On its menu parameter that idling starting low voltage (110v) before becoming high at around 240 and cooling of 110v low, thus operation as it is an MTS set only thus pressure sensor is active on low. However, it has a water and fuel separator to manage that diesel.
Lods pag NO shut down alarm Mains under volt Ano Kaya sira nya kc ginagamit PA din namin kahit may alarm na ganyan gang ngaun nag loko na sya may nakita aq sa display CRANK REST ayon on/off na sya NG kusa ayaw mag tuloy andar namamatay din andar
Boss hinge lang ako ng tulong din. Hindi ko po kasi mapagana yung oil pressure sensor and temperature sensor ng CATERPILLAR na Generator set pinalitan ko po sya ng smartgen 6110 na controller.
Sa SET Parameters menu po to activate ung input na sensors. Parameters rin Sir ung limit temperatures. Also watch na rin po ung mga Genset content po. Salamat.
sa smartgen Hindi yan reset lang Sir. Nariyan pa rin Ang trouble. Pressure sensor ay nakakabit sa makina and or faulty pressure sensor. during the run Yan Sir makikita result and same scenario kapag ipipilit intermittent.
Through smart gen intervention. And why to reset it to default?. In this type of trouble of Low Pressure, need no reset default parameters as it cause another trouble as its sensors set to stop the engine in case of anomaly on its devices been detected. 60C is alarming as overheat is possible engine related trouble. Coolant and Engine Oil must be check and basic parameters.
I have same type of generator, older version. Is showing me "Low pressure alarm (IN)".
Is because of the diesel? What you think?
On its menu parameter that idling starting low voltage (110v) before becoming high at around 240 and cooling of 110v low, thus operation as it is an MTS set only thus pressure sensor is active on low. However, it has a water and fuel separator to manage that diesel.
@@ka-basicchannel3485it also has air on the diesel circuit... I prime the diesel filter and after is having air inside again
Ayos lods...
Sir pwede po ba ma by pass yang oil pressure sensor para mapa gana ang genset? Cummins 6bt 5.9 engine po
Ecu ang nagmomonitor nyan, kung inibypass ang ang sensor na yan na wala namang anomaly ay bale wala na ang ecu para maprotektahan ang makina.
Lods sa boss q ganyan din
NO SHUTDOWN ALARM
MAINS UNDER VOLT
Maari din Kaya oil sensor yan ang problema?
Naka MTS set ito paps Cummins 425kva na nakaset ang parameter sa starting and idling (cooling) na under volt kaya critical ang manual transition.
Yong Genset Namin nilagyan ko ng maraming diesel pero nag alarm parin yong fuel niya ano kaya problema non
Check paps Yung event Logs kita riyan Ang cause. Maaaring High Temp meron din po tayo contents para riyan and how to find event Logs on Genset.
Salamat paps sige panoorin ko yang tutorial video mo paps maraming salamat SA idea..
Ano dapat gawin pag high temperature paps?
hard start yan boss.di aandar yan .kilangan pump ung fuel ..ganyan ang alaga ko.
Lods pag
NO shut down alarm
Mains under volt
Ano Kaya sira nya kc ginagamit PA din namin kahit may alarm na ganyan gang ngaun nag loko na sya may nakita aq sa display
CRANK REST
ayon on/off na sya NG kusa ayaw mag tuloy andar namamatay din andar
Boss hinge lang ako ng tulong din. Hindi ko po kasi mapagana yung oil pressure sensor and temperature sensor ng CATERPILLAR na Generator set pinalitan ko po sya ng smartgen 6110 na controller.
Sa SET Parameters menu po to activate ung input na sensors. Parameters rin Sir ung limit temperatures. Also watch na rin po ung mga Genset content po. Salamat.
reset lang boss. ok na yun? sana pinaandar din
sa smartgen Hindi yan reset lang Sir. Nariyan pa rin Ang trouble. Pressure sensor ay nakakabit sa makina and or faulty pressure sensor. during the run Yan Sir makikita result and same scenario kapag ipipilit intermittent.
How to reset idol?
Through smart gen intervention. And why to reset it to default?. In this type of trouble of Low Pressure, need no reset default parameters as it cause another trouble as its sensors set to stop the engine in case of anomaly on its devices been detected. 60C is alarming as overheat is possible engine related trouble. Coolant and Engine Oil must be check and basic parameters.