Remove scratches and polish a Cartier watch
ฝัง
- เผยแพร่เมื่อ 27 มี.ค. 2014
- Anie restores & polishes a watch quickly and easily on the patented JOOLTOOL system.
Buy all the necessary supplies @ WWW.JOOLTOOL.COM
Abrasivse Used:
3M Scratch Eraser Disc (aka Scotchbrite EXL Fine)
3M Radial brush (220 grit for satin finishing)
Jooltool SEE-THRU Felt Disc
3M Radial brush (1 Micron for polishing) - วิทยาศาสตร์และเทคโนโลยี
Incredible results in such a short amount of time.
This is an excellent looking kit , good idea !
Sheeze you got some steady hands! Works like a surgeon!
This was like looking at an artist work. Great video.
Fabulous tutorial! BTW, the dial is the crown (round) that is attached to the stem (pin). Thank you for posting this very informative and instructional video!
Annie! Great video, really interesting, and what a nice voice you have too, great job Thanks Annie :)
You're awesome Anie! I love how excited you get about a perfect polish! I do as well... You definitely know your trade. Fun to watch.
I take care of my own watches. I find it therapeutic to my Soul.
That slotted disk idea is genius!! I've polished a lot of jewelry with the horizontal shaft bench motors, that see thru is a wonderful concept!
your polishment skill is excellent.
Great, high-quality video.
waw waw wawwww i love the watches and i am amazing... and the pics after and last? is great video...you are wonder woman for the watches. thanks for this. bless your hands.
Thank You for the tutorial.
Thank you for watching.
Amazing! Thanks so much for sharing
So satisfying to watch
(crown, I think) Very satisfying to watch, great job!
Hello Anie jan. Thanks for sharing a very useful tutorial. Just a question: how to polish and remove scratches (tools and technique) from watch hands?
Thank you very much!!!
No, don't worry about taking it apart..
You do realize I am at a trade show and this is a live filmed video? There is no time nor equipment to dismantle a watch. Please save your ignorant comments, this is a place of learning and helping the community of professional Watch polishers. Thank you, Anie the girl who invented the Jooltool
Hi Anie. What if the polish was in the center while the sides are brushed/satin finish? Should everything be run under the Scotch Brite to remove scratches, then buff the center? I'm wondering how I would bring the shine out in the middle without affecting the side parts of the links.
Great job bravo !
Merci Minas!
can one polish even the high glossy bezel of a santos galbee ? i have a broad, superficial scratch on it...
Great video! The luster you achieved, pales in comparison to how pretty you are! 🖒
Watch my Cartier Santos Video it's new! th-cam.com/video/jzXF1KM9VS8/w-d-xo.html You are all the sweetest! Thank you for watching my videos xoxo -Anie
you are sexy lady😍😍
Hi Anie, what about finishing of titanium metal in brushed look? How os this achieved?
Annie, if you ever have the chance PLEASE do this video with the Cartier Santos.
Hi Blu, I polished a CARTIER Santos with you in mind! Here it is th-cam.com/video/jzXF1KM9VS8/w-d-xo.html thank you for watch my videos, you are so sweet! -Anie
Watch my new video with the CARTIER Santos! th-cam.com/video/jzXF1KM9VS8/w-d-xo.html thank you for watching xoxoAnie
Watch my new video with the CARTIER Santos! th-cam.com/video/jzXF1KM9VS8/w-d-xo.html thank you for watching xoxoAnie
This is probably a dumb question but I'm asking anyway! The 3M discs don't last very long on my Flex Shaft. Would they last longer with this system? I polish quite a bit and seem to go through them. I love this system and am planning on getting one so I'm curious. Thank you so much!
Miss which polishing compound you used ? Where I can buy it ?
If I use paper to polish what grit should I use ? Thanks
really nice video thank you for sharing your knowledge you deserve a million thumbs up god bless :)
Anie do you have a store in NY ?
Can I buy all these in one package?
Hi Anie, How do you clean the polish ninja disc. As polishing is done the disc gets contaminated, how is this cleaned?
You can use a piece of sandpaper about 220 grit or finer and place it a FLAT, block of wood and sand the felt down, turn it on High speed and hold it under the felt for just 5 seconds and you should be good! It's the same process as in my "how to Prep your Felt Wheel Video"
Boston?
What about a 42mm balon bleu?
Can you see that? Ugh! gorgeous. Ugh! look at that. Ugh!
What is the cost of this polishing machine including all the accessories ?
Nice work ....do my rolex as a demo 😉
is it possible to replace the lost sapphire?
This is fine if you happen to have a polishing machine at home!
What compound did you use?
MY OWN JOOLTOOL COMPOUND. $5.99 jooltool.com/shop/abrasives/1-oz-bar-of-compound/
de que pais é?
doesn't that will scratch or damage the crystal?
DID YOU NOT WATCH THE VIDEO? It does not scratch, NOR did the wheel touch the crystal! Great job!
you´re a lovely woman, and I love your voice
crown not dial..but goooooood work
Well unfortunately I do not have this machine :/
I could never give a customer a watch refinished so poorly. I see fine scratches and dings still on the side of the case, and the high polished edges of the band . She moves the watch fast so its hard to see there are still scratches and dents. I have used her tool many times and its excellent if u take the time to do the complete job. She has the right idea but didn't do the whole job.
Hi Steve, it's Anie. You are correct, I didn't take the time. And I wouldn't have given it to my customers either. The video was filmed for a specific customer who just needed to see the steps I use. The proper steps would be using the 3M Unitized wheel to remove all the scratches thoroughly BEFORE the Felt Polish. I didn't removed every scratch deliberately, again the video was intended to be a instructional tool NOT on how perfect I could polish. My polishes pass the Loop as I'm sure your do too! Love, Anie
Thank God that wasn't my watch you just destroyed.
are u Iranian?
Great video! The luster you achieved, pales in comparison to how pretty you are! 🖒
Hi Anie, what about finishing of titanium metal in brushed look? How is this achieved?
Hi Craig, If the surface is lightly scratched then use our 3M Brushes in 120 grit or 220 grit. If there is allot of scratches or pits use the Scotchbrite wheel in Fine then follow with the brushes I mentioned. With Love, Anie