
thats the best that i can do with my leopard 2a6 / bc u cant buy an 2a6 with smoke in barrel :(
Could this fit the taigen tanks
Unfortunately no
How well does this work with HL with recoil unit?
works great
will this fit the heng long king tiger 6.0 version
Yes but the airsoft is removed
@@StanlleyLegion thanks im new to this rc tanks world and always wanted the king tiger ive watched alot of your videos and learnt alot from thanks again and keep up the good work
@@michael1968-m9b Thanks Michael!
@@StanlleyLegion would the flash smoke work with a recoil barrel at all
@@michael1968-m9b definitely, but depending on the recoil type.. the HL "bow and arrow" type? nope. but the "real recoil" type, yes
Bang.. Nak tnye klau minyak untuk smoke tu dah hbis nak refill pakai minyak ape yer?? Sbb ade yg kata pkai vape oil??
tolong amat jangan guna vape... wick akan rosak. Guna mineral oil based product ya.
www.rctanklegion.com/collections/smoke-scent/products/mega-steam-smoke-oil-for-smoke-unit-rc-tanks--trucks--trains-etc
@@StanlleyLegion faham bang.. Kirenye link yg bang bgi nie smua ada jual yer dekat kedai bang stanlley?? 👍👍👍.. Tq bang sbb respond.. Senang la sya nak cari mcm nie
Yes bro
Will this ever be available for the TK7?
it's compatible with the HL v7 series
Well, this is almost genius! So Stan, how would you make this work if you just had an IR tank (if possible)?
this will work with IR tanks, why won't it?
unless your IR LED is in the barrel.. we usually mount ours on the barrel in a LED holder.
@@StanlleyLegion no IR unit IN the barrel, lol. I just thought it might interfere with the cannon smoking unit in the MFU (the IR system). Ok
I just purchased this with no flash LED, only the heating element and motor. I connected the heating element to CN5 and the motor on CN2 which is available port. I also put jumper on CN6, But when I press buttons G and S, smoke comes out non stop. Did I connected wrong here? Pls advise. My board is Version 6.0
you need the board mate, that's the trigger mechanism and timer
Stanlley Legion thanks for the reply. i would love to get that board you’re talking about but I Can’t find it on your website. Do you sell the separately? Also the smoke cannon kit for heng long version 6.0 currently is out of stock in your website but I will keep checking your website.
Hello,
Can i buy it from Germany?
No, my website is Www.rctanklegion.com and we ship to Germany
Hi @stanlley,
I've been looking for a Heng Long King Tiger pro with barrel recoil. I think this mod would be absolutely perfect for it.
However I've read that apparently HL doesn't make them with BB + IR + Barrel recoil anymore. Only IR + barrel recoil, or BB without barrel recoil.
Would you happen to know if/where I can still get one that has both?
sorry mate- not sure where you got that from, HL never made BB tanks with recoil. Taigen did though.
also, all are IR capable too
Thanks for your quick reply@@StanlleyLegion
That's interesting, Motion RC lists 'Barrel Recoil' in the features list of the HL King Tiger Pro (seems like I can't post the link, sorry)
So much conflicting information. This is a hard hobby to get into as a newbie ;)
I did find the Torro/Taigen 11510-CA which has all the features including Recoil and smoke barrel, but where's the fun in buying something that needs no modding ;)
@@NoobOnTour024 hi Luck, best to get a Pro version, then mod from there, and get an aftermarket board like the TK40S, it's worth your money
I’m waiting on my transmission for my T-72, i love that smoke and am going to want to add that too. What tanks take the slower metal transmission Stan, I bought one on accident and I don’t want it to go to waste, if you could list me some tanks that are comparable with the slower metal transmission I would greatly appreciate it my friend
Any WW II TANK is a slow moving tank German, British, American. Any of them will be perfect for the slow gearbox. Hope this helps.
Also the size of a slow or fast gearbox is the same size, they just have a few more gears. Take a Tiger it will fit a 5 gear gearbox. As it will fit a 3 gear gearbox. Both will fit, same for all Heng Long TANKS.
scott P I think I got an older generation because the holes don’t Align properly with the screws
scott P if you have an Instagram I’d happily send you pictures of the problem I’m having.
@@lm0bama Sorry l don't use instagram or Facebook or any of that stuff. What is you're problem?? I'd be happy to help if I can.
