Working of Biogas plant |Fixed dome biogas plant|Deenbandhu Biogas plant

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 พ.ค. 2024
  • Working of fixed dome Biogas plant with animated slurry levels is discussed.
    Explains how much slurry is required to start the biogas plant and how much is pressure in biogas plant.
    Links of two videos mentioned in this video are given here
    1. Retention time video link • Retention time |Hydrau...
    2. Pressure video link • Visualize pressure | a...

ความคิดเห็น • 30

  • @shaker4891
    @shaker4891 2 ปีที่แล้ว +2

    Thank you for the info..
    How is the sludge removed out of the digester ?

    • @IntuitiveLearn
      @IntuitiveLearn  2 ปีที่แล้ว +1

      Slurry flows out due to gravity. The level of inlet is higher than that of outlet point.

    • @shaker4891
      @shaker4891 2 ปีที่แล้ว +1

      @@IntuitiveLearn that’s true for the slurry, but what I meant is the sludge that forms in the bottom of the digester tank after the accumulation of solids that settle in the bottom of the tank.. that usually happens after years of using, or after less than a year if you are feeding the digester different kinds of waste.. this sludge has to have an outlet pipe, and it gets dried up and then crushed, then you get a fertile soil as an another byproduct..

    • @IntuitiveLearn
      @IntuitiveLearn  2 ปีที่แล้ว +1

      Sludge which accumulate at the bottom of tank is usually Grit/sand having ( specific gravity) close to 2.65. As you rightly mentioned, it takes years for this condition to occur. Two methods are generally used or can be used
      1. Manually cleaning the digester through outlet tank
      2. Using pumps ( which can handle high solid content ) after putting water and breaking the bottom layer

    • @shaker4891
      @shaker4891 2 ปีที่แล้ว +1

      @@IntuitiveLearn thank you for the replies, very informative 🌻

  • @creations6111
    @creations6111 2 ปีที่แล้ว +2

    Very well explained and presented👏👏👌

  • @veenakumarisingh4162
    @veenakumarisingh4162 2 ปีที่แล้ว +1

    Very informative and comprehensible! Thank you for info, sir!

  • @mokhlesurrahman663
    @mokhlesurrahman663 5 หลายเดือนก่อน +1

    Thanks.

  • @rafaqathussain5374
    @rafaqathussain5374 3 หลายเดือนก่อน +1

    Firstly, let me thank you for having made the best video on the subject. Secondly, If I've 20 gercy cows, what size of the plant is recommended? And can feed the plant daily with the cow waste? Or should I keep the waste dumped elsewhere and feed the plant occasionally?
    Best regards

    • @IntuitiveLearn
      @IntuitiveLearn  2 หลายเดือนก่อน

      Glad it was helpful!

    • @IntuitiveLearn
      @IntuitiveLearn  2 หลายเดือนก่อน

      for 20 cows assuming 15 kg dung total dung is 300kg . approximately 12 cubic gas can be generated daily. dimensions of the plants require more data . These plants are designed such that all the cow dung is fed daily.

  • @amritap9584
    @amritap9584 2 ปีที่แล้ว +1

    Thank you sir for the info 👏👏🙏

  • @agritech802
    @agritech802 ปีที่แล้ว +1

    Thanks for a great video, do you have a way to keep it warm in winter?

    • @IntuitiveLearn
      @IntuitiveLearn  ปีที่แล้ว

      Two three ways
      1.Keep outlet slabs covered with insulated material e.g paddy straw
      2. Cover inlet after
      use
      3. Use hot water if available for daily feed

    • @agritech802
      @agritech802 ปีที่แล้ว

      @@IntuitiveLearn ok thanks

  • @AamirSaeedTajalli
    @AamirSaeedTajalli 2 ปีที่แล้ว +1

    Hello. Thanks for this informative / educational video. Nicely and wisely explained the concepts.
    I want to run a 15kVA gas generator, daily 8 hours and also want to keep 3 days gas in reserve.
    Can you please tell me quantity of biogas to be produced daily and what should be the size of fixed dome type digester?
    Thanks.

    • @IntuitiveLearn
      @IntuitiveLearn  2 ปีที่แล้ว

      Quantity of biogas will be 384 cubic meters
      Please check this link for calculations
      docs.google.com/drawings/d/1oFkH-xiieuxZBQ7vDbQNWGWhRbmc25veIP3IdDKkKtE/edit?usp=sharing

    • @AamirSaeedTajalli
      @AamirSaeedTajalli 2 ปีที่แล้ว

      Thanks a lot for your attention and response.
      Could you plz further guide about the size?

    • @IntuitiveLearn
      @IntuitiveLearn  2 ปีที่แล้ว

      The size of digester will require other inputs like e.g." retention time" which depends upon temperature conditions of the area.
      "type of feed" will also influence digester size
      For retention time you can see this video
      th-cam.com/video/ml4UmGdW2us/w-d-xo.html

  • @gautamprajapati5126
    @gautamprajapati5126 2 ปีที่แล้ว +2

    How in Hydrogen fuel cell work in submarine or ships please come video......
    I am Gautam prajapati automobile engineer

    • @IntuitiveLearn
      @IntuitiveLearn  2 ปีที่แล้ว +1

      As an Automobile engineer, you may be knowing better than me. Try making the video yourself and I will help, if needed.

  • @Jean-vz8co
    @Jean-vz8co 2 ปีที่แล้ว

    Very nice... except that the outlet system is totaly wrong!!!!!!!!!!!!!!!!!!!!!!!!!...............

    • @IntuitiveLearn
      @IntuitiveLearn  2 ปีที่แล้ว

      Thanks for taking time to comment. Could you please tell what is wrong in the outlet .

    • @Jean-vz8co
      @Jean-vz8co 2 ปีที่แล้ว

      @@IntuitiveLearn Never!!!!!!!!!!!!!!!!!!!!..................😉

    • @Jean-vz8co
      @Jean-vz8co 2 ปีที่แล้ว

      @@IntuitiveLearn You have to solve it by yourselfffffffffffff........................

    • @Jean-vz8co
      @Jean-vz8co 2 ปีที่แล้ว

      You have to find and solve it by yourself...........by

    • @paraspreetsidhu2404
      @paraspreetsidhu2404 10 หลายเดือนก่อน

      What is wate coln