I’m sure you’re self aware of this but thank you for being such a great human! You’re knowledgeable, humble, enthusiastic, and so much more. I like how nobody at PFI and Boosted Boiz complains or is lazy, it’s so hard to find good people like that. Brent you provide a space for experienced people to demonstrate and share what they know with the new generation, which inspires me as well. Thank you for picking up that camera and sharing your day to day life it means more than you could imagine
Hey Brent, if you ever want to tune with a newer laptop and the USB-Serial adapter and have it be reliable, I have found that adding a few snap on ferrite core magnets on the cable solved all interruptions. Apparently those cables are very subject to ground interference from the engines charging system. Just a tid bit of info that helped me out, and I now share to help you sir, as you have for all of us over the years. Thanks brotha!
Brent , Jamie such humble dudes car bangs out 720hp in the past but you don’t hear excuses you hear problem solving solutions freaking love these guys!!
Best Uber rider ever!!! Very nice gentleman (Mr. B) thank you so much for the amazing tip and awesome convo!!!!! Also your videos are really cool!!! I've been entertained for hours now😂😂
Can't wait to see you guys win the Freedom 500, gotta ripper and not be a quitter, really sad to hear Matt (Demolition Ranch) lost his younger brother to cancer though, really feel for the guy, love his channel, please everyone send him some love, I'm sure he'd love the community's support right now. R.I.P man. Stay safe everyone and remember to share the love, you never know if it could change someone's day. Much love to you all!
@@wf6951 I doubt that but it was probably sour. Or towards the edge of being sour. I use fuel stabilizer in everything, but you can sure tell the difference when the fresh fuel comes on.
@@michaelsantiago4740 Not for an NSX. The Honda C30A was only used in the NSX so it's pretty expensive due to it's rarity. Iron sleeved aluminum block with titanium rods from the factory.
Brother thank you for the content, I work in a shop during the “essential” work force shut down, shop is dead! I wait and wait for these videos and you haven’t been disappointing! Thank you and to the whole crew!
Brent you thought us to double check your basics. Check your timing, check your fuel, double check your plugs and coils. Double check for any kind of boost or exhaust leaks. You got this man.
Hey Brent, love the videos! I was wondering what IAT's were and perhaps you could do a smoke test? Maybe it's a turdo or maybe the life-size giraffe behind you made your intercooler pump forget to turn on ;) ...then again it could be a pinhole in a boost line
I know it's a pricey piece Brent, but if you do change the turbo again, I would suggest going with the G35, either the 900 or the 1050. The smaller size of the turbo itself while flowing more should make it get up and boogie. 👍
4 ปีที่แล้ว
i have a g25-660.. LOVE that turbo on my dc5 k24.. Its the perfect powerband for the street. Beautiful torque curve and spools by like 3500..
Had to leave a comment on my phone but watched on the TV so I could see that beautiful nsx on a big screen. But thanks for all the postive spirit and vibes. Btw Let's go!!
Brent! I have a v1 AEM box on my boosted del Sol and would love to meet up sometime! That's so cool to see someone using that box on such a nostalgic car!
I’m up in Fort Collins from Texas. I’m one of the so-called essentials hurray me. Keep up the good stuff love it all. You guys stay safe and healthy. Good look this weekend if y’all can make it to Florida.
When you were going through the mod list were you saying it had stock rods, with aftermarket pistons, sleeves, valvetrain etc. Or were you saying that ALL of that stuff is stock? If so, that gives me hope on pushing mine!
topnotchtsi I think he meant that everything was stock but he just tore it down and inspected it all and probably replaced the bearings.. I believe you’d be safe on pushing yours, I wouldn’t just go balls to the wall by any means but be considerate towards your mileage and run conditions on yours. Edit: Stock except for the things he mentioned 🤘🏼
Hey man we all do it. Governments like “don’t touch your face” and I’m over here picking my nose like ....... wat 😂 can’t wait to see yall in Florida keep on keepin on! 💪🏼💪🏼🤙🏼🤙🏼
Glad to see the nsx and the curse up and running again, cant wait to see both boogie down the track or go to Mexico lol hahaha keep it going guys love the content
I m so in 🥰 ❤️ with this badass machine ! I have full faith in the wizard of rad (Brent ) !! That he will make this hottest rod radder again !! It’s still the most beautiful boosted ride in the boosted boy stable !! Brent Earnhardt’s going to win the freedom 500 good luck 🍀 bro!!
