FOR THOSE OF YOU WHO SAY YOUR SCREEN SEEMS BIGGER THAN THE WINDOW SLOT: freaking I finally figured it out. you need to fit one top corner into place by holding it super diagonally, then you place other top corner into the frame. After that you realign the frame making it undiagonal and as you fit both top corners in. pull up the tabs on the bottom to fit the other half in. DONE, I FINALLY DID IT
Omg girl ur a miracle!💐 I thought I messed it up cuz I dragged my 2nd floor window screen *in* thru the window(struggle🤦🏼♀️)...but I can’t get it back *out* the same way to reinstall and I’m not climbing a ladder two stories onto a sloped roof...I’m trying this today. Awesome tip!!!
Just moved into my first apartment and two of my windows are missing screens! This Dad video really helped, now I’m pretty sure I can just install new ones all on my own! Thanks for the simple but needed video!
"I asked my boys if they knew how to do it and they said no" lmfao either their full of shit n have been sneaking out n thought you where about to pinch them or they had no idea but know now aha
Thank you so much! Prior to watching this video, I left my window open and a huge mosquito and a weird looking spider came into my room. I moved a couple months ago, so my bedroom doesn't have a window screen. I took the window screen from the spare bedroom and was able to install it with your help!
Thank you so much!! I've replaced many screens over the years but none had the tabs and compression clips so I was lost as to how to put the ones in my new apartment back! Now I can do it!!!
Thank you. I've been wanting to clean my windows, but wasn't sure how to remove and replace the screens. This was as helpful as if I had a dad to come show me.
thanks for the video! I had to remove my screens from my apartment windows for cleaners and I am on the top floor and was having a hard time on my own. Thanks for the easy to follow footage!
It worked! You just helped us solve a problem living on the third floor, and hearing bamboo branches and leaves screeching against the window all night and keeping us up. Thank you!
Very helpful. Never had to do this before. Had our first hot day in a while and wanted my window open, but the screen wasn't in it. You're a lifesaver.
My screen appears to be bigger than the slot it came out of. It really is not bigger becasue it came out of the exact slot. But when I try to put it back in, it doesn't appear as though I can put it back in without bending the frame. What am I doing wrong?
Thank you so much! I've been avoiding installing my new screen all summer because it intimidated me so much. 😅 Your video made it quick and easy work. I appreciate you so much
Thank you so much, I be able to put back my window screens after I watched your video , burglar pry out the screen this afternoon, I couldn't put it back, so good thing I found you, my screen have the two clips on the side of the screen, no tabs, but opposite side do have raised edge I can grab onto!
Appreciate the video. Older I get the more visual I need to understand how things work. It got hot this weekend but the screens are so dirty I want them clean to start the season off right.
One of the best things I watched in a while on YT....almost as good as when I was watching a random vid of some family and I saw a grandpa get a chair and step on top of the trash can to push it down. Yes....I didn't think of doing that lol. I was now able to put more trash in lol.
I have a few screens where the tabs are broken off. You can take a flat bladed screwdriver and pry up a little bit on the bottom of the screen. Careful here, you can put a dent in the screen if you pry to hard.
Thank You for the great videos! They are helpful... I am changing my moms faucet when I go to her house tomorrow for xmas visit but all the other vids i've seen call for plumber's putty but I noticed you didn't use any while changing yours, is it just due to the model faucet you bought?
Nice video but it doesn't seem to be working for me. I'm also trying to clean my Windows but my window blocks it from pushing out as well as in. There's a metal piece preventing me from pushing it out and my actual window and the metal on the screen is keeping me from pushing it towards my body. What would be a second option for this dilemma?
Hello- may I have a question: I have a hard time getting the screen out because both of the bow shapes kinka broke so I cannot push that side inward in order to get the other side out? I am afraid to use too much force that I might break the frame? Can you give some tip? I did not see the two flaps like your screen on mine at all? Are they different?
I have the window screen with the U-shape clips (3:10) that I got out to replace the screen. I cannot get the screen back into the grove because there is not a tab on the other side of the screen. What can I do to re-install the screen, besides tape?
which lip does the screen go into. The outer one is easy, but the screen leaves a little gap. The inner lip is VERY difficult, and I already bent a screen trying to get it in. 3 of the 4 corners go in, but I cant get the 4th in without getting it caught
+Sam Bain You need to be careful you don't bend the frame when removing the screens. Sometimes prying with a straight blade screwdriver near the corners helps with the removal.
i had to order more screens because i got frustrated and bent it. the tabs broke, and the screen wouldnt fit.....i tried the screwdriver but didnt work....its only taking out for my AC, other than that i wouldnt take it out...UGH, ill try again with the new one, Question ? on your last video the bigger screen, is that on backwards ? the tab was on the outside? shouldnt that be on the inside ? so no one can break into the home ?
