I've been shooting on P (program) for months, but this will solve my blank LCD issues & bring back the features to my camera. Excellent step by step. It's still a good camera with the right glass.
top.. funcionou.. comprei meu display no aliexpress.. troquei com base no vido.. showw! Dica.. quando for fechar colocar circuito grande primeiro depois o menor
Yay! After watching you I know what the part looks like I need and my fear of things just falling out when I open it is gone! Thank you for this video! You are a blessing!!! :)
To add..Mine broke without breaking the outer screen too. I had my camera in the bag, on my shoulder and I bent down to get something off the floor and my camera bag fell off my shoulder, hit the ground on the top of the bag. Yes, I had the LCD screen (had the long zoom lens on) facing towards the top of the bag. Dummy me!! Thanks again for the video!!
This is awesome! I have the exact same camera and it broke at Disney so I will try fixing it on my own with the exact LCD you used! What kind of screwdriver did you use for this?
I use a screwdriver set from Boxer; you can find it on Amazon for about $13: amzn.to/2pUm1oT It's my go-to set for virtually everything. I highly recommend it. I've worn out a couple, and am currently on my 3rd, but I'm just going to keep buying the same set, because they work perfectly for electronics repairs, and actually last quite well. Good luck with your repair!
Mr777manbearpig Upon checking, it looks like the ribbon for the power button is visible at the top of the circuit board. I would definitely make sure it didn't get knocked lose.
Thank you very much it is all fixed! I didn't realize there was a battery sensor on the door so I didn't close the camera up before testing it. You saved my camera!
r.ebay.com/lLdvVu is the item I purchased. amzn.to/2nJCjje is the same item available from Amazon. You can probably find them cheaper elsewhere, but I prefer purchasing from eBay or Amazon. Just make sure your screen looks the same as the one you order (position of the ribbons more than anything else)
@@ArtByStrongWolf hello it's ok i have a canon T3 but it shows a black stripe on the screen of the video on the left side on that same screen there you are changing but in the photos there is no such defect could you help me ??
I cannot find an LCD replacement screen anywhere and after your video it has encouraged me to try and fix my husbands camera myself. Is there anywhere else I can look?
The screws on this camera are coming out so easy. I have all the tools you have and I am STRUGGLING to get out a few? I feel like I’m ruining the screws because of how hard I have been trying to get them out. Any advice would be helpful.
CristelHulali That is odd; these will be a little tight from the factory, but not extremely tight. I would definitely make sure you're using the largest screwdriver to that will fit into the screws; using a tip that is too small will make it a lot easier to strip it out. Also, don't be afraid to press hard on the back of the screw driver; I put a lot of pressure on it, to get good 'bite' with the driver.
If memory serves, I believe it is a 00, but I could be mistaken. I recommend a screwdriver kit with a variety of tip sizes; the kit I use has sizes 000-1, and covers 99% of my repairs.
What screwdriver are you using? My new lcd screen just arrived but the screwdriver set that I purchased doesn’t seem to work, I don’t want to strip the screws. Would greatly appreciate your help with this.
The screwdrivers that are included with replacement parts are usually junk, I definitely don't recommend using them. The set I use is about $15 on Amazon, and I highly recommend it: amzn.to/2DH2iNw
I've been shooting on P (program) for months, but this will solve my blank LCD issues & bring back the features to my camera. Excellent step by step. It's still a good camera with the right glass.
top.. funcionou.. comprei meu display no aliexpress.. troquei com base no vido.. showw! Dica.. quando for fechar colocar circuito grande primeiro depois o menor
Yay! After watching you I know what the part looks like I need and my fear of things just falling out when I open it is gone! Thank you for this video! You are a blessing!!! :)
To add..Mine broke without breaking the outer screen too. I had my camera in the bag, on my shoulder and I bent down to get something off the floor and my camera bag fell off my shoulder, hit the ground on the top of the bag. Yes, I had the LCD screen (had the long zoom lens on) facing towards the top of the bag. Dummy me!! Thanks again for the video!!
Thanks it was the #00 . Also my down button is not working. All others are. Any suggestions? LCD is working now. Thanks a lot . Very helpfull
This is awesome! I have the exact same camera and it broke at Disney so I will try fixing it on my own with the exact LCD you used! What kind of screwdriver did you use for this?
I use a screwdriver set from Boxer; you can find it on Amazon for about $13: amzn.to/2pUm1oT
It's my go-to set for virtually everything. I highly recommend it. I've worn out a couple, and am currently on my 3rd, but I'm just going to keep buying the same set, because they work perfectly for electronics repairs, and actually last quite well.
Good luck with your repair!
Extremely helpful video, although after I followed all the instructions and replaced my screen I have no power to my camera. Any suggestions?
Mr777manbearpig Upon checking, it looks like the ribbon for the power button is visible at the top of the circuit board. I would definitely make sure it didn't get knocked lose.
Thank you very much it is all fixed! I didn't realize there was a battery sensor on the door so I didn't close the camera up before testing it. You saved my camera!
Mr777manbearpig Awesome, thanks for the feedback!
What is the backlight for ? Do you know if the replacement brought the backlight?
I drop my canon t3 and my screen crack and now it wont turn on. Do you think that I just need to get a new lcd screen replacement?
where can I buy the lcd? what is the model of the lcd?
good video!
r.ebay.com/lLdvVu is the item I purchased. amzn.to/2nJCjje is the same item available from Amazon. You can probably find them cheaper elsewhere, but I prefer purchasing from eBay or Amazon. Just make sure your screen looks the same as the one you order (position of the ribbons more than anything else)
@@ArtByStrongWolf hello it's ok i have a canon T3 but it shows a black stripe on the screen of the video on the left side on that same screen there you are changing but in the photos there is no such defect could you help me ??
I cannot find an LCD replacement screen anywhere and after your video it has encouraged me to try and fix my husbands camera myself. Is there anywhere else I can look?
The screws on this camera are coming out so easy. I have all the tools you have and I am STRUGGLING to get out a few? I feel like I’m ruining the screws because of how hard I have been trying to get them out. Any advice would be helpful.
CristelHulali That is odd; these will be a little tight from the factory, but not extremely tight. I would definitely make sure you're using the largest screwdriver to that will fit into the screws; using a tip that is too small will make it a lot easier to strip it out. Also, don't be afraid to press hard on the back of the screw driver; I put a lot of pressure on it, to get good 'bite' with the driver.
Hello what is the size of the screwdriver used? Thank you
If memory serves, I believe it is a 00, but I could be mistaken. I recommend a screwdriver kit with a variety of tip sizes; the kit I use has sizes 000-1, and covers 99% of my repairs.
What screwdriver are you using? My new lcd screen just arrived but the screwdriver set that I purchased doesn’t seem to work, I don’t want to strip the screws. Would greatly appreciate your help with this.
The screwdrivers that are included with replacement parts are usually junk, I definitely don't recommend using them. The set I use is about $15 on Amazon, and I highly recommend it: amzn.to/2DH2iNw
what mm you use man for the camera?
Really helpful
thanks you so much man ;)
How much is the lcd bro?
thanks dude
Bro clip your nails 😭 very helpful video btw 🙏