Well ofc they wont blow up but it causes extreme stress to the parts because oil is coming at the same time as gas and when you engine break it revs and there is no oil. And thats just not how you ride a 2 stroke
FinKillerZ pelailee yup. like my friend. got a 5,5hp cylinder for his Honda mt5. and guess. he drives it like nothing. he knows that he should break it in but he doesnt Care. and on the piston small Pieces have broken off. but it runs. he took the exthuast off just too see if any damage had happen. and yes it had, saw it today. if u have any social media i can show you
cool bike, people dont like the exhaust but i kinda do. The only thing wrong with this video is the engine braking and not breaking in the cylinder and piston
Parabéns pelo trabalho, sou de alcácer do sal e por cá também gostamos muito de dts e afins, no meu caso tenho uma dérbi já é a segunda e tem italkit 86cc c45mm e brk 30mm, também ficam motas daquelas "sem paciência" como deves saber, continua a fazer vídeos com material do aço que qualquer dia é só aspiradores elétricos :)... mais uma vez parabéns pelo 2t forever
this was pretty cool vid and stuff but u guys really should pull the clutch in and stop engine braking like they built such a cool bike and can't even ride a 2-stroke :^/
What did you have to rebuild to make the engine fit? There's someone on facebook that claims you just built a support for the bottom part of the engine and the engine mount that connects to the swing just bolts on
i ride a 4 stroke and i engine brake all the time since the brakes does it too hard... now, do you always have to use the breaks while riding a 2 stroke? seems stressfull to always think about that when riding?
Engine brake ist pretty bad for a 2 stroke, because iff you're giving no gas the engine is not lubricated enough and that's the problem. A 2 stroke has the extra oil in the gas and the oil is there to lubricate the engine. So iff u are slamming the brake you shouldn't go off the throttle. After a year off 2 stroke riding I must say it's not hard because you're doing it even iff ure not realizing so not a big prob I guess.
@@str3ke537 engine braking on a 2 stroke isnt as bad as everyone says, engine still has gas inside the crankcase lubricating the engine and still getting gas, otherwise it would be like you just switched of your ignition
Hi man, nice video! I just got a 2005 dt50, but it does not rev up high in 4th, 5th and 6th gear. It got a 50cc cilinder and LeoVince exhoust. 17,5 mm carbarator. Do you have any suggestions?
hi even I would like to make a similar modification on a beta in your opinion is better engine of the yhamha yz 85 or kawasaki 85 honda 85 suzuki 85 or ktm 85?
Boas, tenho uma Ktm 200 sx ela está com a transmissão de origem 14/45 acho eu (já teve cremalheira maior) mas mesmo assim esgota muito rápido só dá +/- 90 sabes o que é que pudera estar mal? Como já vi que percebes da coisa resolvi perguntar sou novo nisto xD
Didnt find any plastics. Well there was an option for 150$ but that was too much for me because I would only need 2 plastics not everything, just ask someone from motorcycle parts shop near you
at the place where i asked, they said they would need to import it from other country of course, they didnt give me a link or anything, cause i would just buy directly from them then :D try to contact other scooter parts shops
2:00 Now that's how you break in the new piston and cylinder
@NoNoNoNii why?
@@nathaniel.h7124 u dont need to brake in motocross bikes
@@arttuwallari3565 i had a motocross bike and i had to break it in 1 fuel tank from full to empty break in time
@@arttuwallari3565 Kai ymmärrät et crossipyörätki sisäänajetaan.
@@Robss6969 nii niitä lämitetää ekat 15min jq sit anetaa ja jäähtyy ja sit taas lämitetää ja vittusti leipää
Engine braking... Im dissapointed you built this beast but can't drive a 2 stroke :D
stop bitching... 2 strokes wont blow up because of engine brake, they blow up because idiots cant mix oil or tune carb
Well ofc they wont blow up but it causes extreme stress to the parts because oil is coming at the same time as gas and when you engine break it revs and there is no oil. And thats just not how you ride a 2 stroke
45465 4654645 2strokes blowup from engine braking dumbass
Sekuli can you explain engine breakingnto me
Sekuli can u tell which part was engine braking
This guy knows how to tune these little yammy strokers 💯🤟
You build it like a pro but cant ride a 2stroke
Vqle - Minecraft says minecraft player...
Tehomopoo joka ei väännä alhaalta kuuluu ajaa tollee ni on kokoaja piikillä kiekat
Vqle what are you talking about
lac cila moottorijarrutusta tää jätkä tarkotti...
Getaway Osmo nosiis oha tos moottorijarruuki mut pysyy sentää veto päällä ku ei turhaa kytkintä rasita :D
have you ever heard of breaking in an engine and warming it up?
jonnyontwowheels lel.. lol im crying. CAUSE OF YOUR DUMB COMMENT
Jonas Fridlund how is that dumb,that is what you should do when you get a new piston etc.
i know but i meant that dude who builded it knows that. hard to explain lol
Jonas Fridlund well if he knows that and doesn't do it then he is kinda dumb,a 112cc piston probably cost quite much
FinKillerZ pelailee yup. like my friend. got a 5,5hp cylinder for his Honda mt5. and guess. he drives it like nothing. he knows that he should break it in but he doesnt Care. and on the piston small Pieces have broken off. but it runs. he took the exthuast off just too see if any damage had happen. and yes it had, saw it today. if u have any social media i can show you
isnt that bad as a first start, to rev such high rpm even when its a nikacil cylinder? What A Beast!
