Slide down in it more! You have room for your legs, so slide the seat bottom forward and lay back in it more. You'll get lower to see out the winshield. I doubt you can slide down far enough to get your shoulder below the body, but that doesn't matter. Love this thing! So will our readers on BANGshift. Thanks for doing what you do. We love it.
My thought on the steering was why not flip the wheels around (left to right), so you can move the steering a bit more forward. That would give you a bit more leg room. That thing is awesome, and you are really honoring your friend's memory. Great work! You should be proud.
Amazing piece of art, the builder had a good sense of style and proportion. I am sure you will do it justice and Make It (even more) Kustom! PS: There are white wall golf cart tires if your scooter tires can't make the stretch.
@@MakeItKustom Love your work, by the way! I've learned so much from your videos, it's great. You have a real knack for explaining things simply, so that they make sense, and I really appreciate your 'can do' attitude and the way you explain how to do things without all of the expensive tooling and equipment.
Dig it! I'm actually currently sitting five feet from my black '56 2 Door Hardtop Special here in my livingroomkitchen that I drove all through high school and was my daily driver for over a decade.
This is such a cool project, really looking forward to the next video. When I first saw the body, all I could think of, was an episode of "My Classic Car". Dennis visited a guy who scratch built full function mini cars. First car he made he used old fridges for the panels. They all used Toyota running gear and motors. If I recall, they were street legal too. If you get a chance, check it out. It's here on TH-cam, just search My Classic Car mini car episode. Who knows, it may give you a spark for a new project. You're certainly doing tour friend proud on this build. I'm sure he's looking down and smiling, probably also laughing at you for the steering mishap lol. All in all can't wait to see her sitting on the whitewalls with some nice chrome smoothie hub caps.
@@MakeItKustom it was not a mistake you were just showing a way that it would not work ,, seen the same thing happen on a go kart build ,,, they started the kart and ran into a trailer with the backwards steering .. just a thought on the steering king pins .. drill a hole in the pipe for a grease fitting .. that way it wont get stuck ,, I have a mower that the king pins get rusty and you turn the wheel and it will not turn back easy .. take it apart clean the rust and it will work another year ,,
I was like “Oh man I hope he catches that before he welds it solid!” Then you pointed it out a minute later. I appreciate you showing the mistakes, we all make them! 👍 Oh, and as a ‘56 Buick owner, I vote for making it lower. Maybe mount the body just a touch lower in the rear for that “speedboat” rake?
Who better than you to keep your friend's legacy going you're doing a spectacular job as we see it you are a master of what you do I always say what else can you do just about thought I saw everything but no I keep seeing more and more and more that's why I like your channel that's why I watch you all the time learn something new everyday good job Karl good job on the video Kristina
LOVE this project and the fact you've picked up the torch and continued it from your buddy. Probably not worth the effort now since everything is finish welded but if you wanted more steering clearance you could always flip your spindles and put the tierod ends in front of the axle, that would of put the base of the column even further forwards and given it a little more cruiser angle too.
super cool project, in hindsight you could have swapped the steering knuckles side to side and kept that steering set and moving everything forward for more foot well space. but either way works really
Cool little car, I did notice the steering reversal.. I was thinking if you swapped the hubs/wheels so the steering was in front of the axle, you get leg room and fix the reverse steer. Anywho it'll be a great car show/swap meet head turner 👍👍
Hey Karl, nice job. Why not swap the front wheels left to right and place the tierods in front of the axle? That would give you even more legroom and less busdriver looks.
omg......that's crazy cool you should take a set of fishtail exhaust pipe tips out the back street rod style .you might be able to use custom golf cart rims and tires . keep your buddy spirit alive .
Tack welds are the ultimate 'reversable' setup method. I saw that about 5sec b4 it was questioned on video. It's not a mistake! when 'field engineering', it doesn't go inna book until it's done. What happens in 'field engineering' stays in field engineering. Michael in Colorado.
Thats sweet going to be a nice gocart. You should put a roll bar behind the drivers seat to give it a roadster feel cant wait too see it finished a nother great video!!!!!!!
I understand and applaud your commitment to finishing your friends project. Not a metal fab project but, a good friend brought his 64 Corvette to my shop where I was helping him do a frame off restoration. He passed away before completing the project and now it is in my shop where I am finishing the build, as funds allow, so I can give it to his daughter. Like you, I remember his vision and, I am trying to improve on his image. A project if love and respect...
