kalau didukung dengan alat yang lengkap & memadai pasti akan punya pikiran inisiatif & kreatif Di tambah ada modal untuk pembelian material 😃 Mks atas informasi nya sangar bermanfaat buat saya
He lives where he cannot buy these tools or hasn't the money to buy them so he shows how to make tools from broken tools or scrap metal for little or no cost. Thank you.
Great idea, No 1. If I would modify it, I'd use a section of angle for the top clamp. More rigid than the plate, which deforms under pressure. But definitely inventive, and a great idea for later. Thanks for posting.
I'm glad I live where $1.99 still allows me to buy a 12 to 16 inch clamp. P.S. Thanks for adding the music. It reminds me to never click this again. LoL But good luck,and a great 2020 to you all the same. Greetings from E. Tennessee U.S.A.
Always fast forward to the end of these type videos, and determine what's been made---how it works and what it does. If you don't like your little preview, don't waste any more time.
)) а ведь бывает так что электрод намертво залипнет , ну там вовремя его под угол не согнул и вот он начинает раскаяться , и допустим ты в трудно доступном месте на лестнице , и до кнопки ВЫКЛ не достать )))) думаю что прищепка всеже удобней , и с ней быстрее сменить электрод
A C clamp, A Bench vice and A Welder ! You are aware that you can purchase all these tools (even cheap ones at Harbor Freight) in less than 2 minutes of the 10 you just waisted of my life I'll never be able to get back! Thanks!
the genius is in the making not the end product ...... i'm sure he knows he can buy all that stuff(he already has some of it) . the effort and design is the great part of it
Lol 5-10 dollars you said but imagine yourself stuck in a country were you gotta think amd make your own tools, and your the villages hero with a simple tool.......who is the idiot now? Shut the hell up and open your mind and let people be creative
@@e2910 you're so fucking dumb dude. Naive AF. Sure he's got all these specialized tools, taps, cutters, power tools, but can't get a $5 clamp. Really dumb fuck. Fucking dumbass.
Woww the amazing idea 😍😍😍
Thank you
@@MrToolJunction you're welcome
Waw so nice video
Very good
Good idea
Very nice idea
Bahut bdhiya good luck 3
What GENIUS ideas exactly?!
You just wasted people time apart from yours
🤣🤣
Very good ideas
Good info..
Thanks
I normally don't comment on videos that I haven't watched, but 30 seconds in and I just can't take the music.
I'm sure it's royalty-free music. You get what you don't pay for.
@@senorashish no music= best experience
Super.
mình không biết nói gì hon bạn Là người đã từng có kinh nghiệm và sáng tạo mới thật sự là trên cả tuyệt vời chúc bạn thành công có nhiều sáng kiến hay
Мне очень нравится картина человек под дождём. Молодец красавица!
kalau didukung dengan alat yang lengkap & memadai pasti akan punya pikiran inisiatif & kreatif
Di tambah ada modal untuk pembelian material 😃
Mks atas informasi nya sangar bermanfaat buat saya
Super
Thank you
He lives where he cannot buy these tools or hasn't the money to buy them so he shows how to make tools from broken tools or scrap metal for little or no cost. Thank you.
Bien video
very nice
Excelente idea muy útiles...gracias
Super boss
Great
Thank you bro
Que bárbaro es admirable su habilidad le felicito quice ver el tutorial por curiosidad, que bonito ver que disfruta el don que Dios le dio.
Nice
Great idea, No 1.
If I would modify it, I'd use a section of angle for the top clamp.
More rigid than the plate, which deforms under pressure.
But definitely inventive, and a great idea for later.
Thanks for posting.
Hola buen imbento gracias por enseñarme sus abilidades.
I always learn something when I watch a video like this. In this case it is to not click on anything from Mr Tool Junction ever again.
Sencillamente genial. Muchas gracias y un cordial saludo desde Argentina.
What the hell was made and for whatever purpose was it made for?
paul P thank u!!
Not the thing in the thumbnail. I really wanted to know what that was for and if you could just use a t-strap hinge to accomplish the same goal.
Good very नाइस video
Excelente thanks a lot for sharing.
Good
Awsome!!! The comments had me laughing my arse off. !!! Glad I came !!
6 hours and $70 worth of metal and parts later.... Viola! A clamp that I could have purchased cheaper and with far less effort.
Amilatiwanka
Super brother
Thank u
Great Ideas
I think using “genius” in the title is being a bit generous? Maybe , “useful inventions”
For genius inventions please reference Nikola Tesla!
he should have used the words cool or clever...genius was kind of click bait tee...
First show what is the end product and later show how to make that. Viewers can decide whether to watch entire crap or quit in between.
All are good ...waldin holder is so good
Super bro
Great we all have all that tools at home
Acchi karigari aapki hai
Dhanyawad bhai
people like you led the industrial revolution in this country. damn good work and ideas
Thanks TH-cam algorithm... (what am I doing wrong?)