Could be the coils on the NSX, but here's a long shot.. Check your cams.. I've seen a Honda K series that had a misfire that had a broken exhaust cam pulley pin break causing the cam to wander as the cam & crank sensor was confused causing a misfire.. Keep up the Great work, love your attitude Brent.. If more people were as easy going as you were the world would be a better place..
i dont generally like square or rectangle pipes...but those looks so good on the nsx...if there is a "print screen" button, which im sure it does, it will screen capture
Firstly awesome channel. Two major questions / suggestions for you. What's the fuel pressure at & is it holding steady or dropping off in the higher rpm? Reason I ask is it looks like it's real lean in the higher rpms. How long since the injectors were flow tested & serviced? This car been sitting around for some time now & as you know old fuel & electronic injection = blockages & misfires. Drain the tank, throw a new filter & pump sock on it & retest it before replacing that turbo. Thanks for the content & look forward to seeing your next upload.
We should image that laptop and back it up. could probably also run it as a VM on your other laptop and pass through the USB -> serial adapter. But at least you would have a backup.
V1 you need old school lappy to tune. I had to buy an old used one for my Soup back in the day just because it wouldnt reliably connect to anything with adapters.
Did you know that Dyno Sauce works as liquid tire chains in the snow?? Spray on, let it set up a minute or two and away you go. Avoid spinning it off. I'm sure it's what Amway sold 40 years ago. My buddy's Ford country squire station with Bald tires and an open diff would climb a mountain with Amway spray on traction. Sticky stuff in a can.
Love that NSX, Glad to see that you guys are going to Florida to Isolate at the FF. So the BatRod and The Curse are making the trip. Is Roman taking the Grinch? and will Kyle take the MR2 or is the Rowdyssey going to make it? Will Emilio get Hondaroo done? Tune in tomorrow same bat channel, same bat time...
it's nice to see the real world of tuning when the bolt on part just doesn't do what was hoped. so what's the plan now? smaller exhaust housing or different turbo?
Hahaha that title is killer. If you read this I want you to know that when I saw your rad racing tattoo I about lost my mind! I've loved that movie so much since I was a kid. I watched it on super beta max (I'm only 31 so no one i know knows what that it haha) and now I dont have a copy of it to watch anymore!
We know that you are going a long way so stay healthy keep your 6’ distance from strangers and hope you have a great time can’t wait to see the video of the race. Be safe for sure!!
Hey Brent hope all is well with you and yours bro. How do I go about scheduling for a remote tune from you? I’m in tarpon springs Florida and desperately need some help...
Yes please🙏🙌 get to the factory and bunker down with the whole gang. Be safe and have a Blast. (I'VE ALREADY PURCHASED MY PAY-PER-VIEW TO WATCH/SUPPORT) stay safe and let the fun commence.👍🤙🤙🤙🤙🤙🤙
Im a construction manager in NYC, i travel to different job sites all over the city. this virus thing has my anxiety levels through the roof. watching your vids calms me down and gets my mind prepped for working on my turbo 350z. im fabbing the intercooler piping now and hopefully figure out how to scale the MAF for 3" piping. any suggestions?
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
I’m sure you’re self aware of this but thank you for being such a great human! You’re knowledgeable, humble, enthusiastic, and so much more. I like how nobody at PFI and Boosted Boiz complains or is lazy, it’s so hard to find good people like that. Brent you provide a space for experienced people to demonstrate and share what they know with the new generation, which inspires me as well. Thank you for picking up that camera and sharing your day to day life it means more than you could imagine
LOL you're top comment on this and the last vid I watched by Rudnik! Saw your name and pic in the same spot in two tabs.
Hey Brent, if you ever want to tune with a newer laptop and the USB-Serial adapter and have it be reliable, I have found that adding a few snap on ferrite core magnets on the cable solved all interruptions. Apparently those cables are very subject to ground interference from the engines charging system. Just a tid bit of info that helped me out, and I now share to help you sir, as you have for all of us over the years. Thanks brotha!
Ahhhh useful info.
Thanks dude.
Brent , Jamie such humble dudes car bangs out 720hp in the past but you don’t hear excuses you hear problem solving solutions freaking love these guys!!
