Kinetic Liquor Cabinet: Full Build Series Ep.2
ฝัง
- เผยแพร่เมื่อ 15 ธ.ค. 2023
- Kinetic doors have always peaked my interest, the concept was created by Austrian artist Klemens Torggler. In this video I make a liquor cabinet out of Purple heart, and Walnut with brass accents. Drop a sub and let me know what you think of the final product in the comments. Thanks for watching, appreciate yuh!
Music by Creatormix.com
Animation courtesy of @CurtisBlank on Instagram
My socials:
Instagram- @yarmles
www.yarmles.com
![[Full Episode] Hell's Kitchen Thailand EP.14 | 12 พ.ค. 67](http://i.ytimg.com/vi/MNspIlqlJcc/mqdefault.jpg)
**Here are the final shots of it operating below, my bad***
th-cam.com/users/shortsls6hzeqoLU4?si=xm8hVqvoqc0K2R3V
th-cam.com/users/shortsasZP7Oh9YU8?si=-4_HUAt6r2B86MAJ
Still doesn't have an uninterrupted full shot of the door opening. I get the aesthetic you are going for here, and this is an amazing project, but the cuts are just too jumpy and close up for me to get a full appreciation of the work you are doing here. My personal preferences notwithstanding - fantastic craftsmanship.
Great video. I really wish we had a complete full shot of the door opening and closing. I feel like that is one of the biggest parts of your project and i really wanted to see it clearly. Otherwise super great
Check pinned comment to see it fully operating, thank you!
Both this and the Tambour build were great. One suggestion, that would help me get more value out the vids - focus more video time / explanation of the "mechanisms" (hinge angles, measurements, what makes it work...same w the tambour...sizing of the groove, how many slats, etc), and less on the banal milling, gluing, clamping, sanding tasks. Thanks for the high quality vids.
Thanks for the feedback, I will keep that in mind 🙏🏼 I do also agree with the milling glueing part being banal, it was just so much of the process on both of these builds. I started making videos 3 weeks ago so I am new and still learning haha. Appreciate yuh!
Very cool build. Any plans or can you say where you got them? Also, with exotic woods acetone them before glue ups. It helps remove oils and will yield better results.
@@patriotwoodworker6092 Appreciate it, and thanks for the tip. Theres quite a few videos of people making them on here that I watched years ago and then went to the shop and figured it out from memory. I haven’t made drawings of these ever unfortunately. The jist of it is the doors have to be the same size and both be squares. As long as you follow that you should be good to go. I am however going to make a condensed version of this video soon with alot of details on sizing and such.
It's so neat catching such a quality channel so early in its life! These builds are so unique and have already changed the way I look at projects. You and Pedulla Studios are quickly becoming some of my favorite woodworking content on TH-cam! If you are able to consistently pump out videos of this caliber, you stand a pretty good chance to make a decent chunk of change from here! Keep up the great work!
Man this means alot to me, Pedulla is one of if not my favorite woodworker currently. I really appreciate the kind words.
@Yarmles you can tell! The man is a wizard. We should all aspire to be that creative and talented.
Love the build, invest in a push stick for your table saw!!
Thank you! And I have a few, I definitely need to use them more.
Now that's a real woodworker amazing quality 👏.
Many thanks 🙏🏼
Greetings from South Africa 🇿🇦. What I think about this piece.............absolutely amazing 👌. I love the attention to detail, not the mention the choice of wood. Most importantly, the way this kinetic door works. It's just amazing. Keep up the good work 👍. Cheers.
Im baffled someone on another continent is enjoying my video haha, greetings and thanks for the love, it means alot 🍻
Seeing Redbreast in the first .5 seconds of the video definitely speaks highly of your respect for whisky, and thus the care you must have taken for the cabinet that holds it.
Drinking the cheap stuff makes you appreciate the finer stuff that much more 🤌🏻
This is some mastercraft stuff.
Far from a master but I am trying hah
Wow that's incredible. Fine craftsmanship 🤌
Very kind, thank you.
Is that flippin purple heart? That is my favorite wood and this is the first video of yours that I have watched.
Indeed it is! Big purple heart guy over here, my latest video has a decent amount of it in it too.
Could watch these all day! 💘
Very kind of you 🥃
Absolutely amazing it turned out beautiful great job. Can’t wait to see what you do next.
I got some ideas brewing, thanks for the support Jim!
This is the craziest and most awesome build I've seen in a while. Excellent innovative content.
Hey thanks, I am trying to keep it semi original haha
Amazing cabinet! That Red Breast 12 is amazing as well!