On our windows that are high off the ground the tabs are on the inside for ease of removal. On the bigger windows on the deck the tabs are on the outside of the screen for the same reason. I use window secondary locks with thumbscrews on the glass frames of those windows to prevent someone from breaking in.
maybe you can help me with my slider, it has no lock, and my cat opens it, so im putting duck tape on it to keep shut, its in the basement, double french doors, any suggustions ?
Sue Shattuck If it's a sliding glass door you could either cut a pipe of pipe or wood that would sit in the track behind the door to keep it from sliding open, or even use a secondary lock with thumbscrew and fasten it to the track edge just behind the door that slides.
I'm having trouble with mine, I think they weren't supposed to be removable but my stepdad took them out to clean and couldn't get them back in. There is a lip on the frame all around where the screen goes and nothing is removable or unscrew able. The screens are one solid piece as well, so they would have to be bent and forced back in and I don't want to try and fall off the ladder
I have the two clips and they are on the side of the screen. I am on the second floor and live in a co-op. I could not for the life of me get the screen back in after repairing it. I spent almost an hour trying to get the stupid thing back in but could not from the inside. I also have NO tabs. In the process of pushing, pulling, tugging, I now have the screen half in and half out, jammed in on one side and I cannot get it out. I wanted to avoid going to the super tomorrow but I am afraid if I pull and tug any more I will break the frame. I already think I broke one of the medal clips and that's why it is jamming now. Any suggestions? I managed to get screen out with no problem, but no way going back in.
If you don't have the tabs to pull on then you might have to use a flat blade screwdriver to pry on the opposite side of the frame to get the spring clips to compress. Also double check that you don't have dirt built up or some kind of obstruction in the frame slot the screen goes into.
I have the same exact screen, but my problem is that when I put it back in the screen isnt completely lined up and the corners stick out. Do you know how to fix this?
The metal spring clips on the opposite side should push the ends with the tabs into the groove. Can you hold the tabs and wiggle the corners into place opposite the spring clips?
One thing I discovered is that it can go in backwards. On my screen, I had to pull back the springs with a screwdriver and pull it out on that side. I turned it around and was able to do as in the video. Having it the other way, there's no possibility of getting it out by pulling on the tabs. Weird.
If the tabs are missing you'll have to take a flat blade screwdriver and carefully pry down (or up) on the screen on the opposite end of screen from where the clip is. Once the edge of the screen clears the window frame you can pull it out.
I have window screens from the mid-1970s; they only have two sliding tabs that move in and out on one vertical side (i.e., on the right, when working from inside) and NO springs whatsoever. There is some tension built into the design to aid in removal/reinstallation. It was miserable getting them out, and I've just about given up trying to put them back in place. There must be a simple method way to reinstalling them, but it's difficult working alone. You have to work one side in, then bend them a lot to get them to fit in place. It feels like I'm close to leaving a permanent kink in the frame, so I back off. They were just re-screened at Ace Hardware, and now I can't reinstall them. I spent almost two hours trying from the inside, then going back outside to reinstall them before I gave up. This is a job that either takes less than five minutes for a professional to do, or four hours if you're a neophyte. So far, I haven't found a video that addresses my type of window screens. I'd appreciate usable advice from professionals who have dealt with this issue. Thanks.
oh man..... good video, but!!! but.... it's never works so easy (maybe its just for me) but I always have to bend frame either pull out or place in back in.... literally every time i have band the frame, do you know why screen always seems to be bigger..... anyways .... i going to make my own windows screens this time and it will be a bit smaller
lmao mines isn't the size of the whole window & my little metal-bops were on the side instead of the top. im also on the second floor so i couldn't go outside to do it. finally got it fixed tho one of the metal-bops were slipped to the side so when i thought it was actually in, the higher one was out by just a little bit & messed up any chance of me pushing it in, but the method pretty much works the same for the sideways ones too.
No tabs here and compression clips are on the side (versus the top). Thing is, while the screen is the same size as the one it is to replace it just does not seem to fit, not from the inside nor the outside.... I know it doesn't make sense but it appears to be too tall as I haven't been able to fit the full length of the side where the clips are into the window.