Hey Karl Your late friend had such an eye for cool ! Now with your knowledge and abilities this mini Buick is going to get built and have a wonderful life. Your wifes Caddy is going to be a really cool ride. From what I have seen, the car will fit her personality to a T. Much the way your truck fits you. Thank you for making the videos so that we get to see all the neat stuff you do and build. Be Safe & Well
That is wicked cool! That is more than "cute". Karl if u or any of ur followers haven't seen this video search you tube for "1949 dwarf mercury. It uses Toyota running gear and it's kinda like this project. The guy is here in Arizona and to see his cars up close is a total trip. Great video as always!
Nice ride. There’s a guy I think he lives here in AZ that makes real miniature car’s like that. Drives them all over. I saw him and one of little cars at a motel in Prescott once. Have fun with that. Thanks
Your vision, creativity, design, fabrication skills, and attention to detail are second to none. I love how you describe what you are going to do then execute showing your rough sketches, measurements, cutting, the lathe work, welding, and all the steps, along with the mistakes. Absolutely fantastic! This will be an awesome build! Can’t wait to see the next chapter of this mini 56 Buick custom build.
I couldn't think of a better person to take over this project. It is a fabulous mini car. Best of luck with this build, but I know luck will have nothing to do with it. Craftsmanship and skill are the key. Can't wait to see the finished product. Don't feel bad about the steering. My Dad made the same mistake when he built a go cart for my brother and me. He never did change the steering. We had to learn left was right and right was left. Thanks as always and see you next time.
Many commenters have said it numerous times but it bears repeating. Your fabrication and design skills are extremely impressive. It’s a treat watching you do what you do. Thank you! I looked into buying the Draftsight CAD software you use and have mentioned in previous videos with the intent to purchase a copy but just can’t bring myself to pay the annual fee for use considering how little use it would get in my shop. Keep up the good work. This has become one of my favorite channels which says a lot since I don’t work on cars.
With gas prices the way they are this would be the answer lol. Your buddy did a great job on the car and we're all looking forward to seeing you cruising it around haha.
Man I absolutely love the mini car. You should widen the rear axle so that you can see the back tires. I would put a plate over the front steering so that you & your passenger can stretch your legs out. I love the drop axle also that really makes the rolling chassis. Keep up the great work and God Bless you and Kristina and your families. 🔥💯💪👍👍🙏🙏🤯
Has the man that started the project sadly isn't here to thank you for progressing his work i would like to thank you on his behalf. Thank you for taking on the project, thank you so much. Please keep us all up to speed. (TheDM UK)
That guy had a keen eye to build that body,I am glad that you are going to be able to finish what he started 👍,I can't wait to see the end result, it's going to be awesome, I know it will be 🏁
Dual outside pipes would make it appear lower, maybe smaller diameter tires to make the tire to wheel proportion look more appropriate. Absolute crazy little car. Shades of "Popular Mechanics" builds of the 40's & 50's.
You are the right person to take on your late friends project! I know you'll do him proud!
CAUTION! Genius at work.
It needs " dual " pipes , that car looks so neat!
Absolutely!
Slide down in it more! You have room for your legs, so slide the seat bottom forward and lay back in it more. You'll get lower to see out the winshield. I doubt you can slide down far enough to get your shoulder below the body, but that doesn't matter. Love this thing! So will our readers on BANGshift. Thanks for doing what you do. We love it.
Ya! That’s a good idea there’s lot of room up there. Thanks Chad ! I appreciate your posts 👊
My thought on the steering was why not flip the wheels around (left to right), so you can move the steering a bit more forward. That would give you a bit more leg room. That thing is awesome, and you are really honoring your friend's memory. Great work! You should be proud.
@@gpw203 He did a follow-up video explaining why he didn't flip it. Karl is a wise man. =)
I love how you say just a quick one. This would be at least a weeks worth of work for me ;-)
That little thing is so freaking cool!!! Can't believe you knocked that frame out so quick too!
It just wanted to go together haha I had all the metal laying around
Daymn so cool man. That CNC saves a lot of time and makes things look so good.
Amazing piece of art, the builder had a good sense of style and proportion. I am sure you will do it justice and Make It (even more) Kustom! PS: There are white wall golf cart tires if your scooter tires can't make the stretch.
Good to know! I didn’t realize I had options 😆 thanks man
Given that it's not a 'road going vehicle' I would think you'd be able to narrow those rims pretty easily, yes?
