I want to personally thank you for always listing the materials. It makes it so much easier for beginners as well as those who struggle with the correct ring size.
That looks really beautiful,,and so easy to do, I tryedvto do a chain Mali, putting a bead inside the jumprings,but the bead kept piping out, this looks nice and the seed beads can be mixed reds blues yellows so on,, and that's one thing that I have plenty of and jump rings,take care👍🌈🌹🌺🌹🌺🌈
If you make these often or if you remember do you know approximately how many rings with sead beads on them did you use so I know approximately how to make? Thank-you either way so very much as this is beautiful and I think I want to make this for my wife to wear. Have a lovely day!!! AMB.... Rose EDIT:: I love when you humm/sing while working, it just makes watching that much better hehehehe.
I have my rings. I reordered to get the right size. I am still confused as to which rings you put the 6 o beads on. The rings I ordered seem small compared to your video after I look at them.
So i have a question about sizes. Tou seem to use fractions/inches but as im not American all the rings i buy are in mm. So when converting the fraction to mm i always get a decimal point for example 3/16=4.71mm or 1/4=6.35mm. Rings are sold in whole numbers. How do i convert the fractions to the proper size? Do i round them all up? Down? To the closest whole number? I really appreciate any help you(or other viewers) can give!! Thank you!
Ok I have ordered and received all of the chain links. I have more 6 o beads than I can count. I have tried putting the beads on the 18 gauge 5/32 as per your instructions and they do not fit. I am very disappointed that I invested all this money in the chains and they don't work with this project.
Hey, Elaine! The rings I am using are American Wire Gauge: some chainmaille companies list their rings in Standard wire gauge, and I'm not sure what 20ga in AWG is in SWG. Maybe using a larger seed bead would be a way of utilizing the rings you have already purchased. Good luck to you!
I am very disappointed in your links in that they don't match what you used. I ordered the 18 gauge 3/16 based on your link and was sent 14 gauge 3/8. I can't use this for my jewelry. I can't even add the beads to this like you have because the links are too thick.
Hello, Cynthia! I'm so sorry this happened: this is an older video so the seller I linked to on amazon may have modified the listing. I will be sure to update my listing! You may want to contact amazon about returning the rings, that are usually pretty great about returns.
Yvonne Williams Thank you for getting back with me. I am finding a new use for the rings. I just finished a 2 x 2 bracelet and earrings. The size of the rings as a bracelet or necklace will be great, especially for men. I still need to find a seller that sells the rings you recommended for your project. Do you know where I can find them. I really want to make your project for Christmas Gifts.
I want to personally thank you for always listing the materials. It makes it so much easier for beginners as well as those who struggle with the correct ring size.
Had a bracelet and loved wearing it but couldn't remember how it went together so a big thank you
I love it, inspiring! makes me want to go out and buy some pieces to create pieces to match my felted wristbands!
Perfect again Yvonne l love this design. I am going to make one of these tomorrow thank you
I love watching your videos. Did you make your own jump rings or purchase them already made?
Hello, Gloria! We used to make our own rings, but now I shop for them from www.theringlord.com
Love this idea. I used her pattern to make a necklace from random sized jump rings I had stockpiled.
This would be a fun one to do while watching movies on the sofa! Love it!
This is awesomely gorgeous, a real 'I want this to enjoy the shaky beads' piece. I'll have to make it!
Love it. Simple and easy to follow. Thanks
That looks really beautiful,,and so easy to do, I tryedvto do a chain Mali, putting a bead inside the jumprings,but the bead kept piping out, this looks nice and the seed beads can be mixed reds blues yellows so on,, and that's one thing that I have plenty of and jump rings,take care👍🌈🌹🌺🌹🌺🌈
So beautiful!!!!! I love it😍
+1 for the clearance rack at Joann’s! 👍🏻 I got a bunch of good stuff there
lol, right?!
If you make these often or if you remember do you know approximately how many rings with sead beads on them did you use so I know approximately how to make? Thank-you either way so very much as this is beautiful and I think I want to make this for my wife to wear. Have a lovely day!!! AMB.... Rose
EDIT:: I love when you humm/sing while working, it just makes watching that much better hehehehe.
Are the rings aluminum? Do the rings discolor on skin? How do you avoid discoloring? I actually think I could do this without screwing it up...much.
Thank you
:-D
Where do you do your shows at.
lOVE IT....
I noticed in your video you said to string the beads on a 19 gauge 5/32. I can only assume you meant 18 because that was on your list of materials.
I have my rings. I reordered to get the right size. I am still confused as to which rings you put the 6 o beads on. The rings I ordered seem small compared to your video after I look at them.
love your videos
/
I would love to do this I'm a beginner
So i have a question about sizes. Tou seem to use fractions/inches but as im not American all the rings i buy are in mm. So when converting the fraction to mm i always get a decimal point for example 3/16=4.71mm or 1/4=6.35mm. Rings are sold in whole numbers. How do i convert the fractions to the proper size? Do i round them all up? Down? To the closest whole number? I really appreciate any help you(or other viewers) can give!! Thank you!
How long would you suggest making bracelets for inventory?
Hi Yvonne may I ask where you buy your jump rings from I'm finding it hard to get think jump rings
Ok I have ordered and received all of the chain links. I have more 6 o beads than I can count. I have tried putting the beads on the 18 gauge 5/32 as per your instructions and they do not fit. I am very disappointed that I invested all this money in the chains and they don't work with this project.
What size would I need in mm. I am in uk and I’m having trouble finding the equivalent sizes.
Why is it that your ring sizes in the video differ from the ones you suggest ordering?
did you say patrion (not sure of spelling) would love a link to this to follow and pledge love your style :))
Rider079 atherton Patreon
Rider079 atherton I believe it's listed under www.patreonyvonnewilliams
There should be a link to her patreon in the description box of all her videos.
What size rings do I actually need? I ordered the sizes listed, but the beads don't fit on them. Bummer.
Hey, Elaine! The rings I am using are American Wire Gauge: some chainmaille companies list their rings in Standard wire gauge, and I'm not sure what 20ga in AWG is in SWG. Maybe using a larger seed bead would be a way of utilizing the rings you have already purchased. Good luck to you!
❤️
I am very disappointed in your links in that they don't match what you used. I ordered the 18 gauge 3/16 based on your link and was sent 14 gauge 3/8. I can't use this for my jewelry. I can't even add the beads to this like you have because the links are too thick.
Hello, Cynthia! I'm so sorry this happened: this is an older video so the seller I linked to on amazon may have modified the listing. I will be sure to update my listing! You may want to contact amazon about returning the rings, that are usually pretty great about returns.
Yvonne Williams Thank you for getting back with me. I am finding a new use for the rings. I just finished a 2 x 2 bracelet and earrings. The size of the rings as a bracelet or necklace will be great, especially for men. I still need to find a seller that sells the rings you recommended for your project. Do you know where I can find them. I really want to make your project for Christmas Gifts.