How to connect this kit to IBU2 board?
we have the IBU set on my website www.rctanklegion.com
@@StanlleyLegion I already have same kit for IBU2 i need connection info
Stanley l remember when l told you about this. An you were, ummm lm not sure about this, lve never done this before. An l said it's easy. Now u tell me, was l wrong. The only problem for me is lve got 20 of em. An l was going to send you 1 for my LEO build. But l told you they would come, an here they are. Wicked. But l don't like the led!! It's not bright at all. Can you fit the Super Bright led with the barrel smoker?? That's what ld be looking for. See l told you they were coming. An hear they are. There's actually an easier way to do it. Just drill a small hole in the barrel were it's in the turret fit a plastic reticulation adapter tube that's made to go from the main tube to a small tube, witch is the exact same size as the smoker tube. U just fit the small plastic inline adapter into the barrel, were u drilled the hole attach the smoker tube to it an the force of the smoker pump + the recoil of the barrel will force the smoke out. Sounds complicated, but it's very easy. Drill put plastic adapter in attach smoker tube done. That's how lve done my Abrams Stan, didn't have to cut anything!! But lm glad you've finally got em.
PS:
Mite be helpful if u did a video using the barrel smoker with the CLARK TK60 or whatever. I use mine with the TK60 + BENEDINI MINI. I think this would be useful as most people will be using the barrel smoker with the CLARK series.
Great Job.
Thanks Stan
Aussie Scott.
yes now I am enlightened. Gotta figure out how to use with TK boards though
ok- just made it work with the TK boards ;)
@@StanlleyLegion
Hi Stan
I new you would, it's not that difficult. But l wanted to say if you put the tube right to the end of your barrel. It blows out so far it's not realistic. You should try it with the tube half way down the barrel, it's much more realistic. Aussie Scott.
Hi pls tell me trigger board where can buy ?and
TK35 board support ? Tks a lot
my website www.rctanklegion.com
not sure what is TK35, is that 1/35? scale?
@@StanlleyLegion Thank you sir TK35 ment
Clark model product mother board can be 1/16 1/35 Tks
Wow your trigger board for Clark sold out or buy another？
You need for Clark? I should have it, just email me
@@StanlleyLegion okok Tks a lot
Hello, i need the same for my 1/6 kingtiger and Elmod ver F 😁
sure
Does this work in HL jagdpanther?
Yes it should, but v6.0
@@StanlleyLegionok but when it comes back stock
@@iajs5350 end of next week I hope
help me for this please
Can this setup work a 360 degree turret
You can. Just turn back
What do you mean, just turn back? Turn what back my friend?
@@michaeldunner7891 the turret. If you turn the turret to the left 1 full turn, remember to unwind the turret right 1 full turn.
That you
Can you make a video on how to install a barrel stabilizer with a 6.1 Main board please
Can this be installed into Clark TK22 board?
yes but get the CLARK version yea
Does this work with taigen?
At the moment no
@@StanlleyLegion aw okay, thanks for the reply.
🎈🎈👍👍
How about 5.3 board, compatible?
yes but you need to work on the limit switch..
Hi Stanlley, is this working with a Taigen V3? Thanks in advance
it should- just need to solder the trigger to the flash board
@@StanlleyLegion can i contact you privat? Telegram or mail? Or facebook? Thanks
@@pete7315 FB: Stanlley.tai
@@pete7315 just tested: Taigen cannot use
Thanks for testing Stan. Can i solve this problem otherwise? Maybe solder the trigger to the flashlight?
Can you add a servo for barrel recoil?
yes, but only for certain boards.
v6.0 doesn't support servos.
v6.1 support servos
@@StanlleyLegion Taigen sells a servo board for their Tiger 1 Mid Ver. This can be used to hot wire any output from any board and use that signal to operate the servo itself. The only draw back is that I can only be used for the recoil function since its hard wired to the board. FYI
Boss , klau i hantar i punya tank u bole buat kn x
Boleh, kena tengok version tank
@@StanlleyLegion i punya pro ver boss
@@rarecollectable8878 ya bro tapi MFU version apa? Itu maksud saya. V6.0? Kalo v5.3, v5.2 tak boleh
@@StanlleyLegion ok bos
@@StanlleyLegion 7.0 punya boss , bole buat x
Thanks, Stanlley, for such a clear and concise video! I just hooked one of these up to a 7.0 board and it works great! What’s really nice is the sound, flash, and smoke are nicely synced. I almost feel like I’m firing the real deal. :) th-cam.com/video/boVZuC_siC0/w-d-xo.html
So, never got answer...Are you still in tune....??
Sorry but what was your question?
@@StanlleyLegion Guy Coté
Guy Coté
il y a 1 an (modifié)
Thanks for all yours greats videos, my question is, can we intalls this upgrade on Tamiya DMD module.....??
@@guycote467 unfortunately, Tamiya do not support any of the smoke functions
@@guycote467 Not possible for Tamiya, as Tamiya DMD does not support any smoke functions
Oh orang Malaysia
Ya bro
@@StanlleyLegion kok video nya bahasa Inggris
how do you make this work on a Torro/Taigen V3 ?
Hmm plug it to the engine smoke and trigger from the flash unit