@@MrJonnoG yea I think that might be the way to go
@@MakeItKustom Love your work, by the way! I've learned so much from your videos, it's great. You have a real knack for explaining things simply, so that they make sense, and I really appreciate your 'can do' attitude and the way you explain how to do things without all of the expensive tooling and equipment.
I love the mini car idea!
Dig it! I'm actually currently sitting five feet from my black '56 2 Door Hardtop Special here in my livingroomkitchen that I drove all through high school and was my daily driver for over a decade.
No way that’s so cool!
The cnc plasma makes life so simple if you have an idea, you can make it. Super cool little car.
This is such a cool project, really looking forward to the next video. When I first saw the body, all I could think of, was an episode of "My Classic Car". Dennis visited a guy who scratch built full function mini cars. First car he made he used old fridges for the panels. They all used Toyota running gear and motors. If I recall, they were street legal too. If you get a chance, check it out. It's here on TH-cam, just search My Classic Car mini car episode. Who knows, it may give you a spark for a new project.
You're certainly doing tour friend proud on this build. I'm sure he's looking down and smiling, probably also laughing at you for the steering mishap lol. All in all can't wait to see her sitting on the whitewalls with some nice chrome smoothie hub caps.
"Dwarf cars" S22 E22
I’ve seen those cars! Yea really really neat. I know he was laughing at my mistake 😂
++¹¹+++a++a1
@@MakeItKustom it was not a mistake you were just showing a way that it would not work ,, seen the same thing happen on a go kart build ,,, they started the kart and ran into a trailer with the backwards steering .. just a thought on the steering king pins .. drill a hole in the pipe for a grease fitting .. that way it wont get stuck ,, I have a mower that the king pins get rusty and you turn the wheel and it will not turn back easy .. take it apart clean the rust and it will work another year ,,
DUDE ! FREAKING COOL !!...
...Black Art Forge..
Move the Wheels around and put the bracket in front of the axle ! Creates more leg room and better angle on the steering column!
Awesome work keep them videos coming loved your work 👍👍👍👏👏👏👏👍👍👍👏👏👏😀😀😀😀😀
I love what you are doing. Suggestion, Put the steering in front of the axle to keep your leg room. Switch the front wheels so you have front steer.
Hey Kirk,,,i was sitting here saying the same thing, why not front sterring
Thanks guys! My legs are going to go past the front axle line I’m thinking.
Congrats on making the 56 Buick Mini Kustom look great. The Skill and Cool Designs make it LOOK finer than a Frog Hair Split Four Ways. lv ur videos.
The rear end of that car is awesome! Such a cool project.
Chris P., a 50s era continental kit would look amazing on the back.
That's a sweet ride! IT NEEDS A FLAME THROWER!!!!
A great way to remember your friend by continuing to complete the build on this model car. Fantastic work yet again Karl. A master at work !!!!
Pretty kool that you're realizing your friend's dream.
I was like “Oh man I hope he catches that before he welds it solid!” Then you pointed it out a minute later. I appreciate you showing the mistakes, we all make them! 👍 Oh, and as a ‘56 Buick owner, I vote for making it lower. Maybe mount the body just a touch lower in the rear for that “speedboat” rake?
ya I was trying to go too fast haha the rake would look great. I have to see it when the tires go on how low it goes
Bag it
The dash would be cool with a old radio of that year model, it lights up and works, that would be a cool touch
Man I’m always amazed how quickly you can imagine the project and make it happen. I’m sure your buddy would be very happy with what you are doing.
Who better than you to keep your friend's legacy going you're doing a spectacular job as we see it you are a master of what you do I always say what else can you do just about thought I saw everything but no I keep seeing more and more and more that's why I like your channel that's why I watch you all the time learn something new everyday good job Karl good job on the video Kristina
Thanks a lot Eddie I really appreciate that!
LOVE this project and the fact you've picked up the torch and continued it from your buddy. Probably not worth the effort now since everything is finish welded but if you wanted more steering clearance you could always flip your spindles and put the tierod ends in front of the axle, that would of put the base of the column even further forwards and given it a little more cruiser angle too.
Ya totally! Actually I plan on having my feet far infront of the steering it has so much room up front
@@MakeItKustom Perfect then!