Appreciate that, the redbreast was my inspiration 🥃
dang I didn't know you could do panel glue ups with dijon mustard. THESE are the tips I come to TH-cam for
Pls don’t eat glue
Love the style, it’s fresh
Fancy craftsmanship!
Hey thank yuh 🥃
Amazing build! Love the editing on this.
Thank you, Im glad you enjoyed it!
Everything about this is amazing.
Thank you, appreciate it!
What a great build video. The asmr is beautiful
Thanks Jt
🤯🤯🤯This is some quality material man! We are all impressed by the skill you have. Keep it up homie! Can’t wait for the next build!
Cant beat the purple and brown combo, appreciate it bud!
You are watching a master at work 🔥🔥 So dope
Thanks for the animation man!
This is really quality work and also very impressed with the edit. ASMR! Can’t wait for the next video. ❤
I have a long way to go when it comes to editing but I appreciate that ❤
You’re definitely ahead of the game! I agree, the edits were really well done!
I appreciate that!🍻
Very nice build. I'm a fan of Purpleheart and I think this is the first project I've seen on TH-cam using it. +1 for the Redbreast 12 year!
I’ve seen a few, it’s a hard color to work with so I can see why. And thank you, I appreciate the kindness!
@@Yarmles A hard color and a hard wood. I used Purpleheart in a project about two years ago and let's just say I broke more boards than I used. But in the end the project was a success.
@@jeffreyjennings1640 what did you make?
That is a fantastic job. It looks great. For a minute I was thinking " what was that warning about, very few of us have a setup like this, Diamond Jim, and if we do we damn sure know how to use it" then I saw you make that bevel cut and was like " there it is" 😆
Appreciate the kind words, and we all take a risk here and there I am sure even if it’s not smart move, makes you feel alive!!
@@Yarmles oh, absolutely.
Love that door
It loves you too
Highest comment/like to view ratio I’ve ever seen nice job buddy
Imagine the possibilities if I actually knew what I was doing with a camera!
this is sooooo amazing. It makes me want to build one
Appreciate that, give it a shot!
The quality is magnificent
Someones been reading his thesaurus 📚
Well worth a sub your work is right up my alley have a safe New Year’s Eve
Thanks brad, appreciate the kindness
Love the door
Thank you Arron with 2 R’s
A nice cabinet, well built.
One comment though, putting a bottle of Jack Daniels next to a bottle of Readbreast is an insult towards the Irish whiskey.
Appreciate it, and no disrespect intended 🥃
Amazing 👏🏻
Thanks brother!
I need this! So sick
Your sobriety disagrees
Stunning work pal... New sub earned.
Welcome aboard 🍻
Music slaps nice...
Gj btw
Love me some lofi 🙏🏼
After I've seen the Tambour build this will definitely be the next project waiting in line. Absolut amazing! One question regarding the door. Is it absolutely necessary having the second magnet at the outside of the cabinet? Or only having magnets inside are not strong enough to hold the entire door in place?
Thanks a bunch, I appreciate the kind words! As far as the magnets go I used to use 6 but that was overpowered, I went down to 2 at one point and that wasn’t enough, 4 is just right considering there is a bit of leverage involved once the door is mounted and vertical.
Really cool. Is there a shot if it showing the full door while in motion that I missed?
Just pinned a comment with a short of it operating, my bad.
@@Yarmles awesome! It's like magic. Watched the short on loop quite a few times.
He’s a pro 👏🏼🫶🏻
High level amateur**
This was a beautiful build! You did an amazing job! I have one question, did you consider recessing the hinges or was that not an option because of how the door works?
Hey thank, I appreciate that. I’ve thought about it but the reveal between the top and bottom doors has to be there for them not to bind when opening and I think it looks better if all the reveals match personally.
That was fucking awesome
Means alot, thanks scott 🙏🏼
Cool 👑🤗❤️💥
Many thanks 🙏🏼
If nothing else I learned I need more clamps.
You have plenty, 50 or 60 more and you’ll have the perfect amount.
❤
What is that beautiful purple/pink wood?
It’s purple heart! I should probably put that in the title huh?
@@Yarmles , or the description. Nice eye-catching accent on the finished product. Looks great with the brass dowels.
Thanks, I had some left over from the last video figured why not use it here.
Does the SawStop work on gloved hands?! Those thick gloves might not be determined to be fleshy enough & confuse the SawStop!!
Idk honestly, I imagine it would still stop once it got through the glove.
I saw something similar to this as a full size door. But anything related to booze is better!
Amen 🥃
Nice build, but do you wear latex gloves while you sleep too??
It’s a full body suit actually
What is this sorcery?!
😅
So many efforts for Jack Daniel's ..? 🤨😂 Good job though
Very nice, any chance you could share the plans?
