ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- What to do if your laser printer appears to be printing, no error messages, but no toner is being applied to the page. What to do if a laser printer is only printing white pages.
For any question or suggestion leave a comment
-----------------------------------------------------------------
email: link.accessori@libero.it
other links:
www.emmegiricam...
www.samsung.com...
store.hp.com/us...
www.brother-usa...
-------------------------------------------------------------------
You are a lifesaver. Printer did only print white pages - the pin to the toner roller was rusty and did not make contact with the printer.
Thanks very much. My HP M12W prints blank pages too. Having seen your video I finally found that my printer setting was set to print on both sides.
I just learnt that seal is removed and that worked for me. thank you :)
Should I remove d seal
My problem was that the toner was clumped & not being applied onto the developer roller. I solved it by running a the corner of a clean A4 paper into the slit behind the roller. No need to remove the roller. You should be able to slide the paper into slit/mouth at the back compartment of the roller where the new toner is stored. This problem happened after I refilled & living in a humid place, the toner powder clumped & blocked the slit. My printer was printing very faint half pages. Very similar symptoms with the drum ground contact fault & low toner powder fault IE not enough toner being applied to the paper . Ricoh 311 printer. Hopefully this helps someone. 😀
Nice work
Hi and thanks for the video. I have a HP Laserjet 3030 (B&W only). Even copy function turns a blank sheet. Only very very faint random lines across the page. Any guidance is much appreciated.
I think the problem is the toner cartridge
@@viandant5 Thanks for the response. I've tried it with 3 different brand new cartridges. How about the connection springs on the left side. There are 2 protruding springs on the left side.
They are the contscts between cartridge and the printer. They are connected with the main board. It could be a main board problem,
HP 1020 INITIALIZE MOTOR RUNNING BUT AND NOT GOING TO PICK UP PAPER ITS STOP WITH RED LIGHT,here you as proceed i follow with that tricks but not start print why fix please,manuualy open that also moving but stop with red
these methods do not work if the printer or the cartridge is broken. check if there is paper jammed inside the printer
I have an hp laserjet 100 color MFP m175nw printer that is printing with a blank area along the centre of the page. What could be the issue and how can l fix this.
It could be the toner cartridge or the laser scanner dirty. Probably the toner cartridge, check the toner cartridge
Can I remove d seal on toner cartridge so it can print fully
You must remove the seal fron the toner cartridge.
I have two Canon MF8180C color printers. Old but one brand new out of box prints only blank pages when copy is selected. Both B&W and Color selections. The old printer had a bad Fuser. Tried the fuser from the new in the old. I can copy B&W but color selection makes blank pages also. I tried new drum and toner as well as all combinations from old printer new printer and generic new toner set. No luck. Canon no longer supports. Any ideas before all goes in the trash?
Thank you.
Does your operative system supports the driver of these old machines. This could be the problem
Not using computer yet. Multi function machine with scanner fax and copier functions. Just straight copy function of machine without a computer connected. That probably will be another issue.
@@marka1952 I would try to change the transfer belt too and check the settings of the printer.
I have tried all the settings already. I’ll look into the belt. Thanks for your help.
I have a M452 printer and it will not print black on the supply page. I have exchange the toner with another toner and no black print. It will print the black arrow on the cleaning page but it will not print any text on the configuration page, supply page or any other internal reports. I have also updated the firmware. Any ideals on how to fix this?
heck the contacts between the cartridge and the printer, but it could be the laser scanner or the main board
Hello, my printer Brother is laser too. Dcp 2540dw. It prints clearly blank pages. The chronology is in the previous day i tried to change toner repeteadly about 3 times just to compare the quality between original toner with non original one that i bought recently. Because the original one seems start to make bad result. So i inteded to replace with non original which is cheaper. During that experiment was okay.
But after the next day, in the morning i found it blank pages. 😭. I use that machine for photo copy service in my little shop. I bought november 2019
Probably you have an idea what it may cause ?
It could be the drum unit, or a contact between the drum unit and the printer. Check it the toner cartridge is correctly installed. Try to remove and reinstall it.
what if it print full black pages from the scanner?
which printer?
@@viandant5 samsung cxs-3200
@@tek-nikulas1863 You should open the scanner unit and check the connectors, check if the scanner lamp is turning on
@@viandant5 problem solved sir.. i clean the connectors. tnx!
Excuse me, did you try and print a "Self Test/Device Configuration page" first.
It's a good idea if you dont' know if the problem is the printer or the connection
@@viandant5 Thank you. Printing the Self Test/Configuration page may provide a valuable clue. For example: an issue with the memory, or a different IP address.
Thanks much for the video....I have tried printer self test by commanding print printer supply status but it is still blank, also tried to change the drum cartridge but the problem persist...What could be a cause for my case!? Kindly advice mine is HP lasejet M602
Hi There! Thanks for this, but it doesn't quite address my specific issues. I have a Brother MFC9130CW, it prints the first half of the page with all colors well, and then fades out and goes blank for the rest of the page and any page after.