Steering backwards. That could be a fun challenge kart kinda like the reverse steering bike. It's looking awesome
One of a kind master piece!❤️❤️❤️❤️❤️❤️❤️❤️❤️🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
Congratulations!👍
Meat u can make it front steer 4 more room 4 feet. And better angle 4 steering wheel.great little project, have fun.looks good.
Can't wait for more on this , you are the man ,so talented!!
I like that music you are playing when you're putting the front end together
Hey Karl, Awesome to meet you and Kyle both. Thank you for your time. Keep up the amazing content !
Thats awesome.no better person to finish it off for sure.cant wait to see it done😉
This lil car is amazing! Great job with everything you've done to carry on your buddies project!
You are so smart for your age did awesome job Carl ,your friend e will be looking down at you and smiling!!!!!!!!!!!!!!! and all of us
Thansk mike!
This is brilliant so cool, thank you for sharing this with us, your so talented.my and my wife love watching, great content keep up the good work.
Thanks so much!
Wonderfully fun video to watch, thank you for that.
This is sooooo cool. Super excited to seeing you finish this very special project! 👍🏼
I love the Toonerville Trolley vibe to it. Leave the height where it is for golf courses and dirt roads at swap meets. Sooooo cool!
super cool project, in hindsight you could have swapped the steering knuckles side to side and kept that steering set and moving everything forward for more foot well space. but either way works really
Looks Great - What it does need are simulated rear FENDER STIRTS, that would make the rear look in proportion.
Cool little car, I did notice the steering reversal.. I was thinking if you swapped the hubs/wheels so the steering was in front of the axle, you get leg room and fix the reverse steer. Anywho it'll be a great car show/swap meet head turner 👍👍
Good video. Best go cart build I have seen.
Absolutely brilliant !
Conception and execution !
I've only recently found your channel, and I'm a fan already !
Great stuff !
Love your imagination !
Right on Stuart thank you!
Ooooh. A BONUS episode. 😆
Hey Karl, nice job. Why not swap the front wheels left to right and place the tierods in front of the axle? That would give you even more legroom and less busdriver looks.
sofa king awesome. can't wait to see it driving. your friend had a special talent. cheers
You should've reversed the spindles on opposite sides and placed the steering shaft arms to the front of the steering axle to give you more foot room
Yes, saw that steering issue right away. Great work on that chassis, wish I had all the tooling in my little shop!
Such a cool project . Carl you make everything look so easy.
omg......that's crazy cool you should take a set of fishtail exhaust pipe tips out the back street rod style .you might be able to use custom golf cart rims and tires .
keep your buddy spirit alive .
Awesome looking little car that man had it together do him proud Bro I no you can GBU later
One cool little car
Looks like a great fun little project. Sometimes these are the best.
Karl, I know you will bring this dream to life, it obviously means a lot to you, can’t wait to see what you do with it
It's great that you're bringing you buddies vision to life and what better way to cruise the car shows/swap meets.
Awesome little car . I would cut the frame and kick it out to the sides so you can sit lower in the car
Tack welds are the ultimate 'reversable' setup method. I saw that about 5sec b4 it was questioned on video. It's not a mistake! when 'field engineering', it doesn't go inna book until it's done. What happens in 'field engineering' stays in field engineering. Michael in Colorado.
Add a skirted section for the rear wheels that mini Buick is so cool thanks! JW
Best thing on TH-cam. EVER. 🇦🇺
I can't wait to see the next update on this. It put a smile on my face the whole time.
my wife and i love your channet . cant get enough!
Really nice project, looking forward to seeing you riding it around
Owsome Carl. 👌🏻
Cheers. 🍻
Cool little rod! i have a '56 Century ragger
Thats sweet going to be a nice gocart. You should put a roll bar behind the drivers seat to give it a roadster feel cant wait too see it finished a nother great video!!!!!!!
Too COOL!!!! I LOVE odd but COOL things like this it's what I like about your channel !!! KEEP UP THE GREAT WORK!!!!!
Best use of old car parts, I've ever seen. Something Bob Bleed and the Mad Fabricators would do.
Awesome. This couldn't have landed in better hands. Your friend would be happy.
Sweet! I am sure your buddy is smiling too.
I understand and applaud your commitment to finishing your friends project. Not a metal fab project but, a good friend brought his 64 Corvette to my shop where I was helping him do a frame off restoration. He passed away before completing the project and now it is in my shop where I am finishing the build, as funds allow, so I can give it to his daughter. Like you, I remember his vision and, I am trying to improve on his image. A project if love and respect...