Do you have a build up of dirt in the bottom track that's keeping you from getting the top and bottom in? If not double check the dimensions of the new screen with the opening.
iScaper1 No dirt; the aluminum of the frame is not allowing the screen to be pushed over. I will again hold the old one up to the replacement to double check size. Yes, it is the same size, but old one had no tabs nor clips. New one has clips and plastic corners.
+David Rau The windows that are 10' above the ground I have the tabs on the inside so I can remove the screens from the inside of the house. The rest of the windows I have the tabs on the outside so I can remove the screens from the outside of the house.
FOR THOSE OF YOU WHO SAY YOUR SCREEN SEEMS BIGGER THAN THE WINDOW SLOT: freaking I finally figured it out. you need to fit one top corner into place by holding it super diagonally, then you place other top corner into the frame. After that you realign the frame making it undiagonal and as you fit both top corners in. pull up the tabs on the bottom to fit the other half in. DONE, I FINALLY DID IT
Melina Diaz
Good tip, thanks for posting.
Melina Diaz thank you!
Omg girl ur a miracle!💐 I thought I messed it up cuz I dragged my 2nd floor window screen *in* thru the window(struggle🤦🏼♀️)...but I can’t get it back *out* the same way to reinstall and I’m not climbing a ladder two stories onto a sloped roof...I’m trying this today. Awesome tip!!!
y are my tabs on the side ;-;
@@Cluetube ME TOOO
You've helped so many people sneak out lol
m jenks People? You mean children.
Vaughn Miller Children aren't people?
Vaughn Miller no more specifically teens
Honestly I'm just watching this to sneak out LMAO
samee lol
omg dude me to 😂😂😂
TRUUUUUUU 😂😂😂😂
Same dude lmao
same lol
Good luck to whoevers watching this to sneak out and dont get caught.
Allen Rodriguez thanks
Thanks
thank youuu 😭😭😭
lol. .
😳
I love that you can learn anything from youtube these days. Thank you!
Just moved into my first apartment and two of my windows are missing screens! This Dad video really helped, now I’m pretty sure I can just install new ones all on my own! Thanks for the simple but needed video!
helping kids sneek out since 2012
That's what I'm here for
parker richards
i thought i broke mine! haha im glad i researched it inb4 parents woke up
"I asked my boys if they knew how to do it and they said no" lmfao either their full of shit n have been sneaking out n thought you where about to pinch them or they had no idea but know now aha
that actually how i got here
parker my tabs are sideways help
Thank you so much! Prior to watching this video, I left my window open and a huge mosquito and a weird looking spider came into my room. I moved a couple months ago, so my bedroom doesn't have a window screen. I took the window screen from the spare bedroom and was able to install it with your help!
people wanting to sneak out I'm just trying to star gaze :(
Isn’t that what sneaking out is
same im gunna sit in my window at night
Sameeee
I’m trying to sneak out and never come back to reality I’m done with this
Grant Harrison u good bro?
We don't have black tabs
most of the people watching this are locked out of their house or wanting to sneak out 😂
Unicorn Baby ur so right 😂😂
Unicorn Baby yep pretty much
My mom ain’t home yet so I’m learning for tonight this is my first time
just did the second one tbh. 😂
Damn right fuckin 530 in da morning
Thank you so much!! I've replaced many screens over the years but none had the tabs and compression clips so I was lost as to how to put the ones in my new apartment back! Now I can do it!!!
Thanks Mary Jo and good luck.
Thank you for this video! Now I can sneak out of the house
Ummm thanks I think. I'm not going to be getting in trouble with your parents am I?
Thanks for the comment, I'm glad the video was helpful.
Thank you. I've been wanting to clean my windows, but wasn't sure how to remove and replace the screens. This was as helpful as if I had a dad to come show me.
thanks for the video! I had to remove my screens from my apartment windows for cleaners and I am on the top floor and was having a hard time on my own. Thanks for the easy to follow footage!
missniss
Thanks for watching.
It worked! You just helped us solve a problem living on the third floor, and hearing bamboo branches and leaves screeching against the window all night and keeping us up. Thank you!
Thanks Jan. I glad you're able to get some sleep now.
Thank you. You were the only one that said which way the brackets went
I'm gonna use this for when I can sneak out of my house! Thanks!