You guys deserve way more subscribers. 👍🇦🇺🤘👌🇦🇺🇦🇺👍
Agreed
They should hit the 250k milestone by the end of this month. They're so close
Weird time in our times my brothers and sisters. Thank God for Brent and the boys to entertain us and much love from Knoxville, TN!
Best Uber rider ever!!! Very nice gentleman (Mr. B) thank you so much for the amazing tip and awesome convo!!!!! Also your videos are really cool!!! I've been entertained for hours now😂😂
You drove Brent to the airport?
In Florida?
Can't wait to see you guys win the Freedom 500, gotta ripper and not be a quitter, really sad to hear Matt (Demolition Ranch) lost his younger brother to cancer though, really feel for the guy, love his channel, please everyone send him some love, I'm sure he'd love the community's support right now. R.I.P man. Stay safe everyone and remember to share the love, you never know if it could change someone's day. Much love to you all!
How old is the fuel? That car has been sitting a long time.
It turned into varnish. Thats how old it is.
@@wf6951 I doubt that but it was probably sour. Or towards the edge of being sour. I use fuel stabilizer in everything, but you can sure tell the difference when the fresh fuel comes on.
I doubt he used old fuel
@@boostjunkie2320 things do get overlooked especially when you are in a big hurry.
@@phillipward937 Ain't that the truth
That exhaust is glowing hard on the run where it spit fire. Have some kind of restriction?
The exhaust itself is restriction, technically.
"yeah ill bring another engine for ya just incase you play too hard" that flex thoooo haha
Hahaha Funny shit ay
What flex ???
200 dollar honda motors
@@michaelsantiago4740 Not for an NSX. The Honda C30A was only used in the NSX so it's pretty expensive due to it's rarity. Iron sleeved aluminum block with titanium rods from the factory.
@@michaelsantiago4740 That ain't no single jingle run of the mill D series bro
Brent's trying to flatten the quarantine curve with some nice entertaining tuning moments. Much respect biz 🌞🌱💚
Brother thank you for the content, I work in a shop during the “essential” work force shut down, shop is dead! I wait and wait for these videos and you haven’t been disappointing! Thank you and to the whole crew!
In one of your old videos from like 2 years ago I remember you called the one tune a corona tune. Now we have quarentune lol
No way! Link it.
@@driller524 k hang on
@@driller524 th-cam.com/video/6MAKnieRz68/w-d-xo.html it's like 10 seconds after 13:25
I love how dedicated you are for bringing us content. You are a daily vlogger :)
Tuned the nsx on a floppy disk 💾
Absolutely love this nsx. That graph is nuts... power everywhere
OMG i was getting ptsd flash backs looking at that old dell and hearing the HHD tick. 😫
Brent you thought us to double check your basics. Check your timing, check your fuel, double check your plugs and coils. Double check for any kind of boost or exhaust leaks. You got this man.
You can put a solid state in that old brick as well and it will speed it up quite a bit. Just clone the drive and you're good to go
Hell yeah brothers! Keep it up man that NSX is legendary. Brent, I wish I could bring my Lude to ya'll one day so you can boost/tune it for me!
Damn Brent she sounds so good bro wow =)
Be very careful Brent... I hope you make it back safe!
You guys just save my focus on this quarantine, keep the good work 👍🏻
Glad to be a part of the family!
SO FREAKING RAD MAN, BEEN WAITING ON THESE NSX VIDEOS CAUSE THAT IS MY DREAM CAR, SOOO AMAZING. YOU GUY'S ARE BADASSES!!!
Were also all deaf from you yelling.
Ouch. Acuras are my favorite
Ha ha you can hear the hard drive click and spin still on that dinosaurs
Hell yeah the NSX is still awesome even at 664. You'll get the wrinkles ironed out of her though.
Thanks for keeping us entertained!
The chop on that neon!!
Hey Brent, love the videos! I was wondering what IAT's were and perhaps you could do a smoke test? Maybe it's a turdo or maybe the life-size giraffe behind you made your intercooler pump forget to turn on ;) ...then again it could be a pinhole in a boost line
I know it's a pricey piece Brent, but if you do change the turbo again, I would suggest going with the G35, either the 900 or the 1050. The smaller size of the turbo itself while flowing more should make it get up and boogie. 👍
i have a g25-660.. LOVE that turbo on my dc5 k24.. Its the perfect powerband for the street. Beautiful torque curve and spools by like 3500..
Wooohooooo that purty NSX!
