Replacing the Door & Window Seals and Rubber Molding on a 2011-2017 Honda Odyssey Minivan
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- Despite the excellent engine, the 4th generation Honda Odyssey (North America) suffers from multiple premature body issues, defects, and malfunctions as it ages. One of these is deteriorating windows / door seals. The rubber molding on the sliding and front doors crumbles and cracks on multiple years and, in this video, we show you how to remove and replace the front and rear (rather expensive) molding assemblies.
Part numbers:
72410-TK8-A11 Molding Assembly, R Front Door
72450-TK8-A11 Molding Assembly, L Front Door
72910-TK8-A01 Molding Assembly, R Slide Door
72950-TK8-A01 Molding Assy., L. Slide Door
A sincere thank you as this video saved me both time and money. I thought I would have to loosen the side-view mirror and possibly remove the door panel, to install the molding on the front doors, based on the videos I first found. Replacement molding for the 4 doors cost me $235 from a local Honda dealer. I purchased a Dorman universal fit removal tool kit for $20 on Amazon. I was able to remove/install all 4 door moldings in under 20 minutes, as the tip on how to install the front door molding under the mirror was spot on. Bravo!!
Where did you bought this? My local dealer says $250 for only 2 door.
Great job. Other videos have you removing the mirror. You showed that isn't necessary! Saved me a lot of time and hassle! thanks!
Very helpful. I just did this and didn’t have to disassemble the mirror thanks to this video. Thanks!
Thank you for the great video! I haven't bought my parts yet & have been scouring the internet to find the correct parts, but you included the part numbers & description ! Well done, you!🙏🥰
I see that your side-view mirrors are peeling too :) Mine are much worse, but at 200,000 miles and running like a top, I'm not complaining! I watched your video because I was driving home this afternoon and I heard something banging on the side of the van. I looked over at the passenger door and saw the rubber part of the belt molding flapping around in the wind. Thanks for the video! I have a service manual, that's my next stop before the parts department.
Hat off to you for making this video, well explained thank you, I have 2011 and is my next project 👍👍👍👍
Very useful video, I followed the video and completed the replacement, the only regret is that the parts are too expensive. Thank you!
Good video. I need to do the passenger side on a 2014 I just purchased. Others videos show taking the door all apart so I’m definitely going to give this a try. I think going slow and reviewing this video along the way will be a great help. Thank you!
Awesome! Appreciated your time to put this video together. Thank you so much....
Thx. Helped a lot
How about the seal along the bottom of the tailgate glass?
Great tips!
Thank you for this very useful video, can you share a link to purchase those ? and the ref? I found some links but the reference is confusing :)
Awesome!! 👏🏻 thank you!
Where are you buy the seal
at any Honda dealer parts department
Bravo
Thank you for using a tripod, speaking loudly, and cutting between segments. Your video is really easy to follow. Thank you, sir. 🫡
Where can I buy these please.
Dang I try to remove it at the junk yard and it was almost impossible.
Such a bad design for a simple window seal, come on Honda look at your rating lately.