You are watching a master at work! Not only in assembling the motor but the attention to detail in the video quality. All the experience throughout all these years. Devin you definitely deserve more subs. 👍
@@ukaszkwiecinski1781 could you explain how he built it bad? I am confused as I've seen you on other comments saying he built it bad but not explaining
Devin, put the stock intake manifold back on. You won’t regret it! It flows incredibly well and you may lose power without it. I have been through enough setups to know. 800-1000whp no issues for peak power up top using the stock intake manifold.
This video was mesmerizing! I'm not into ASMR, now i believe I haven't been because I haven't found the right content. This was amazing Dev. Great Job, makes me feel better that I knew every single step from having learned how on this channel. Thank you!
I would think you would cericoat the entire hot side. Not just to keep it cooler but give it a uniform color. Much nicer looking than wraps and blankets. Of course you could do both. Keep that expensive engine and bay cool.
Hey Devin As a consistent follower and subscriber of your channel for many years. Forgot the year lol. Do remember it wass your dads shop with a subi. Think it wass the forester. Since the red evo x build that after jarred drove or still hass in his fleed im a true member in your YT carreer. I still love your content but think there is much more improvement for you to get out your channel. I personal would like to see more cars driven content on your channel. You have a real serious fleet of amazing cars sitting in storage. Your popularity can make as i belief in. A huge boost by creating more real car driving content in general. I will give an example. do you know DDE (Daily Driven Exotics)? They are huge now like in same period as i follow you. You have the cars and equipment. Please use that for future fun and entertaining content mate. You will serious make me happy with that and i think alot other followers too. Its a writhen rule to know your specific knowledge on the builds lol it only gets a little boring to me as i speak and hope to many others. Its an advice and a hope. Its your decision at the end Hope my words make a little push in any positive direction Keep up your great work your doing well
Devin please loctite those bolts on the intake manifold. I swear mine fell off and ruined the teflon gasket for the plenum and RZCrew can’t even follow through on trying to let me buy new gaskets.
What was the tool you used at the start? Was that to bore out head stud threads for thicker studs? If so is there another tool for the heads to be bored out also?
Why u need a 4p head? For what application? Unless u going big all-motor, you should just get a $200 k20a3 head and have it ported and put a supertech valvetrain kit with a nice cam. Saves a ton of $$
Looks like a dodge engine maybe? Idk I rebuilt one that looked super similar and it was out of a dodge caliber, I forget the year tho lol. beautiful build tho
Are evo engines just old eclipse engines its hard for me to decipher? also i know like a subi Ej 2.5 or a hond k series but when it comes to eveos 😩im stumped
Depends on whether it's a 4g63 or a 4b11. Even if it's a 4g63 it's not exactly an eclipse motor, it got updated substantially, but it would be a later generation of the old eclipse motors.
love the video. just making sure though, crank end play was measured too? and you sure about using that type of gasket on the oil pan? i would imagine high boost/crankcase pressure will blow that thing out in no time
Hey Devin I have an Rsti project that you'd be interested in. It has an 07 wrx drivetrain now and has a ringland failure. Mint 2.5 Rs interior etc etc. How do I contact you to make a sale?
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
The talent in both the engine building and filmmaking aspects of this are mind blowing
there's so much stuff wrong in this video.... he's not very "talented" in building engines.
@@ukaszkwiecinski1781 And who are you sir?
@@ChiefJrod i have my own shop and have 30 years of experience as a mechanic.
@@ukaszkwiecinski1781 I see nothing wrong here.. He measured all the things to the specs..
@@ukaszkwiecinski1781your top playlist on your channel is “Forza Horizon 4 money glitch”. You’re literally 15.😂 “30 years experience”.😂😂😂
That engine is a work of art. Sick video / engine build.
❤❤😂😂🎉🎉😢😢😮😮😅😅😊
❤😂t😢😢 ❤😊😮😢🎉🎉😂❤😂 🎉🎉❤😂😂😂😂😂😂
I love building engines, grew up doing it with my dad, the most tedious but relaxing thing ever.