I do not have plans unfortunately, I make these from memory and I figured out how to make them by trial and error in the shop
I enjoyed the video. Really liked the kinetic doors and use of purple heart and walnut together. Two critiques though, it says episode 2 when it looks like it's a one-off episode. Little confusing and your commentary needs to be slightly bigger. Very small hard to read. Overall good video though
Appreciate the kind words, and noted about the letter sizing, I agree. Also, each episode is a new piece of furniture being built start to finish making this episode 2 of my Full Build series/playlist. Again thank you, appreciate it 🙏🏼
Cuáles son las medidas?
Good afternoon friend, your work is extremely wonderful, it's surreal, I'm a small artist, I love art, can you tell me the size of this closet please, I'm from Brazil, I don't speak English ok, I use the translator, thank you.

Appreciate the support Jose! The measurements on this one are 12”(wide) 24”(tall) 7”(deep). I usually go 4” more in height 2” more in width but made this one smaller for myself.
@@Yarmles thanks
Do you share your plans?
I don’t have plans written down unfortunately, just figured this out on the fly a while back and have been rolling with it ever since. Maybe one day I will get someone to make detailed drawings for others.
Dig the 70s porn music dude groovy man
Waaaaait a second. Your Purple Heart is 8.50/board foot!?!? (Assuming LF is the same as BF
I believe it was 8.50 a LF for a piece that was surfaced 4 sides and 6” ish wide, hard to remember, it’s been a minute.
@@Yarmlesoh ok because I just paid 15.99 at rockler but it was board foot. LF is linear foot I’m assuming
@@nonplayablecharacter4815 yeah LF is linear foot, realistically I paid about $17 a board foot here.
@@Yarmles yea makes sense. Great work by the way. I also seen your Nintendo one that one was very cool too. I liked the idea of the rug material you glued to stop from scraping
@@nonplayablecharacter4815 appreciate it man! Got a new video coming out tomorrow morning of something that I hope tops those two!
I watched the full video and I still don't know how
What do you mean?
@@Yarmles just saying your work is magical.
@@weirdlyhungry appreciate that man, thank you!
Dewalt gururla sunar
Hey now, there’s some festool in there 😅
All that fine craftsmanship to not use hidden hinges hurt to see
Gap between the doors needs to be there, I intentionally keep the gaps between the panels so it’s cohesive. You should give it a shot with some soss hinges.
@@Yarmles the gap makes sense but i see no reason you shouldn't be able to use hidden barrel hinges or even regular hidden hinges and create the gap based on the depth you route them out?
Without testing it, no way to know for sure.
great project. (i wish you would have shown the final opening and closing better from far away at the end of the video... i couldnt really see the full opening and closing of the doors!)
Check the pinned comment, I put some links to some shorts of it operating! Thanks for watching!
*_Should have had a larger shot to see the door in full._*
Check pinned comment for larger shots to see the door in full
What can I say? I loved the build, but disliked the video. Just being honest. I understand not being comfortable with using your voice, but you had so much opportunity to explain the how’s, why’s and logic involved, but all we got was bits of sign language. Seems you just wanted to show off your work, rather then helping people learn new skills. Great workmanship all the way, I just wish you provided more constructive information. ☮️♥️
It's pretty obvious what he's doing he showed all the steps. If you can't copy this from the video then you need woodworking lessons before attempting something like this. Maybe stick to making cutting boards.
This is not a “how to” channel nor was this a guide on making kinetic doors. This is exactly how I intended the video to come out, a satisfying build to relaxing music. I do plan on making a condensed version with foot notes at some point for those who wanted some details.
@@bestshittyphotographer lol, you’re funny. So hostile and immature of you! Anyways, opinions vary… I’ve been a woodworker/furniture maker for over 30 years. I would have no problem recreating that cabinet, but not everyone is so experienced. I think it would be a more beneficial video, (for even relatively new woodworkers), if a better explanation/dimensions, etc. was provided. I was very kind with my criticism; you unfortunately don’t possess the same ability or tact. Explains why you call yourself the bestSHITTYphotographer. Have a good day sir. 🫡
@@Yarmles And I respect that, I am just not a fan of silent videos… that’s just me, (and I’m entitled to my opinion). I didn’t leave a comment to offend you. Like I said, I think you showed great workmanship, and I think your cabinet is very cool. People are just so sensitive these days. You hear the criticism, but ignore the compliment. If I ever watch and comment on another of your videos, I’ll be sure to walk on ice. Enjoy your day.
@@timdoyon1964 no egg shells, I appreciate your feedback and thank you for the kind words.
How r u only getting like 100 views?
I appreciate the sentiment Ron, I started making videos and uploading 3 weeks ago so I am still new!