NO problem , end explode i put a new one
BARacing you crazy 😂😝
@@BartPaashaas daddys money
@@aslakholappa3873 he is not a child bruh..
@@aslakholappa3873 he owns a whole shop how is it daddy's money
Grande pastilha ! Sim senhora ! Bons videos e bom canal .
Baaaaaaa p Racing ;)
did you run it in bed the rings? did you warm it up or just rip it? R.I.P to that bike its a shame
1:44 look at the footbar when he twists the throttle xD
yes :)
nice VIBES ;-D
è il 50 più illegale che io abbia mai visto ahahah spettacolo puro
cool bike, people dont like the exhaust but i kinda do. The only thing wrong with this video is the engine braking and not breaking in the cylinder and piston
Parabéns pelo trabalho, sou de alcácer do sal e por cá também gostamos muito de dts e afins, no meu caso tenho uma dérbi já é a segunda e tem italkit 86cc c45mm e brk 30mm, também ficam motas daquelas "sem paciência" como deves saber, continua a fazer vídeos com material do aço que qualquer dia é só aspiradores elétricos :)... mais uma vez parabéns pelo 2t forever
Those 85 cc engines are sick. (O.o)
Super cool moped i love the sound and how this beast is driving
this was pretty cool vid and stuff but u guys really should pull the clutch in and stop engine braking like they built such a cool bike and can't even ride a 2-stroke :^/
No Problem
It’s a dirt bike u don’t need to pull in the clutch
0:20 Sounds like GTA:SanAndreas sanchez. LOL
:DD
Idzie jak wsciekła :D
Did you have to make brackets or did it just slot in ?
What did you have to rebuild to make the engine fit? There's someone on facebook that claims you just built a support for the bottom part of the engine and the engine mount that connects to the swing just bolts on
The best 2 stroke YAMAHA!
Ei oo fygyst kii
Lerppanokka 482 sanot sinä
Lerppanokka 482 oi
Lerppanokka 482 kyllä
No ei tosiaa, silti jarruttaa moottorijarrulla :'D
i don't like 2 stroke but this swap is amazing !!
2-stroke bikes really like engine breaking, especially on the first rides
se my videos i do this alot
the 85ccm engine fits in the dt or did so some adjustments
need some ajust
That’s not a motorcycles... that’s a fuc*ing monster😍😍
where did you buy the plastics, clutchcover, steering, clutch handle, rims, and everything other parts that wasnt to the engine,
i sold
was the yz front fork a straight swap? im thinking the same forks
no you have to change
Gostava de tirar uma dúvida o que acham da DT x a 85cc ? E se é uma mota que dá muita barraca ?
Very nice dude !! 😳🙊🚀⚡️
got aprilla rxs 50cc engine swap nsr 125cc 180cc kit on should be mental when finished
Nice engine goes like crazy :)
yes crazy bike
Do you maintrnance it like a motocross bike? Oil changes in every 5 hrs etc?
nop is normal
i ride a 4 stroke and i engine brake all the time since the brakes does it too hard... now, do you always have to use the breaks while riding a 2 stroke? seems stressfull to always think about that when riding?
Engine brake ist pretty bad for a 2 stroke, because iff you're giving no gas the engine is not lubricated enough and that's the problem. A 2 stroke has the extra oil in the gas and the oil is there to lubricate the engine. So iff u are slamming the brake you shouldn't go off the throttle. After a year off 2 stroke riding I must say it's not hard because you're doing it even iff ure not realizing so not a big prob I guess.
@@str3ke537 ahh, gotcha
@@str3ke537 engine braking on a 2 stroke isnt as bad as everyone says, engine still has gas inside the crankcase lubricating the engine and still getting gas, otherwise it would be like you just switched of your ignition
Did you have to modify to install the forks?
Nice video, where did you purchase the Excel rims,discs and hubs?
in Portugal
@@BARacing in a shop or online?
Nice engine braking
Hi man, nice video! I just got a 2005 dt50, but it does not rev up high in 4th, 5th and 6th gear. It got a 50cc cilinder and LeoVince exhoust. 17,5 mm carbarator. Do you have any suggestions?
to the stock engine you have a lot of material
1. ekalla käynnistyksellä vitullista huudatamista 2. ei puhunu mitään sisäänajosta 3. ei kytkintä jarruttaessa....
how modificed the frame of the dt to fix the yz engine in?sry for my bad englisch
Qual é a config da cremalheira? Atualmente tenho a minha a 70cc e ta com 13x53
Nice project. I'd like to see you do this with an Aprilia RS50; great bike, but so under powered.
Muito fixe!!!! Projeto 5*
Só uma curiosidade? Andas com a mota na estrada? Matrícula?
boas a moto esta toda legal ....