You are watching a master at work! Not only in assembling the motor but the attention to detail in the video quality. All the experience throughout all these years. Devin you definitely deserve more subs. 👍
he built it so bad... he ain't no master
@@ukaszkwiecinski1781 could you explain how he built it bad? I am confused as I've seen you on other comments saying he built it bad but not explaining
@@G3ck07 hes just a hater
Cheaper to watch you build a motor then me do one hahah. Satisfy 👍
I liked the purple valve cover over the bronze but that manifold looks sick! ☑
Agreed, I really liked the purple accents
i shed a tear watching this beautiful work of art, if that engine could it would be smiling!
Devin deserves every ounce of his success
Man, this is sooo esthetically satisfying
So freaking satisfying
Love when there aren't any words. Not necessary.
Devin, put the stock intake manifold back on. You won’t regret it! It flows incredibly well and you may lose power without it. I have been through enough setups to know.
800-1000whp no issues for peak power up top using the stock intake manifold.
🔥🔥 can’t wait to here it running keep doing your thing on these cars
This video was mesmerizing! I'm not into ASMR, now i believe I haven't been because I haven't found the right content. This was amazing Dev. Great Job, makes me feel better that I knew every single step from having learned how on this channel. Thank you!
I love the huhn solution kits!
man that was a simple but yet sick video on the engine build
Amazing . Excellent Work MR Dev!
Beautiful work
AMSOIL assembly lube for the W! Watching with my 2yr old son. He didnt blink the whole video.
Intelligent wark, Noo one word 👏🏻👏🏻
more content about asmr building engine please. love it
That calmed me down so well, thank you sir 😎👍💯
I love the bronze on the valve cover but idk how I feel about the red intake, maybe a wrinkle black.
Yeah this is really nice to watch
i went from watching a video of someone rebuild an engine in the middle of nowhere with basic tools in the dirt to this. Both master mechanics.
man idk if these are your most watched videos or not but they are great
Next video:
Tearing down the EVO engine....again.
Haha as always
I would think you would cericoat the entire hot side. Not just to keep it cooler but give it a uniform color. Much nicer looking than wraps and blankets. Of course you could do both. Keep that expensive engine and bay cool.
You are the man of the EVO 😊
I now understand why engines are as expensive as they are. There's so much more to it than I thought.
Hey Devin
As a consistent follower and subscriber of your channel for many years. Forgot the year lol. Do remember it wass your dads shop with a subi. Think it wass the forester. Since the red evo x build that after jarred drove or still hass in his fleed im a true member in your YT carreer. I still love your content but think there is much more improvement for you to get out your channel. I personal would like to see more cars driven content on your channel. You have a real serious fleet of amazing cars sitting in storage. Your popularity can make as i belief in. A huge boost by creating more real car driving content in general. I will give an example. do you know DDE (Daily Driven Exotics)? They are huge now like in same period as i follow you. You have the cars and equipment. Please use that for future fun and entertaining content mate. You will serious make me happy with that and i think alot other followers too. Its a writhen rule to know your specific knowledge on the builds lol it only gets a little boring to me as i speak and hope to many others. Its an advice and a hope. Its your decision at the end
Hope my words make a little push in any positive direction
Keep up your great work your doing well
Yep.. I think Devin is just too obsessed with building..
This was Hella awesome to watch
Cool video, no chatter, no unnecessary advertising just a little too short 😅
Very clean job and great video! Thumb 👍
Looks like MAGIC 🔥🔥🔥
That block is the smaller than 1 of my bbc heads! That’s wild. BBC 509 cid 750 hp 740 ft lbs of torque. Makes my boat run in the low 90’s!
çok güzel bilgiler vermişsin Ustam teşekkürler
Watching your Asmr videos before going to sleep knocks me out bro. 😂
Insanely great video
The car ocd mad scientist at work in his zone, clean asf.
I made the same mistake on the first engine rebuild in auto school. 1 piston assembly at a time. Gj
Awesome video Devin
Damn...Devin never fails us.
What a lovely ASMR, such a satisfying content.❤ Keep it up man
executed perfectly !
I can't believe I just searched "ASMR car builds" and a perfect video came up.