+Ylva 0,0
Don't get caught :)
iScaper1 I won't :D
+Jylee Rones same omg
i tried it then i realised i lived in a 3 story apartment building
***** lol i do to im on the bottom floor so lucky me
Thanks so much for the information. Super useful for someone living on their own for the first time.
Very helpful. Never had to do this before. Had our first hot day in a while and wanted my window open, but the screen wasn't in it. You're a lifesaver.
Thanks! Took longer to watch your video than it did to put that sucker back in! :)
Best video on you tube...that was driving me crazy...thank you
Thank you very much to share this VDO. I'm going to replace my window screens and you just help me to save somemoney to DIY. Thanks again!! :)
Thanks Sue and good luck.
My screen appears to be bigger than the slot it came out of. It really is not bigger becasue it came out of the exact slot. But when I try to put it back in, it doesn't appear as though I can put it back in without bending the frame. What am I doing wrong?
Same!
We don't have those spring loaded screens, that's why. I'm not finding these at Home Depot. I'd replace mine with them in a heartbeat.
Same here.
Mine has two tabs on the left. I can pull it to compress it horizontally, but it is longer virtically too. How can I compress it four ways?
Thanks for the tip. Our screens have the clips on one side versus the bottom but the principle was the same.
Thank you something simple but yet mysterious, now I can clean them.
Thank you so much! I've been avoiding installing my new screen all summer because it intimidated me so much. 😅 Your video made it quick and easy work. I appreciate you so much
You're welcome!!
Excellent n very helpful video!!!🙌. Thank you for sharing this with us!👍
Thanks for the feedback.
Thank you so much, I be able to put back my window screens after I watched your video , burglar pry out the screen this afternoon, I couldn't put it back, so good thing
I found you, my screen have the two clips on the side of the screen, no tabs, but opposite side do have raised edge I can grab onto!
Thanks Evon for the information.
Thanks SO MUCH- exactly what I NEEDED to learn- you're the man for sharing and posting - thanks
Glad to help.
Appreciate the video. Older I get the more visual I need to understand how things work. It got hot this weekend but the screens are so dirty I want them clean to start the season off right.
+Donna H
Thanks, good luck on your cleaning.
Thank you so much, I thought I would have to bring someone to help me put it back in my window
Thanks for watching, I'm glad the video helped.
Doesn't sound good. So there are no spring clips on the screen that you compress to get them in the screen slots?
What if there is no tags on the screen???
Did you figure it out
@@bree2674 no
One of the best things I watched in a while on YT....almost as good as when I was watching a random vid of some family and I saw a grandpa get a chair and step on top of the trash can to push it down. Yes....I didn't think of doing that lol. I was now able to put more trash in lol.
exactly what i was looking for. Thank you!
You are welcome!
Thanks for the comment.
I'm home alone and I knocked my screen out and it landed on the driveway and doesn't fit back in the slots
Great video thanks for helping me help myself
Thanks Kelli.
I have a few screens where the tabs are broken off. You can take a flat bladed screwdriver and pry up a little bit on the bottom of the screen. Careful here, you can put a dent in the screen if you pry to hard.
Just what I needed to know! Thank you!
Thanks Leslie for watching.
The clips hold the screen snug in place. If the screen doesn't have the clips you'll have to position the screen manually.
This didn't help me sneak out like every other person but it actually helped me when I accidently popped my screen out.
Thanks, your video also helped me a lot, well done!
+kenmo6
Thanks, I appreciate the feedback.
omggggg finallyyyy I've been wanting to sneak out
Thank you so much! You're a life saver!
Guinea Gal •
Thanks for the feedback.
Thank You for the great videos! They are helpful... I am changing my moms faucet when I go to her house tomorrow for xmas visit but all the other vids i've seen call for plumber's putty but I noticed you didn't use any while changing yours, is it just due to the model faucet you bought?
Nice video but it doesn't seem to be working for me. I'm also trying to clean my Windows but my window blocks it from pushing out as well as in. There's a metal piece preventing me from pushing it out and my actual window and the metal on the screen is keeping me from pushing it towards my body. What would be a second option for this dilemma?
Hello- may I have a question: I have a hard time getting the screen out because both of the bow shapes kinka broke so I cannot push that side inward in order to get the other side out? I am afraid to use too much force that I might break the frame? Can you give some tip? I did not see the two flaps like your screen on mine at all? Are they different?
Try a flat blade screwdriver in one of the corners to pry the corner out.