That’s a really kind thing to do for his daughter. You are solid
Pretty sweet!!!
This thing is rad!
Hey Karl
Your late friend had such an eye for cool !
Now with your knowledge and abilities this mini Buick is going to get built and have a wonderful life.
Your wifes Caddy is going to be a really cool ride.
From what I have seen, the car will fit her personality to a T.
Much the way your truck fits you.
Thank you for making the videos so that we get to see all the neat stuff you do and build.
Be Safe & Well
Thanks so much chuck I appreciate that! Hope we can get to drive em
Soon!
That is wicked cool! That is more than "cute". Karl if u or any of ur followers haven't seen this video search you tube for "1949 dwarf mercury. It uses Toyota running gear and it's kinda like this project. The guy is here in Arizona and to see his cars up close is a total trip. Great video as always!
That’s just awesome!
Nice ride. There’s a guy I think he lives here in AZ that makes real miniature car’s like that. Drives them all over. I saw him and one of little cars at a motel in Prescott once. Have fun with that. Thanks
PS use flex seal white for the white walls.
That little car is so cute!
Your vision, creativity, design, fabrication skills, and attention to detail are second to none. I love how you describe what you are going to do then execute showing your rough sketches, measurements, cutting, the lathe work, welding, and all the steps, along with the mistakes. Absolutely fantastic! This will be an awesome build! Can’t wait to see the next chapter of this mini 56 Buick custom build.
Right on glad you like the process! It’s what I enjoy watching from other guys too. Helps wrap my head around it to follow along
@@MakeItKustom you're exactly right!
Wow that thing is so cool! Awesome! 🤘🔥
Great piece. Awesome!!
I couldn't think of a better person to take over this project. It is a fabulous mini car. Best of luck with this build, but I know luck will have nothing to do with it. Craftsmanship and skill are the key. Can't wait to see the finished product. Don't feel bad about the steering. My Dad made the same mistake when he built a go cart for my brother and me. He never did change the steering. We had to learn left was right and right was left. Thanks as always and see you next time.
Hahaha that’s awesome must have been a weird learning curve at first
Was wait for Caster, got the Caster, effing Catalina Wine Mixer! Great job Karl.
Not bad for a quickie. Love that you didn't edit the steering booboo, that was funny and nobody got hurt👍
Many commenters have said it numerous times but it bears repeating. Your fabrication and design skills are extremely impressive. It’s a treat watching you do what you do. Thank you!
I looked into buying the Draftsight CAD software you use and have mentioned in previous videos with the intent to purchase a copy but just can’t bring myself to pay the annual fee for use considering how little use it would get in my shop.
Keep up the good work. This has become one of my favorite channels which says a lot since I don’t work on cars.
Thanks so much! There are free versions of similar software out there. Try fusion 360
that thing is awesome!
This thing is stupid cool. Just amazing.
Epic upload bro. I know your friend would be proud of your work for sure. What an epic way to honour an obviously talented artist.
With gas prices the way they are this would be the answer lol. Your buddy did a great job on the car and we're all looking forward to seeing you cruising it around haha.
What a cool project... loving it!
That thing is going to be so cool … great video !
I really want to watch more videos about this project
Man I absolutely love the mini car. You should widen the rear axle so that you can see the back tires. I would put a plate over the front steering so that you & your passenger can stretch your legs out. I love the drop axle also that really makes the rolling chassis. Keep up the great work and God Bless you and Kristina and your families. 🔥💯💪👍👍🙏🙏🤯
Has the man that started the project sadly isn't here to thank you for progressing his work i would like to thank you on his behalf. Thank you for taking on the project, thank you so much. Please keep us all up to speed. (TheDM UK)
Your welcome and thanks for that man I’m sure he is stoked it’s going to be completed
Keep it simple and it will be a winner!
That guy had a keen eye to build that body,I am glad that you are going to be able to finish what he started 👍,I can't wait to see the end result, it's going to be awesome, I know it will be 🏁
your totally awesome with what you doing for your age
Dual outside pipes would make it appear lower, maybe smaller diameter tires to make the tire to wheel proportion look more appropriate. Absolute crazy little car. Shades of "Popular Mechanics" builds of the 40's & 50's.
I used to love reading those when I was a kid
It's pretty clear you had as much fun tinkering with that thing as I had watching it! Even better that it's such a special project for you.