I have the 23'and had the 32 Glock. They do hold what the capacity states. They go through a break in period. My 30s was the same. The 23 gen 5 was the hardest to break in. The spring tolerance are very tight. It will hold all rounds that are listed. Load them up and let it sit. I thought the same thing but it's the tight springs in the mags.
You do kno the cable locks are for the guns right..? Not to lock the box lol. The cable goes down threw the ejection port & all the way down threw the end of the grip with your magazines out. So the gun cant be loaded with mags & cant be chambered to be shot. Nice G32
Ion think you can swap barrels for the gen 4 g32 to the g23 gen 5. Yeah it might look like the 32 barrel will fit but it would be too loose since the g23 has a bigger and thicker slide
Does it work reliably for you?? I have plenty of the 22 round mags for the 40sw....I changed the followers from 40sw to 357sig followers for added reliability for carry purposes
Ok my man, you have a lot of homework to do. I'm not going to go over it with you but trust me. You earned yourself a D on this video. It was almost an F but you did clear the chamber for safety. ( It should of been cleared before the video) I'd advise to not even keep a loaded magazine (not clip) on the table with your guns. Safety first always. Good luck and keep pushing forward to that A+.
First of all the reason ur guns are not holding 13 is because u trying to softly put the magazine in u have to slam it in smack it like a man and gen 5 parts can’t be swapped with gen 4 parts besides the magazine and you can not shoot a .357 sig out of a .40 barrel
Trust bruh that gen 5 will show scratches eventually. I got my gen 5 .40 in 2020 and lemme tell you, after a while in and out of holster the scratches will show.
I have the 23'and had the 32 Glock. They do hold what the capacity states. They go through a break in period. My 30s was the same. The 23 gen 5 was the hardest to break in. The spring tolerance are very tight. It will hold all rounds that are listed. Load them up and let it sit. I thought the same thing but it's the tight springs in the mags.
Love my Glock 32🔥🔥
Love all three of those guns.
Yep, I have all three and like them all too
They're pretty much all the same cal 10mm and the 23 is a cut down 10mm n the 32 has the same cut down as 40 cal with 9mm top
You can shoot 40cal out of the g20
Yup, I forgot to mention that
@@UncleTony777 you could shoot 357 sig out of the Glock 20 with a conversion barrel from “ Long Wolf”
You do kno the cable locks are for the guns right..? Not to lock the box lol. The cable goes down threw the ejection port & all the way down threw the end of the grip with your magazines out. So the gun cant be loaded with mags & cant be chambered to be shot. Nice G32
You can NOT use a Gen 4 barrel in a Gen 5...and you best not shoot a 357sig through a 40sw barrel...big no no!
The serations on the front is so you can press check instead of having to use the back serations all the time
The mag's are interchangeable for the G23 & G32🙂🤙
Bro you did not just say you bought a switch and show it too. Come on bro be Smart all it take is for Someone report this video WTF yo.
I'm glad u said it cuz soon as he said & showed the switch I came to the comments 🤦🏾♂️😂
Ong😂😂😂
Reals shit goofy lol
Whats the name of the extended baseplate for the .357?
My bad. You said it.
Got it from Milspin.com idk the name
Ion think you can swap barrels for the gen 4 g32 to the g23 gen 5. Yeah it might look like the 32 barrel will fit but it would be too loose since the g23 has a bigger and thicker slide
Yea I meant the Gen 4s 23 and 32 are interchangeable
Love that 357sig it's a Man Stopper 💯💯💯💥💥🤘👍
Glock 32 can also take the 22 round Glock 40 mag
Does it work reliably for you?? I have plenty of the 22 round mags for the 40sw....I changed the followers from 40sw to 357sig followers for added reliability for carry purposes
@@kevinrichardson8859 it really does probably got 250 to 300 rounds through it no issues
@@scottiepippen3855 👍
What kind of mag on ur 32?
Extended 5+ magazine from Milspin.com
What’s the mag extension on the 32 mag
Milspin.com 5+ magazine extension plate. The one for the G23 fits the G32.
Started with a 19. Traded my 19 for a 23. Now I’m looking into the 20. Gonna keep my 23. Somehow didn’t know the 32 was a thing. I want both😂😂😂
You can buy a 9mm conversion barrel for the 23 making it a 19 and you can also get a 357 barrel for the 23 making it a 32
Carry in a holster and not your waist band and you won't scratch it as much
A bottom for the 20? My wrist hurt 😂
Clips??? And different caliber rounds laying around... nuff said.
Ok my man, you have a lot of homework to do. I'm not going to go over it with you but trust me. You earned yourself a D on this video. It was almost an F but you did clear the chamber for safety. ( It should of been cleared before the video)
I'd advise to not even keep a loaded magazine (not clip) on the table with your guns.
Safety first always.
Good luck and keep pushing forward to that A+.
Bro you crazy saying you bought a switch lol
Yea im still free too!
Hahaha the Lock is for the gun homie not the case lol.
First of all the reason ur guns are not holding 13 is because u trying to softly put the magazine in u have to slam it in smack it like a man and gen 5 parts can’t be swapped with gen 4 parts besides the magazine and you can not shoot a .357 sig out of a .40 barrel
It’s supposed to be tight
Switch 👀😂😂😂 atf going b on ur ass boi 😂 n den u going say ur name as I’m typing 😂
Looks like the same thing
Does this guy have any idea about firearms and safety?
Nope and im still alive
Why do black!! People always feel the need to chamber a round in there gun all the time even in their own house and even during video review 😡😡
Trust bruh that gen 5 will show scratches eventually. I got my gen 5 .40 in 2020 and lemme tell you, after a while in and out of holster the scratches will show.
Do you use leather holsters? I found they don't scratch like non leather holsters.