If you can't get into the house and your window had a mechanism that prevents opening from outside what should I do
Very helpful, thank you 😊
your voice is so relaxing
I have the window screen with the U-shape clips (3:10) that I got out to replace the screen. I cannot get the screen back into the grove because there is not a tab on the other side of the screen. What can I do to re-install the screen, besides tape?
I’m doing this so that I can feed my bird outside nearby
Thank you! I didn't have the black tabs on some of my windows, but I wiggled them in anyways.
thank you. am college student and needed to pop my screen back in before i move out haha.
SJmastr0
Thanks, I'm glad the video was helpful.
which lip does the screen go into. The outer one is easy, but the screen leaves a little gap. The inner lip is VERY difficult, and I already bent a screen trying to get it in. 3 of the 4 corners go in, but I cant get the 4th in without getting it caught
+MrJamesBecca
On a few of my screens I had to use a flat blade screwdriver to get the last corner in.
iScaper1 thank you for the tip!
This won't break the screen will it? I just want to take it out to clean
+Sam Bain
You need to be careful you don't bend the frame when removing the screens. Sometimes prying with a straight blade screwdriver near the corners helps with the removal.
Thank you for this video!
+SmilingNJGirl
Thanks for watching.
I replaced my screens. The little tabs I put in pull out. Frustrating. Is my spline not wide enough?
That was helpful. Thank you!
+Barbara Kohn
Thanks Barbara.
Thanks Matthew.
Thanks so much for sharing!
Thanks, I appreciate the feedback.
i had to order more screens because i got frustrated and bent it. the tabs broke, and the screen wouldnt fit.....i tried the screwdriver but didnt work....its only taking out for my AC, other than that i wouldnt take it out...UGH, ill try again with the new one, Question ? on your last video the bigger screen, is that on backwards ? the tab was on the outside? shouldnt that be on the inside ? so no one can break into the home ?
On our windows that are high off the ground the tabs are on the inside for ease of removal. On the bigger windows on the deck the tabs are on the outside of the screen for the same reason. I use window secondary locks with thumbscrews on the glass frames of those windows to prevent someone from breaking in.
very cool, i didnt know about locks w/thumbscrews ! Thx :)
maybe you can help me with my slider, it has no lock, and my cat opens it, so im putting duck tape on it to keep shut, its in the basement, double french doors, any suggustions ?
Sue Shattuck
If it's a sliding glass door you could either cut a pipe of pipe or wood that would sit in the track behind the door to keep it from sliding open, or even use a secondary lock with thumbscrew and fasten it to the track edge just behind the door that slides.
im sorry, its the screen door....i leave it open but cant secure it..lol
Thank you sir!
What do you do if your screen doesn't have finger holes?
I'm having trouble with mine, I think they weren't supposed to be removable but my stepdad took them out to clean and couldn't get them back in. There is a lip on the frame all around where the screen goes and nothing is removable or unscrew able. The screens are one solid piece as well, so they would have to be bent and forced back in and I don't want to try and fall off the ladder
Are all of them like this? And yes. Sneaking out.
You're a life saver.
I love your video! ♥
Thanks, I appreciate the feedback.
I have the two clips and they are on the side of the screen. I am on the second floor and live in a co-op. I could not for the life of me get the screen back in after repairing it. I spent almost an hour trying to get the stupid thing back in but could not from the inside. I also have NO tabs. In the process of pushing, pulling, tugging, I now have the screen half in and half out, jammed in on one side and I cannot get it out. I wanted to avoid going to the super tomorrow but I am afraid if I pull and tug any more I will break the frame. I already think I broke one of the medal clips and that's why it is jamming now. Any suggestions? I managed to get screen out with no problem, but no way going back in.
If you don't have the tabs to pull on then you might have to use a flat blade screwdriver to pry on the opposite side of the frame to get the spring clips to compress. Also double check that you don't have dirt built up or some kind of obstruction in the frame slot the screen goes into.
I have the same exact screen, but my problem is that when I put it back in the screen isnt completely lined up and the corners stick out. Do you know how to fix this?
The metal spring clips on the opposite side should push the ends with the tabs into the groove. Can you hold the tabs and wiggle the corners into place opposite the spring clips?
Yeah I can and I get the springs in first, and then I try pulling the tabs in and it goes in partially but then the corners hang out like I bent it.
OrangeeJuiicee
If the corners are sprung a little bit you might have to take a flat blade screwdriver to get them in.