Had to leave a comment on my phone but watched on the TV so I could see that beautiful nsx on a big screen. But thanks for all the postive spirit and vibes. Btw Let's go!!
Im so glad we got some content on the NSX!!!!! I dont care if its down on power!!!
The nsx deserves a haltech with all the sensors for everything, every bell and whistle that haltech have... amazing car❤️
Can't wait to see the curse in action.
Just a head up when you were showing the exhaust I could see some apart glowing red like it had a lot of back pressure be a good starting point
Fuck Yeah! "Race Cars and a Race Track.. Leave us there"!
Brent! I have a v1 AEM box on my boosted del Sol and would love to meet up sometime! That's so cool to see someone using that box on such a nostalgic car!
Wow, seeing that V1 software brings back SO many memories! The AEM guys loved that NSX motor too back in the day :) BoostComp tune?
Sweet quaran'tuned nsx 😁🤘🏼📈
I’m up in Fort Collins from Texas. I’m one of the so-called essentials hurray me. Keep up the good stuff love it all. You guys stay safe and healthy. Good look this weekend if y’all can make it to Florida.
Hey guys thanks for the content...
Brent the RH overaxle pipe was glowing big time long before the end of the pull on the last 2 pulls.
cheers
That thing revving with the turbo whistling is an orgasmic sound :O
When you were going through the mod list were you saying it had stock rods, with aftermarket pistons, sleeves, valvetrain etc. Or were you saying that ALL of that stuff is stock? If so, that gives me hope on pushing mine!
topnotchtsi I think he meant that everything was stock but he just tore it down and inspected it all and probably replaced the bearings.. I believe you’d be safe on pushing yours, I wouldn’t just go balls to the wall by any means but be considerate towards your mileage and run conditions on yours.
Edit: Stock except for the things he mentioned 🤘🏼
Hey man we all do it. Governments like “don’t touch your face” and I’m over here picking my nose like ....... wat
😂 can’t wait to see yall in Florida keep on keepin on! 💪🏼💪🏼🤙🏼🤙🏼
These get me through the day 🥵
Glad to see the nsx and the curse up and running again, cant wait to see both boogie down the track or go to Mexico lol hahaha keep it going guys love the content
I m so in 🥰 ❤️ with this badass machine ! I have full faith in the wizard of rad (Brent ) !! That he will make this hottest rod radder again !! It’s still the most beautiful boosted ride in the boosted boy stable !! Brent Earnhardt’s going to win the freedom 500 good luck 🍀 bro!!
Could be the coils on the NSX, but here's a long shot.. Check your cams.. I've seen a Honda K series that had a misfire that had a broken exhaust cam pulley pin break causing the cam to wander as the cam & crank sensor was confused causing a misfire.. Keep up the Great work, love your attitude Brent.. If more people were as easy going as you were the world would be a better place..
NSX has always been my favorite honda..next to a 91 prelude and a 84 honda civic hatch..
NSX looks Sharp!
i dont generally like square or rectangle pipes...but those looks so good on the nsx...if there is a "print screen" button, which im sure it does, it will screen capture
so happy with nsx videos
How can this video have dislikes? Car sounds amazing!
One of the cleanest imports of all time in my opinion. Not bad for a 1994 Acura/Honda and that red is super clean.
someone get this man a beautiful turbo please! I love these cars
Firstly awesome channel. Two major questions / suggestions for you. What's the fuel pressure at & is it holding steady or dropping off in the higher rpm? Reason I ask is it looks like it's real lean in the higher rpms.
How long since the injectors were flow tested & serviced? This car been sitting around for some time now & as you know old fuel & electronic injection = blockages & misfires. Drain the tank, throw a new filter & pump sock on it & retest it before replacing that turbo. Thanks for the content & look forward to seeing your next upload.
Also, on AEMlog, when opening the log, click on 'overlays' and select which channels you want, to add multiple channels to a single graph
We should image that laptop and back it up. could probably also run it as a VM on your other laptop and pass through the USB -> serial adapter. But at least you would have a backup.
Sick car.(NSX)..and shes on her way. Nice work boyz!
Loveeeeee the nsx more videos of this car PLEASE! BTW DID HE SAY STOCK INTERNALS???
The curse sounds like a race car. Ready to see The Bully back together. My favorite build at PFI.
