All the people crapping on the guy about how much power he will lose. I just watched the whole video because i enjoyed watching his fab work. Nice work 👍🏻
All the hate but people don't know that Mugen made this exact exhaust in the late 90's/early 2000's for Honda's. Sounded awesome and made more power. I say congrats on this and well done!
@@utley there is no way you can tell what this will do with backpressure since you dont know how many cylinders, length, configuration, temperature, type of intake etc etc etc. I work with mufflers, this one might actually increase flow comparing to a stock one
@@WadeWilson- you increase pressure every time you make a 90 degree bend substantially. All he did was create a restriction in the line, and a big one too. You dont need to know anything more since the medium hasnt changed and its going through the same pipe. Pressure is inversely proportionate to velocity, and all he did was create a feedback loop. Want to know how it works? Make a hydraulic line in the same schematic and see for yourself.
Thing is you didn't separate the pipes on the inside so the exhaust is just going to follow the path of least resistance!, and that extra pipe is just going to be extra weight.
Because for some applications straight pipes *ARE JUST TOO DAMN LOUD!!* By all means, if you're at the drag strip, straight pipes are fine. If you want something to also cruise in, while being able to have a conversation in the car, straight pipes _might_ be a tad too much.
Did he? Amazing how you don't even know for what car this will be used and what kind of pressure the system flow will need. You must be a very skilled foresighted mechanic.
All this fabrication with all this mass has already been done with the same results in a smaller package in the countless aftermarket exhaust industries…this is basically 2 short glass pack mufflers…period !
All the people crapping on the guy about how much power he will lose. I just watched the whole video because i enjoyed watching his fab work. Nice work 👍🏻
And, they don't even know how much power he'll lose, if any. It's all about scavenging.
sound check
All the hate but people don't know that Mugen made this exact exhaust in the late 90's/early 2000's for Honda's. Sounded awesome and made more power. I say congrats on this and well done!
Any added volume can only help the exhaust system
Gold is very conductive, I don't wear wedding ring at work. Great fabrication skills though.
subscribed and liked - would have loved to hear a before and after sound
Putting an x-pipe inside and then perhaps tuning the loop length should be interesting.
You had said earlier that you would check the sound in the car but you didn't do it. Why did you lie?
Oh, the betrayal
@NathanNostaw what are you saying I not understand
@@NathanNostaw😂😂😂
I am just as upset as you are
@apatrenfo sooooo it' not mistake
How does it sound
People complaining about this lowering the horsepower of the engine know crap about mufflers.
how? all it did was increase the amount of work the engine needs to do since it now has to cancel out its own pressure.
@@utley there is no way you can tell what this will do with backpressure since you dont know how many cylinders, length, configuration, temperature, type of intake etc etc etc. I work with mufflers, this one might actually increase flow comparing to a stock one
Btw its called a twin loop system.
@@WadeWilson- you increase pressure every time you make a 90 degree bend substantially. All he did was create a restriction in the line, and a big one too. You dont need to know anything more since the medium hasnt changed and its going through the same pipe. Pressure is inversely proportionate to velocity, and all he did was create a feedback loop. Want to know how it works? Make a hydraulic line in the same schematic and see for yourself.
What was the point??? NO Demo
What car are you fitting this too and can we please have a sound clip? 👌
Nicely done, looks great
Great job.
where from you order that white matterial? Is it ceramic wool?
fiberglass exhaust packing
@wraith600original1 Thanks. Found to order. It is 1100° C 👍
Cool idea would probably sound good too. But your kinda limited to pickups where there is more room.
Thing is you didn't separate the pipes on the inside so the exhaust is just going to follow the path of least resistance!, and that extra pipe is just going to be extra weight.
What sound does it make?
Brrrrrrrrr
@GodModuleAU 😁
Vroom vroom
@stumpymcgivons1042 😁
Гарно виконана робота 🦾🦾👍👍🔥🔥 Цікаво який ефетк від такої конструкції 🧐🧐😉😉💛💛💙💙
This is to cancel the drone is it not
OK........But what does it sound like >??
Сделай видео на работающем автомобиле.
I say this sounds sooooooo good!
So you deliberately reduce the flow efficiency for what reason
Because for some applications straight pipes *ARE JUST TOO DAMN LOUD!!*
By all means, if you're at the drag strip, straight pipes are fine. If you want something to also cruise in, while being able to have a conversation in the car, straight pipes _might_ be a tad too much.
Did he? Amazing how you don't even know for what car this will be used and what kind of pressure the system flow will need. You must be a very skilled foresighted mechanic.
Is it not to kill the drone
When your exhaust is flowing too fast so you slow it down with a loopty loop.
It looks cool
So do chrome lug nuts.
I always feel like these should be an oval can and tripple pass.
What was the point? The performance of this contraption will be worse than using a better designed muffler.
Really? Why will the performance be lower? Where will this affect the backpressure? You don't even know for what car this is being used.
Хорошая работа
Excelente
Should have used Kapton/Polyamide tape
Sound please
nice 😃
You know they make mufflers that do that internally. Save all that fab and welding work, for something else.
Durée de vie de la laine céramique... 10 minutes 😮
Waaaaoooow. looks great. But you must have space for such a big and fat muffler. Thats a problem in todays small cars
Bel lavoro
Però non capisco il senso di quel giro di tubi....
thumb down an exhaust video needs a sound clip
Без проверки на звуковой эффект, ВСЯ ВАША РАБОТА СОМНИТЕЛЬНА! ТО БИШЬ ШЛЯПА!!!
Now sound clip on a 🚗
Why you not check sound vedeo upload
Put it on somthing give us a few revs then haha geeeezz
Clip with audio: th-cam.com/video/bWpMys0RjEU/w-d-xo.html
Can you make Lamborghini Aventador svj xhaust sound make please please please please please please please please dear
Darling, you are a bit needy
Car attached this xhaust and start car engine so we check sound
Your subscriber need to check sound
All this fabrication with all this mass has already been done with the same results in a smaller package in the countless aftermarket exhaust industries…this is basically 2 short glass pack mufflers…period !
А где звук
Car attached this xhaust and start car engine so we check sound