@@MAXROYMXCYare the overhauling gaskets are still available pls like valve seal pls... What ar the codenumber if ever pls help us where to buy easily pls
So sorry for that. This one I’ve shot in Timelapse mode due to limited space on my camera storage on that time. But anyway i will shot a video in slower version in future. Stay tuned.
I drive the Japanese-made Daihatsu MOVE with the larger 843 cc ED-20 which is basically identical to yours, except for the cylinder bore diameters. I could only obtain a pdf copy of the German-language shop manual which calls for the valves to be adjusted at operating temperature. The red arrow in the following image points to the specification for the inlet valve. The blue, of course, for the exhaust: i.imgur.com/0juKuCO.jpg I adjust mine cold, using the specifications from an older Honda 1200 cc engine of which comes close to the construction of my engine
kindly post the piston rings your using and how do you the genuine ones
Thank you for this. 👍
Also the valve seal we need pls
Pls help
We need overhauling gasket oh daihatsu mira l200s
We can't buy nothing here in philippines
Pls help how to contact the auto supply there pls
Do you have the manual with the torques to screw it when reassembling? Thanks
No I don’t have that. I refer to google whenever i need information. 😅
Im from malaysia i do have manual for everything ef 660cc engine overhaul manual i sell for 15$
Pls sir I need this job hw can give the advance
What do you need?
hi sir. may i.know the valve clearance intake and exaust. same engine with my hijet. hope you reply. thank you.
Hi. Usually I set the valves clearance for intake is 0.15mm and the exhaust is 0.20mm. Hope this information will help you. 😊
@@MAXROYMXCY thank you sir.
Pls help
Still auto parts of this engine pls
What kind of part you need. ?
Water pump
Also overhauling gaskets like...
Valve seal pls.... Help us....
@@MAXROYMXCYare the overhauling gaskets are still available pls like valve seal pls...
What ar the codenumber if ever pls help us where to buy easily pls
Also water pump pls help
Could you post the entire rebuild video? Without Timelapse please?
Unfortunately I record the video on timelapse 🙏🏻.
@@MAXROYMXCY 🥲
i meant for diahatsu hijet van 660cc
Hello sir can you send a slower one vedeo for your work
So sorry for that. This one I’ve shot in Timelapse mode due to limited space on my camera storage on that time. But anyway i will shot a video in slower version in future. Stay tuned.
@@MAXROYMXCY ok tnx
Puwede po mag pagawa sa Inyo sir
Pretty sure that’s an ED-10 850cc.
Almost the same. This one is 660cc
OK
I drive the Japanese-made Daihatsu MOVE with the larger 843 cc ED-20 which is basically identical to yours, except for the cylinder bore diameters. I could only obtain a pdf copy of the German-language shop manual which calls for the valves to be adjusted at operating temperature. The red arrow in the following image points to the specification for the inlet valve. The blue, of course, for the exhaust: i.imgur.com/0juKuCO.jpg I adjust mine cold, using the specifications from an older Honda 1200 cc engine of which comes close to the construction of my engine