LED headlight bulbs Bevinsee A01 'easy fit' How to fit & review Peugeot 208 2015 L.E.D headlamp bulb

Reviewed and fitted Bevinsee LED headlamp bulbs A01 H7 Peugeot 208 Halogen vs LED headlight bulbs. Easy fit LED's tested on a Peugeot 208 2015 - 2016 model year.
Discount / coupon code: Darren10 will save an extra 10% off. Link below
www.bevinsee.c...
2022 A01 H7 LED SUPER BRIGHT 6000K IP68 WATERPROOF
Features:
【300% Brighter】Integrated 65W 13000LM CSP-3570 LED beads to deliver brighter light. With jaw-dropping 200m projecting distance, improve your response time and allow you to drive back home safe every day.
【Excellent Cooling】With 15000 RPM powerful & mute fan protected by a sculpted cover to prevent wiring from interfering with the operation of fan, sweep away the heat for longer service life. Built in solid aluminum construction, 300%+ faster in cooling speed.
【IP68 Waterproof】Highly resistant to any bad weather, such as heavy rain, snow and fog. You can rest assured in every minute.
【EMC Anti-interference】Built-in smart IC to resist electromagnetic interference to ensure current stable. Give you a pleasant relaxing time in the car.
Specifications:
Color Temperature:6000K Pure White
Wattage:80W/Pair
Brightness: 10000LM/Pair
Voltage:DC 11-30V
Current：2.5A
Operating Temperature: -40°C ~ +80°C
Waterproof Degree:IP67
Lifespan: 100,000 H
Start Up: 0.1s Illumination
Package Included:
2X H7 LED Headlight Bulbs
【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1.The headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2.The on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3.The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1, install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2, install the resistor, you need professional installation.
#ledlights
#led
#headlight
#Bevinsee
#halogen
#headlamp
#bulb
#xenon
#peugeot
#208
#upgrade
#garagetech
#review
#diy
#fitted
#tested
#6000k
#discount
#discountcode
#coupon
#couponcode

[@alfaromeo159]

Since you put back the rubber cover, how the led fan dissipated the heat to the surrounding?

[@trendliners9658]

The facelift Peugeot 208 (after 2015) has different H7 adaptors than the pre-facelift (2012-2015). So, for every aftermarket LED H7 bulbs, adaptors are needed. I don't think you mention that which is very important.

[@Epicvillev90]

I can't find much information online about this, are there any resources you can link me to so I can make sure I buy the right bits? :)

[@filmfreaken]

Glad i read your comment before buying, can you point me in the right direction, for a 2017 208.

[@filmfreaken]

@@Epicvillev90 have you found any? i need for my 2017

[@Epicvillev90]

@filmfreaken Unfortunately not no! My car is also in the shop atm so I haven't been able to check myself

[@Tobi_Schmobi]

For my 208 GT-Line from 2018 I don't need any adapter, just the bulbs and the LedCap09. At least with the Osram H7 night breaker Leds.

[@oRoamr]

how can you change the beams to leds?

[@kieran030694]

Hi there , I've tried certain led kits and they seem to run fault codes on my 2017 peugeot 208 . Did the customer of this vehicle ever come back and say they had engine lights or warning lights on?

[@GarageTechAutomotive]

These have been fine, you can get add on kits which prevents error codes, some LED kits come with them.

[@dhimokuqali7024]

Hi nice job
Where you are based please . If you can fit this to me to my Peugeot 208
Nice video

[@AdamKummrow5436]

Im thinking about getting some of these but are they ilegal and wont pass an mot?

[@kennyfahy4971]

Hi just saw my first video you done on "engine temperature sensors" I must say you done a very good job Ta .. I've a problem you may be able to help out with..
Everything works, on my vw t5 transporter 2005, but for the engine temp gauge inside the van.. it fluctuates up and down (0°c) until it reads about 80°c then its grand and sticks at 90°c after about 6km (4mls).. wondering is this a faulty sensor or shorting, this only started since changing the temperature valve as temp prior to change was hanging around 70-80°c with no fluctuations... regards Kenny....

[@GarageTechAutomotive]

Hey Kenny, thanks for the comment, the temp sensors on the early VWs were common for failing and are relatively cheap to replace. But if you’ve recently had some other work done on the cooling system, you could have an air lock in the system. I’d check your coolant level, run the engine up with the cap off for a while, that can help, when you rev the engine you should have coolant retuning to the bottle, that will indicate the water pump is working. Hope that gets things sorted.. 👍🏼

[@kennyfahy4971]

@@GarageTechAutomotive
Thanks very much for speedy reply I'll try out.. I'm retired lecturer of 40 years on the job mechanical engineering cad/cam.. I think you have serious potential as a teacher/lecturer but maybe you're happy with utube and I suppose lecturers etc probably soon will be a think of the past.. best of luck and keep up the good work...