Did you have to shave the cases
no
Is it possible to put an yz 250 engine in a Yamaha dt
Yes if you have a welder.
exellent project! good sound!
Why did bro rebuild the bike just to destroy it right after?
Nice one :O
Obrigodo
did you have to modify the frame to install the yz 85 motor
yes , I made some new supports for the engine
When you do wheelies i think you are very happy :D
Impressionnant
Incroyable combien de hp ?
arround 32 cv
@@BARacing to engine or wheel?
She’s looking so nice😍
Sim senhor. Ta ai uma coisa muito engraçada. Muito dinheiro ai investido tambem 😸😸
Muito bom seus vídeos vc é de Portugal ?
How well did the engine fit?
some modifications
Do you still own it and you would you sell it?
this thread is pure gold
thank you
how much work was it to mound the front fork ?
where did you buy the plastics
dream bike but what would something like this cost? (without the yz 85 engine)
Bas Manders around €800
looks way more expensive
In that condition like 1200€
where have you got the big bore kit from cause i want one for my kx85
this athena kit
a link would be nics if it makes no circumstances cause im looking no for a about 3hours and cant find it
there is someone who likes the revlimiter:D
:)
Were did you get the seat cover
how did you match the speedometer with the usd and 320mm brake disk?
yes
Boas em custos quanto é q deve ser pra fazer um projecto assim .
Tava a pensar em comprar uma e mandar fazer
boas manda pm pois este projecto possivelmente esta a venda
@@BARacing para o instagram do BARacing?
@@diogoascensao7670 manda para onde perferires
@@diogoascensao7670 facebook intragram
hi even I would like to make a similar modification on a beta in your opinion is better engine of the yhamha yz 85 or kawasaki 85 honda 85 suzuki 85 or ktm 85?
Massimo Facchini i like kx 85 engine most.
where did you buy the decals from?
What wheels are those and what hub are thouse
From which brand was the first light mask on the bike?
in stock bike ?
você é de Portugal?
sim sou ....
que bacana, gostei muito do seu canal!
ganda bagaço Zé sim senhor sempre em alltas
Holly shit, best thing i have seen :D
Boas, tenho uma Ktm 200 sx ela está com a transmissão de origem 14/45 acho eu (já teve cremalheira maior) mas mesmo assim esgota muito rápido só dá +/- 90 sabes o que é que pudera estar mal? Como já vi que percebes da coisa resolvi perguntar sou novo nisto xD
tens algo muito grave nisso se so der 90 tens que levar ao mecanico
ciao bella moto ma dove hai preso i cerchioni
Cops: Pull you over, see you doing that
You: It's completely stock 50cc
what is the top speed and how big is the fuel tank and his consumption?
Want to know too
jurcek 000 i bet that the top speed is 150-180 kmh and the fuel tank should be 6-7 L
and fuel consumption
jurcek 000 probably between 8-15l per 100km and top speed i guess between 120-150 km/h
its has a tank of 6.5L I dont know his consuptions but I have to refuel every week, I have a 80cc he probably spends more
Does the lights work if so how did you do it
use a batery
@@BARacing how long did it last
Szép bejáratas
Isso anda bem mas também parece ser muito segura
Bom Video ;)
I wish my dt had that much torque😂
put a yz engine
BARacing how i can buy one cant find one :(
You cant find a YZ engine? Or the parts?
@@BARacing is it difficult
Did you have to modify the frame?!?!?!
to fit engine
Nice :D more videos :3
very impressed!
Boas ganda projecto, parabéns, qual é o nome da mica?
hallo da polisport
That things a monster
Love your Gloves
Where did you get the plastics kit from?
im wondering the same and the rims to let me know if youve found it
Didnt find any plastics. Well there was an option for 150$ but that was too much for me because I would only need 2 plastics not everything, just ask someone from motorcycle parts shop near you
@@adomasstudio7705 i live in iceland and i work at a motorcycle shop and no plastics here can u link 150 ones
at the place where i asked, they said they would need to import it from other country of course, they didnt give me a link or anything, cause i would just buy directly from them then :D try to contact other scooter parts shops
@@adomasstudio7705 ok thx tho
how much needle mod dt engine kkiinnikeitä näyttä että etu kiinnikeet is originals
I definitly need a project bike
nice
Whats wrong with old rims
down shift with 2stroke😂 ohh how often u had to change the piston or the whole cylinder
i like drive
how did you change the electrical system?
hi have a pvl egniction
BARacing ok thank you so much
se in my facebook
yz 85 engine 1/1 goes in am6 in place? :)
music should be turned off while driving. want to hear that 125 sound
where did you bought plastic kit?
original in yamaha ;)
mais videos.!! da laranjinha dt lc tambem.. Essa sim
Damn that power😍
:)
How did you mod on the 320mm disc?
And what bike is the disc originally for?
guys engine braking wont do shit to your engine in short periods of course if you engine brake for a couple of kilometers something maybe would happen
Acham que um motor de dtr 125 servia para um dt50x?
Sim dá
BARacing E é necessario mais algumas peças?
Que animal de moto😎
Muito fixe :)