The curse is a hell of a car. I remember in old vids Brent always says he loves how choppy the cam sounds
Is that a curfew for the quarantine or just the city bylaws?
Love the nsx even back since the gran turismo days great job guys
These videos are The Best!
I love chasing gremlins like that.. Keep grinding!!
V1 you need old school lappy to tune. I had to buy an old used one for my Soup back in the day just because it wouldnt reliably connect to anything with adapters.
Stay safe guys!!!
So close to 300,000 subscribers 👍
Stupid question, maybe new head gasket is thicker then the old one lowering compression?? Or old fuel?
Best of luck goin forward to all at PFI🖒
QuaranTUNEd is instant like.
12:42 nice glow 👍👍❤️🦅
DAMN.......that fuel in the tank has got to be old as the Pyramids.....??
Did you know that Dyno Sauce works as liquid tire chains in the snow?? Spray on, let it set up a minute or two and away you go. Avoid spinning it off. I'm sure it's what Amway sold 40 years ago. My buddy's Ford country squire station with Bald tires and an open diff would climb a mountain with Amway spray on traction. Sticky stuff in a can.
Stuck inside here in Wisconsin thanks for the videos really appreciate it.
7:40 damn thats a big clock, i wouldn't have thought time of day is that important in a sports car?!
Its for keepong track of your lap times.. no im not serious 😂🤙🏼
That’s an aftermarket radio dude
Love that NSX, Glad to see that you guys are going to Florida to Isolate at the FF. So the BatRod and The Curse are making the trip. Is Roman taking the Grinch? and will Kyle take the MR2 or is the Rowdyssey going to make it? Will Emilio get Hondaroo done?
Tune in tomorrow same bat channel, same bat time...
Maybe try a bigger back housing on the turbo like others said it dose start glowing red under there
it's nice to see the real world of tuning when the bolt on part just doesn't do what was hoped.
so what's the plan now? smaller exhaust housing or different turbo?
Been waiting to see this car again for a long time. Happy to see it in the past couple videos!!
NSX is the best Honda ,the red looks good with the rear lights 💉
Stay inside! but we`re going to Florida seems a little counter productive tbh
Hahaha that title is killer. If you read this I want you to know that when I saw your rad racing tattoo I about lost my mind! I've loved that movie so much since I was a kid. I watched it on super beta max (I'm only 31 so no one i know knows what that it haha) and now I dont have a copy of it to watch anymore!
At idle, it sounds like my old 93 legend 2dr 6 speed. Acura beat the heck out of Lexus back in the early 1990's!!!
awesome!. im turboing my nsx also. canada boarder is close, so i cant pick it up.
Hell yeah brother! I need me a 2020 Quarentuned NSX 🤘🏻
Have you thought about a newer ECU, so you can tune it like everything else?
Yo Brent... you can get DB9 to USB adapters.... that way you don't need to use an antique with a serial port to tune. lol
Love this car so much Im glad its getting the attention it needs!
Im direly in need of dyno sauce. What do you guys do. i can't seem to find anything besides using VHT track prep.
@3:00 that XP goodness!!!!!!!
We know that you are going a long way so stay healthy keep your 6’ distance from strangers and hope you have a great time can’t wait to see the video of the race. Be safe for sure!!
Should try to get your hands on a Borg Warner Efr 8474. Turbo is rated for 950hp. Billet compressor wheel/ titanium exhaust wheel
I thank you god you guys didn’t change it from the nsx files
Hey Brent hope all is well with you and yours bro. How do I go about scheduling for a remote tune from you? I’m in tarpon springs Florida and desperately need some help...
Yes please🙏🙌 get to the factory and bunker down with the whole gang. Be safe and have a Blast. (I'VE ALREADY PURCHASED MY PAY-PER-VIEW TO WATCH/SUPPORT) stay safe and let the fun commence.👍🤙🤙🤙🤙🤙🤙
damn....what transmission is in the curse? an auto in a FWD...hell yea that's bad ass!
Im a construction manager in NYC, i travel to different job sites all over the city. this virus thing has my anxiety levels through the roof. watching your vids calms me down and gets my mind prepped for working on my turbo 350z. im fabbing the intercooler piping now and hopefully figure out how to scale the MAF for 3" piping. any suggestions?
I don't care ...I 👀 PFI I start clicking,am from the Caribbean I love your work an I can't forget Boosted Boiz ,💯🇹🇹