Check the trasfer belt. Check if in the color cartridges the toner rollers are regularly covered with toner
viandant5 not sure if that was it or wiggling stuff around a bunch, but its working now. Thanks!
Good Job and Expert Video
thank you!
Hi my printer hp color laser keeps printing blank pages or emojis on, what should i do
No one of these methods work?
Hey. I have a problem. My printer hp laserjet 2055 dn print the paper perfect from tray 1 and blank page(always) from tray 2. Can u help me plz?
I think that in the printer folder you have to select tray 2
@@viandant5 no...i found that the solonoid which responsible for picking up the paper from tray 2 needs cleanning...because this solonoid works as similar as the relay. Its closing without opening again because of some dust. So i cleaned it and the printer works pefectly now.
Thank you for the your responding....really appreciate it.
My hp laserjet p2035 have liquid spilled where page come out. Now my printer is printing blank pages what should I do
Liquid? Is the printer in a humid environment? There should be no liquid inside a laser printer
My HP 1018 printer is throwing blank pages between printed ones, totally confused???
check the printer properties, paper settings. does it happen only with a type of document?
where do we take the pull lever
Which pull lever?
Thanks but my Hp 712dn is printing blank pages only
If nothing works it could be a main board problem
Samsung clp 690 printing blank pages, but will print page after 4 or 5 tries.
Samsung CLP690? Are you sure? I think it's the same as CLP680. All colors? It could be related to the transfer belt
Hlo I have samsung m 2876nd printer , it print half side paper , when I refill its toner , what's solution for this ?
Is the toner roller fully covered with a layer of toner? Are you sure the cartridge is making correct contact with the drum?
@@viandant5 yes sir
@@simplestudy335 The problem is often related to the toner cartridge not fitting well against the drum unit. I think you have to disassemble and reassemble it again
Canon MFP4750 printer white print out please solution
Did you change the toner cartridge?
@@viandant5 allredy Change 2 toner not resolved issue
Please other solution
@@eromprakashsharma4208 Check if it prints the test page. If any of these suggestions works I think you must bring the printer to a repair centre. It could be a main board problem.
How to resolve thi issue Blank page on command but Test page on printer ok printer Moddle Canon 3050
It's probably a connection problem. Try to reinstall the printer driver. Change thwe USB cable
Samsung ml 2161 blank page print and red light problem.
It could have several causes. For start I would change the toner cartridge
if it is a new replacement toner cartridge then shake the cartridge
in a rolling manner for 3 to 5 minutes , then install it
Due to effect in cartridge toner was spilled inside printer. After cleaning the print with blower I replaced with new cartridge. Now it is printing white pages. I suspected that the laser mirror was contaminated with fine toner dust. I cleaned thoroughly the laser beam mirror. But not solved.
Anyone kindly help
Difficult to say without checking the printer, may be the compressed air damaged the scanner unit or the main board
Thank you so much 😇😇
Yeah and what if I can copy normally, but when I print of PC the pages come out blank? :D
It depends on which printer do you have. May be the printer driver
@@viandant5 figured it out. The cartridge and all was ok. It was something messing up with Excel table. Tested printing in other scenarios just in case and it was working ok. Thought it was weird.
Anyway, thanks for quick help.
@@info0 thanks much for the knowledge. But can you please share what exactly messed up with your exel, and how did you fixed it!?
@@munibullahmarunda7051 just formatting of cells was wrong in Excel, thus making even preview pages blank.
Had to copy whole table and create new document, paste it there, do the formatting again and... It decided to work.
Was simple solution really.
Hi My Brother printer prints text great. It just messed up printing a picture and left one side of photo blank. I got half a vertical picture. Half a pup. First time that has ever happen. I tried doing the cleaning thing and lining up thing. It still just prints half a pic. ???
Are ou sure the printer settings are correct? Check in the printer folder
sir brother printer mai page blank aa raha hai driver bhi stall hai potcopy nikal raha hu lank bta raha hai
He is not a Pakistani !
how to resolve the issue my laser Jet Pro 400 MFP M425dn print blank page after every page printing
Check the paper size in the printer properties, reinstall the printer driver
I wanted to use my HP color laserjet 2500l again and the problem was that the printer prints blank paper
(all 4 catriges are new) and i ran also the engine test and again blank page. What would you do???
It could be the drum unit, the transfer unit, the main board. It's difficult to say without checking the printer.
@@viandant5 Hi, dear, i changed also the drum today with an original new drum from HP, no changes. what would you do as next???
@@Massoudrad I think it's better to bring the printer to a repair centre. it might be the transfer belt but it has a cost
@@viandant5 Run an engine test again white paper.
@@Massoudrad The most probable cause is the main board
i came here because my hp printer will print its job, and then pop out a second blank page. every time.
Check the paper settings. Is the paper size correct?
Chal be