Can confirm. I've just completed this upgrade on my 95 crown Vic. It works great! Light trailer towing, heavy groceries or extra passengers are no longer a problem. Thanks for the recommendation! Great vid!
Tape the insulators on. I air Bag my 2000 GM as the sway bar rubbed on the Explorer IRS cover drain bolt when fully loaded. Soft or firm ride with air adjustment.
I assume i can do this to my 2005 vic? I do a lot of city driving and recently it's become super bouncy I mean like wtf stop. Think my shocks may have broken off lol I get like a 6 time bounce when on the highway it is annoying
I have a 2000 Lincoln Town car, with the springs in the rear brginning to sag. Do you have any idea if the springs from the 2003 Crown Victoria Police Interceptor would be compatible with my vehicle? I am hoping that they may be compatible, because I was planning to have the coils replaced soon, and this would be a nice upgrade.
@@jontaylove25 can i see your car ? I have got 2005 and it was for commercial (P72) and i dont know what the springs are but i dont think it looks higher than the other police crown vic ( im talking about the rear springs)
I welded the wrench under a bar with a ratchet wrenches I sacrifice one of my ratchet wrenches I kind of cried but it made a good tool to get that shock nut off the top of that mercury
Can confirm. I've just completed this upgrade on my 95 crown Vic. It works great! Light trailer towing, heavy groceries or extra passengers are no longer a problem. Thanks for the recommendation! Great vid!
Looks like a challenge when you do it on the ground. Those shocks looked hard. Your video is great. Thanks for showing us.
It was a pain for sure.
@@JackofAllMasterofNone Question - Would installing springs from an F150 pick up raise the car higher? Thanks again
Thanks for making this video, I'm going to be doing exactly this on my wife's crown vic today
Nice video and thanks for the shock removal tip never thought of that thanks again.
Thanks, I plan to change my shocks on my 2001 Grand marque. Might do the springs too!
Thanks for this video. I'm interested in knowing more about that new dual exhaust. Did that car have factory duals or did you upgrade from single?
Upgraded from single to dual using Walker components.
Tape the insulators on. I air Bag my 2000 GM as the sway bar rubbed on the Explorer IRS cover drain bolt when fully loaded. Soft or firm ride with air adjustment.
I cut an access hole in the trunk for each shock then covered them up with metal tape.
I thought about it but wasn't sure exactly where to cut and didn't want to destroy stuff.
@@JackofAllMasterofNonedo you know where now?
i just put air shocks on my p73 fixed the problem
Hey what parts did you use? I want to do the same thing to my grand marquis
The heavy duty coil springs have been discontinued where can i find a direct replacement?
I assume i can do this to my 2005 vic? I do a lot of city driving and recently it's become super bouncy I mean like wtf stop. Think my shocks may have broken off lol I get like a 6 time bounce when on the highway it is annoying
Would it be worth doing the fronts as well?
hi thank sfor the video. do you know if the parts you used are the same for a 2008 mercury grand marquis? thank you!
The springs are but the shocks are not. In 2006, they completely redesigned the suspension front and rear. Outboard shocks and a much better ride.
@@JackofAllMasterofNone thank you! I need to replace the shocks on all four corners
I have a 2000 Lincoln Town car, with the springs in the rear brginning to sag. Do you have any idea if the springs from the 2003 Crown Victoria Police Interceptor would be compatible with my vehicle?
I am hoping that they may be compatible, because I was planning to have the coils replaced soon, and this would be a nice upgrade.
Yes, they will work!
Very helpful thank you
Those models were an absolute pita because of the top shock nut location. The later models were finally relocated for easier access thankfully.
Yeah. It wasn't an easy job.
My 2001 civilian model I changed my rear springs and shocks to police interceptor parts
Does it look higher now??
@@thesaudischolar274 not to me
@@jontaylove25 can i see your car ? I have got 2005 and it was for commercial (P72) and i dont know what the springs are but i dont think it looks higher than the other police crown vic ( im talking about the rear springs)
I’m going to do watts link have you a video on that ?
I welded the wrench under a bar with a ratchet wrenches I sacrifice one of my ratchet wrenches I kind of cried but it made a good tool to get that shock nut off the top of that mercury
I’m bout to replace rear shocks on a 89 Lincoln towncar but they seized
How much does this change the ride quality? Would it be noticeable on a 2003 with 254k miles on it?
Stiffens it up nicely in a good way
Will this work on the 2000 Grand Marquis? Any.upgrades to the front? Thank you for the vid.
Yes it's the same thing on the Grand Marquis. I didn't do any front upgrades
Those will fit my 05 Grand marquis too right?
8:33 that's what she said
Shame on you.
he said ir not meee:)
How long did it take you to do the rear springs on the crown vic
20 minutes
Can I replace the airbags with coil springs easily?
Yes. Just remove airbags and put coil springs in there place. Everything else is the same.
Where could I purchase this specific pair of springs online?
eBay is a good place. Or any online Ford dealer.
I found some on rock auto, Swedish steel cargo springs $63!
Make sure you get progressive winding
They are way more responsive than air, did my shocks and struts too
@@robertvilliard6768 is progressive better than variable?
How many tons are your jack stands rated for?
Where did you get that shiny new exhaust?
It was just a Walker parts store system
Does this work for the grand marquis as well?
Yes
isn't there a top and bottom coil spring isolator ?
It's suppose to be, lol. He left his out
My 2003 doesn't have any... But I'm putting some when I do the aprings
Yes, I wondered that
How much are the springs?
Depends. I got a good deal on eBay for around 100 for the pair. Gotta shop around.
Don't buy regular ones, the progressive springs give way better ride. Run $89 at O'Reilly
Do you need the rubber isolator on the springs?
I would. Worst case without it you could get some squeaks every now and then.
And theyre only on top ?
Did it help with the the bumpy ness of the ride
Not sure exactly what you mean. It firmed up the rear end. More sporty feeling if anything.
Grease all joints need gun its 52 bucks auto zone fix all noise for ya
Could I use the same setup with 06 grand Marquis
Yes
Wow
Hard to believe you used a sawzall for this job.
Wood this work on my 2001 grand marquis too
Yes
WOULD*** I'M 12 AND CAN SPELL, BETTER THAN YOU
glad mines an 03.....
Yeah. 2003 was a major design change and much better suspension
Do you nknow where motor mounts are located
On the sides of the engine. Near where the exhaust manifold go down
Can you use these springs on the 89?
I do not think so.