I'm glad I live where $1.99 still allows me to buy a 12 to 16 inch clamp.
P.S. Thanks for adding the music. It reminds me to never click this again. LoL
But good luck,and a great 2020 to you all the same.
Greetings from E. Tennessee U.S.A.
Ya, a 2 buck clamp for a one time use. Wally World special. Don't forget time ,gas,socializing and coffee both ways on ride cost like hell
Its really genius to buy £2000 worth of power tools to make a £2 G-Clamp.
He i am englandanian pleas you make a plass
People just playing around with lots of their expensive tools. It's just for fun, they do not think about money.
⁶
@@kietnguyen9884 what 6?
Top top top.. 👍🏼
This isn’t a half bad idea ! Very Cleaver !
Merci pour cette vidéo des idées génial bon courage ,merci encore
Verry nicety.frome.Thailand
Drill check hack is really super
Loved the first idea.
Super sounds
Genius 👍👍👍👍👍👍👍
Top
Grandes consejos y enseñanzas!!
Wonderful last one ya
Very helpful
Genius is not a word I would use for this
Upside down genius?
Could watch this all-day long
Great idea wow
I like the third one
nice ideas
Ótimo trabalho
Ótimo vídeo
Que Deus te ilumine sempre
WoW, outstanding! Very creative and useful stuff.
ÓTIMO , PARABÉNS ! BRASIL
I like it! Scraps laying around shop...why not make it...
Zaberdast
Thanks bro
Hey mister tool junction, ya know a skilsaw works way better than a drill. You could have just mounted it upside down.
Always fast forward to the end of these type videos, and determine what's been made---how it works and what it does. If you don't like your little preview, don't waste any more time.
Nice great idea
I know, I know. I'm the one that clicked and then proceeded to watch the whole thing. I'm still angry though.
Cool shorts man
Buen ingenio!
Desi Jugaad👍🏼
HN BHAI
)) а ведь бывает так что электрод намертво залипнет , ну там вовремя его под угол не согнул и вот он начинает раскаяться , и допустим ты в трудно доступном месте на лестнице , и до кнопки ВЫКЛ не достать )))) думаю что прищепка всеже удобней , и с ней быстрее сменить электрод
Yes.. i many parts of the world you can't just drive to buy these type of tools very cheap at you local harborfreight store..good job man!
OH WOW that was absolutely a GENIUS way to waste time!
I like only number 3
amazed how much scrap material this guys has among all the expensive tools he owns..
A C clamp, A Bench vice and A Welder ! You are aware that you can purchase all these tools (even cheap ones at Harbor Freight) in less than 2 minutes of the 10 you just waisted of my life I'll never be able to get back! Thanks!
Wow....cool....👍👍
π..νν
Wow
Вместо гайки,барашек , чтоб гаечный ключик неиспользовать
👍👍👍
the genius is in the making not the end product ...... i'm sure he knows he can buy all that stuff(he already has some of it) . the effort and design is the great part of it
Exactly!! he's not claiming to have invented the wheel; but the Debby Downers can't leave it alone
Arc welding super
Amazing... 👍
What an amazing waste of time! 🤦♂️
I think you mean "genius" waste of time.
I dont think so he is making money 5m views bro
not bad, but also not genius. may be useful for many peoples / worker where labour making hand made product
Not bad - really like the homemade box/pan brake and homemade clamp cool too. Good job
Eyemalmostthere...YOU ARE AN IDIOT.
1st one was kinda cool.
2nd was ALOT of work for a $5-10 clamp.
3rd was just dangerous.
Lol 5-10 dollars you said but imagine yourself stuck in a country were you gotta think amd make your own tools, and your the villages hero with a simple tool.......who is the idiot now? Shut the hell up and open your mind and let people be creative
Elias Lara where did he get the tap set and all the power tools dummy?!
@@apllDgrapllD lmao
@@e2910 you're so fucking dumb dude. Naive AF. Sure he's got all these specialized tools, taps, cutters, power tools, but can't get a $5 clamp. Really dumb fuck. Fucking dumbass.
Wow what great ideas . Those tools didn't exist before. Wait I think they did.
Interesting but maybe skip the video of the actual welding?
Somebody owes me 10 minutes of my life back please
Ned Read you wasted your time as there is a red dot on my video that I just slide along and stop at the good bits.
Wow, your in debt.
nic
I like the tool for bending metal! Great idea and something i can use in mu shop too! Thanks for the inspiration!
Thanks bro
@@MrToolJunction rrytygccvg56890
@@MrToolJunction ddr6
@@MrToolJunction ttt44trgpp
Genial, gracias por compartir. Saludos desde Cali, Colombia.
Good ideas
En el primero puedes usar bloqueadores de bicleta y te evitas estar apretando tornillos
Guessing there's no hardware store where this guy lives - but interesting video though , except #3 , danger level went straight up !