Devin can you explain one day all the measurements and how they work together
Great video man ❤
Honestly 12k don’t seem all that bad, looks like an awesome build
Devin please loctite those bolts on the intake manifold. I swear mine fell off and ruined the teflon gasket for the plenum and RZCrew can’t even follow through on trying to let me buy new gaskets.
When’s the yellow evo hitting the dyno?
When it's fixed😂
He posted it 6 days ago
@@blacksta-rLMAO
Love the work ethics.
Nice video man!. Quick question thou, was there a reason why you changed your assembly lube?
I liked it no talking just working
Great work very skill full 👏 👌 👍
What was the tool you used at the start? Was that to bore out head stud threads for thicker studs? If so is there another tool for the heads to be bored out also?
Thats gorgeous
You are my inspiration for real❤ my respect
thanks for sharing that. that was epic.
So relaxing. Not sure why but it is lol
my type of asmr
Colour combo 💯💯💯👌🏾👌🏾👌🏾🔥🔥🔥😍😍😍😍
Thank you brother. This video gave me life lol
Nice work.
Please people like and subscribe this guy is an absolute legend and his work is amazing. Every build is perfect.
Where did you learn how to build your own engines? This is a goal of mine to learn how from start to finish
The Mastery in showcase
Devin does it best
Did oem bearings in beginning not fit the spec u we’re going for or why did u replace the not checked ones
Devin = Goated
Hi Devin, where did you learn all these things, are you a mechanic or did you learn by yourself ? Your brother and you have alot of skills
Looks good.
Very Nice
Mentally Soothing .......
what was the first thread for? did it had a broken thread or bolt in it?
I'm also wondering
Looks like they were lining up that tool so he could drill out the head for larger head studs.
Looks like a nice engine to play with that ❤
my engine should be done around november too. just need a little bit more money to buy a 4p cnc k20 head.
Why u need a 4p head? For what application? Unless u going big all-motor, you should just get a $200 k20a3 head and have it ported and put a supertech valvetrain kit with a nice cam. Saves a ton of $$
@@JonHop1 i already have a k24a2 bored to 88mm fully built. i have ferrera valves and everything already as well
It was great ❤
12k for a 4 cylinder 😢
I love the video though 🥹🥹so satisfying
i think i’m gonna be spending around the same. i’m gonna build a j35, just bought my acura tl type s with high mileage
more likely around $9k
Looks like a dodge engine maybe? Idk I rebuilt one that looked super similar and it was out of a dodge caliber, I forget the year tho lol. beautiful build tho
wow...inspirational...
thank you
Are evo engines just old eclipse engines its hard for me to decipher? also i know like a subi Ej 2.5 or a hond k series but when it comes to eveos 😩im stumped
Depends on whether it's a 4g63 or a 4b11. Even if it's a 4g63 it's not exactly an eclipse motor, it got updated substantially, but it would be a later generation of the old eclipse motors.
Devin is too damn impressive😮💨✨
Hey Devin Got any turbos for sale for an evo x?
Is there a list of bits used aftermarket stuff etc
PERFECT ❤
Sweet!!
My favourite vids
Links to thise tools would be nice.
Hey Devin, do you have a spare short block or long block for sale? I have a 2015 Subaru WRX. My motor blew.
Do yourself a favor and just buy an evo
love the video. just making sure though, crank end play was measured too? and you sure about using that type of gasket on the oil pan? i would imagine high boost/crankcase pressure will blow that thing out in no time
Where’s the other half? 😂 just kidding people, relax…. Those main caps look like they could handle a thousand HP shot of NOS.
Sheeeesshhhh wat a beauty!!!💯
nice
Hey Devin I have an Rsti project that you'd be interested in. It has an 07 wrx drivetrain now and has a ringland failure. Mint 2.5 Rs interior etc etc. How do I contact you to make a sale?
What is the point of the paint pen on the bolts? (This is a lead to my real question, btw)
He torques the bolt to a certain foot lbs for example 30 flbs and then tighten to 90 degrees.
Bling bling. Pretty sick.
what happened to the awd type r
Im curious why he drilled and tapped that hole can anyone explain that to me
Evo X needs a k24! 😆