fired my new one from amazon before it stopped working. So yourself a favor skip amazon and buy from these guys. Already sent mine in to have upgraded. So at least what ever is wrong with it is probally a stock issue. Do not buy fropm amazon for this air rifle. You get a way better version and deal here. These guys are AWESOME
@Crimson Sky I've disassembled mine a few times, watched a couple of different TH-cam on it. Would've been nice to have had this then lol. I'm keeping this one in favorites for now.
Its just a 6 point 1in deep socket. It has a section on the end that was turned down slightly smaller to fit down into tight spot on something different.
I bought a used version with a lower serial number but same model number. The previous owner must have taken it apart trying to fix it and left a few parts out when he shipped it to me. I'm missing the screw that holds the hammer in place and the screws that hold the two plastic covers onto the top of the receiver by the cocking lever. Do you sell these screws? I also noticed mine does not have that skeleton butt stock piece that fits inside the main stock shell. Was this added in later serial numbered guns? The reason I ask is my pins that hold my fire control components in the receiver don't protrude like yours do so even if I had that plastic skeleton piece it wouldn't work with the pins I have. Last but not least; do you sell extra bolts? Mine is very tight and may be bent causing it to bind. I think the previous owner may have bent it trying to get it apart from feeding too many pellets into it and jamming up the magazine removal. There's pry marks in the magazine well indicating someone forced it out for some reason.
You guys ever think about an improved fill nipple? Ever since I got mine it sticks regularly. One that had a manual shutoff / bleed valve would be a boon in the field 👍
Is that antiseize you're putting on the trigger assembly? Looks thick and sticky. I didnt notice any factory goop on disassembly. I've got this girl shaved, polished, and crisper than a fresh Granny Smith apple.
How much time did it take, for this tear down & reassemble of the Benjamin / Bulldog? I am loving my mods you have preformed on my Benjamin Bulldog. By the way you have learned Aron well, he does have talented hands, a true gunsmith / technician he is! ⚔️🧂🇺🇸🗽🇺🇸🧂⚔️
Goof Alert! I show the barrel O-ring being reinstalled after Aaron installed the barrel in the breech, but you get the idea :)
fired my new one from amazon before it stopped working. So yourself a favor skip amazon and buy from these guys. Already sent mine in to have upgraded. So at least what ever is wrong with it is probally a stock issue. Do not buy fropm amazon for this air rifle. You get a way better version and deal here. These guys are AWESOME
@@MegaCyberleader thank you! we appreciate the kind words
Best video of this I've seen yet. Very detailed and thorough.
Thank you!
@Crimson Sky I've disassembled mine a few times, watched a couple of different TH-cam on it. Would've been nice to have had this then lol. I'm keeping this one in favorites for now.
Great work!!😎
Thank you! Aaron has gifted hands 🙂
Good video, but it would have been nice to know what the bit and socket sizes you were using.
Awesome video! What's that socket you're using to take off the air gauge at 8:30?
Its just a 6 point 1in deep socket. It has a section on the end that was turned down slightly smaller to fit down into tight spot on something different.
I bought a used version with a lower serial number but same model number. The previous owner must have taken it apart trying to fix it and left a few parts out when he shipped it to me.
I'm missing the screw that holds the hammer in place and the screws that hold the two plastic covers onto the top of the receiver by the cocking lever. Do you sell these screws?
I also noticed mine does not have that skeleton butt stock piece that fits inside the main stock shell. Was this added in later serial numbered guns? The reason I ask is my pins that hold my fire control components in the receiver don't protrude like yours do so even if I had that plastic skeleton piece it wouldn't work with the pins I have.
Last but not least; do you sell extra bolts? Mine is very tight and may be bent causing it to bind. I think the previous owner may have bent it trying to get it apart from feeding too many pellets into it and jamming up the magazine removal. There's pry marks in the magazine well indicating someone forced it out for some reason.
You guys ever think about an improved fill nipple? Ever since I got mine it sticks regularly. One that had a manual shutoff / bleed valve would be a boon in the field 👍
that happens usually when your air source is not clean. moisture and other deposits in the air hose can make the check valve stick.
Is that antiseize you're putting on the trigger assembly? Looks thick and sticky. I didnt notice any factory goop on disassembly. I've got this girl shaved, polished, and crisper than a fresh Granny Smith apple.
That is black Lithium grease
I have a slow leak that I can’t figure out where it’s coming from. How much to have you go through it and while you there mod some stuff??
give us a call.
How much time did it take, for this tear down & reassemble of the Benjamin / Bulldog? I am loving my mods you have preformed on my Benjamin Bulldog. By the way you have learned Aron well, he does have talented hands, a true gunsmith / technician he is!
⚔️🧂🇺🇸🗽🇺🇸🧂⚔️
Thank you! took him about 45 minutes, but we have done a lot of them :)
How did you get the hammer back in,or did you not take it out0
The hammer comes out the back. You have to remove the adjuster and spring and then there is a small cap head screw on the side that has to come out.
17:34 you can see the hammer
Where does the shorter screws go in the stock reassemble
on one side of the sling stud.
What is your instagram? I have a lot of questions regarding to bulldog Benjamin! Thank you!