Hmmm I'll try it. Thank you (:
We have a old house and we are trying to put a new screen in but we can't get it out
what if your screen doesn't have the compressing part? What to do then?
Thanks for the video!
I'm watching this to install some window screens so I don't have to worry about bugs, lol
How do you remove the screen if it doesn't have the tabs to pull up on?
Smaller flat blade screwdriver works.
One thing I discovered is that it can go in backwards. On my screen, I had to pull back the springs with a screwdriver and pull it out on that side. I turned it around and was able to do as in the video. Having it the other way, there's no possibility of getting it out by pulling on the tabs. Weird.
Slowly and steadily :)
What if you only have but 1 of those compression clips and also don't have them tabs at the bottom.
If the tabs are missing you'll have to take a flat blade screwdriver and carefully pry down (or up) on the screen on the opposite end of screen from where the clip is. Once the edge of the screen clears the window frame you can pull it out.
I have window screens from the mid-1970s; they only have two sliding tabs that move in and out on one vertical side (i.e., on the right, when working from inside) and NO springs whatsoever. There is some tension built into the design to aid in removal/reinstallation. It was miserable getting them out, and I've just about given up trying to put them back in place. There must be a simple method way to reinstalling them, but it's difficult working alone. You have to work one side in, then bend them a lot to get them to fit in place. It feels like I'm close to leaving a permanent kink in the frame, so I back off. They were just re-screened at Ace Hardware, and now I can't reinstall them. I spent almost two hours trying from the inside, then going back outside to reinstall them before I gave up. This is a job that either takes less than five minutes for a professional to do, or four hours if you're a neophyte. So far, I haven't found a video that addresses my type of window screens. I'd appreciate usable advice from professionals who have dealt with this issue. Thanks.
Same, did you ever find a fix?
Nice ad about cars thanks
oh man..... good video, but!!! but.... it's never works so easy (maybe its just for me) but I always have to bend frame either pull out or place in back in.... literally every time i have band the frame, do you know why screen always seems to be bigger.....
anyways .... i going to make my own windows screens this time and it will be a bit smaller
Vlad Rudnyk
Melina Diaz has a good point, you need to tuck one corner in first then the other corner will go in.
but what about a fitted window. a screen that has edges on all sides. and is fitted in on all sides to the window?
Good question, I've never had window screens like you describe. Might be worth a call to a glass company on how to remove that type of screen.
Mine don’t have those metal this at the top it just got the little brown things at the bottom. I can’t put it back in I’m get caught for leaving
Oh my god there is a video for this.
lmao mines isn't the size of the whole window & my little metal-bops were on the side instead of the top. im also on the second floor so i couldn't go outside to do it. finally got it fixed tho
one of the metal-bops were slipped to the side so when i thought it was actually in, the higher one was out by just a little bit & messed up any chance of me pushing it in, but the method pretty much works the same for the sideways ones too.
No tabs here and compression clips are on the side (versus the top). Thing is, while the screen is the same size as the one it is to replace it just does not seem to fit, not from the inside nor the outside.... I know it doesn't make sense but it appears to be too tall as I haven't been able to fit the full length of the side where the clips are into the window.
Do you have a build up of dirt in the bottom track that's keeping you from getting the top and bottom in? If not double check the dimensions of the new screen with the opening.
iScaper1
No dirt; the aluminum of the frame is not allowing the screen to be pushed over. I will again hold the old one up to the replacement to double check size.
Yes, it is the same size, but old one had no tabs nor clips. New one has clips and plastic corners.
Very nice stuff.
Does it matter that black tabs are facing outside or inside?
+David Rau
The windows that are 10' above the ground I have the tabs on the inside so I can remove the screens from the inside of the house. The rest of the windows I have the tabs on the outside so I can remove the screens from the outside of the house.
I'm watching this because *I'm locked out* of my apartment.
Update: I had to use a butter knife to wedge out the tabs.
I fought a wasp for an hour trying to get it out of my room. It's time for the screen to be replaced.
Hopefully you got it out without getting stung.
my kitchen window does not have the black tabs,so what next?
+Carla Page
On my screens that the tabs are broken off I use a smaller flat blade screwdriver.
what is your screen doesn't have tabs.
Thank you, thank you, thank you!!!
I went stargazing on my roof in the middle of the night then I couldn't get the net back in, so this helped.
Thank you!
Welcome!
Thanks big dawg