You did an amazing job! What are the machines you use to apply the oca and cure it? I'm going to try and repair my Google Pixel 6 using the ECdiy repair kit, you have any tips for me? Greets Bart
Hey, im growing more confident in my phone repairing. Might try out to replace glass only on a phone soon. What are the machines at 11:30 and 11:45? Are they necessary for a good repair?
Hey! For OLED displays machines are not necessary, then You have to use LOCA glue to put new glass. But for LCD displays, iPad displays machines are necessary. Then effect is as factory 😁
Hello. I wanted to leave a question on Jerry mobile, but I couldn't use Facebook. I want to replace the frontglass on my ipad. Please let me know the price
Hi I have one question, if I was to do this without a laminating machine and instead stick the new glass around the sides of the e screen then clamp it for temporary use will I face any problems
hey Jerry, nice Video, very nice explanation. I just stumbled upon this and i need to ask what are the two little metal "plates" for in minute 14.00? Are they like magnets and what is their purpose? Are they neccessary, cuz i think i lost mine when the screen broke and if they are important may i ask the name of them?
Good video jerry 👍 I have one question, do you know why debubbler does not remove all bubbles for me? I set it to 50C for 15 minutes & removes many bubbles but always has some left. Any suggestions my bro? 😔
@@JerryMobilePL It happens on both screens my bro. My machine is TBK-408A. It measures in kpa the vacuum settings. It only goes up to 98 kpa. Anything above that my machine does not support :(
@@f_x9771 vacuum 98 is ok. Question is if themeasurer shows it correctly. Probably yes so problem can be in debubbler (pressure lower than 6bar) or lamination pressure is too low. OCA glue is very important too- I use only Mitsubishi and I never has a problem. About different noname oca.. I has the same problems like You
@@JerryMobilePL You were right Jerry, I did higher pressure & debubbler work ok now. But problem is, bubbles are removed but in 1 or 2 hours small bubbles appear in corners, what am I doing wrong? 😔
Apple make big shit.Between glass and aluminium frame must be rubber absorber,like for a Razer blade laptops.I get small hit and glass for Apple was brouken,but more bigger hit for my Razer and display stay still live.
Great job! Wish there were more repair shop like yours in europe!
i am here..what ki d of repair service u need...
One of the few times I've enjoyed a soundtrack on TH-cam video lol Great job sir
You did an amazing job! What are the machines you use to apply the oca and cure it?
I'm going to try and repair my Google Pixel 6 using the ECdiy repair kit, you have any tips for me?
Greets Bart
After changing the display, isn't there a phenomenon where the line shakes on the diagonal when using the Apple pencil?
Amazing skill
wow, some great work mate.
Hey, im growing more confident in my phone repairing. Might try out to replace glass only on a phone soon. What are the machines at 11:30 and 11:45? Are they necessary for a good repair?
Hey! For OLED displays machines are not necessary, then You have to use LOCA glue to put new glass. But for LCD displays, iPad displays machines are necessary. Then effect is as factory 😁
Wish this guy was in America smh. Apple said I gotta pay 700 to fix this thing and no one else will repair it
Whats that tool he was using that shakes
Hello. I wanted to leave a question on Jerry mobile, but I couldn't use Facebook. I want to replace the frontglass on my ipad. Please let me know the price
Hi can you repost your equipment used? Most links are broken. Thanks!
Good work sir 😊
Great work bro
Where did you get just the glass? Only ones I've found have digotizers too
I bought here :)
s.click.aliexpress.com/e/_olIDjK9
is it possible to do it without that pressure machine in home?
lol
NO
Want my iPad Pro 11inch lcd screen cleaning.
can i ask one question?ipad pro 2021 m1 lcd is not same with ipad pro 2020/2018?
It's not 😏 2021 has a new technology backlight and different connectors
@@JerryMobilePL if glass only changed, m1 will same with 2020, thank for replay, i not yet replacing m1,so i can't know.please sir
Lots of time (labor) and equipment cost. How many to break even ?
What is the device you use to get rid of the glue?
So in other words we can’t just replace it lol
Classic Apple L
You can buy it with the lcd placed already it’s like $250 and way easier to replace
@@basicknowledge7607where i can find it a new one???
@@devisalsyou think its possible on other devices? Lmao classic kid
Hello! Do you know if iPad Pro 12.9 4th gen glass is compatible with 5th version?
Hi! 3 and 4gen is compatible. 5th is different 😉
Can I send youmy 12,9" ipad screen with the new digitizer and you fix it for me? I live in Spain. How much it can cost to fix it?
i can fix it for u..please tell me more about ur device
@@Mr1Mine it is 12,9" ipad pro first generation
ok..i will fix it for u no problem. Dear:)@@mesopotamialover905
Ooo ... 🙂good job
Hi I have one question, if I was to do this without a laminating machine and instead stick the new glass around the sides of the e screen then clamp it for temporary use will I face any problems
Hi! Hmmm.. I think it should work, but remember that after 2-3 months You will have a dirts under the glass. But it should work, test before glueing 😁
@@JerryMobilePL ok thank you
How much would you charge for this repair?
Good job ...👌
Great video as always
hey Jerry, nice Video, very nice explanation.
I just stumbled upon this and i need to ask what are the two little metal "plates" for in minute 14.00?
Are they like magnets and what is their purpose?
Are they neccessary, cuz i think i lost mine when the screen broke and if they are important may i ask the name of them?
im not a expert but i think the are magnets for pen to attach
good job. can u tell me temp?
I need to replace my A2378 screen and LCD 5th gen 12.9 how much would it be if I bought the parts off you? Or if you did it for me?
Of course we can repair for You, please message on fb I will send you options
@@JerryMobilePL please, I need to fix my ipad pro 12.9 a2069
Good job
Can vacuuming the type C port harm the screen and cause it to flicker? I mean, is it even possible?
what happened with touch screen if you can use hand but not apple pencil?
One of flex tapes is damaged. It's needed to change touch panel
How much cost
Music konsa hai
Jarek kozak kozak
Which music
Take you on by James mercy ft Philosofie
Można prosić o dłuższe i częstsze filmy?
Można, ale wszystko w miarę możliwości 😄 nagrywam kiedy tylko mam czas
@@JerryMobilePL Powiedz dla Piotrka, żeby dał wytchnąć, bo od 7 miesięcy nie ma filmu. :(
@@marcin-_ już się buduje nowy PC więc zaniedługo będą 😁
The Music .... Spoiled .. the educational aspects..of the Video ..... Couldn't Listen to it any longer. Euuuuw ..🌟🙏🏼
❤️❤️❤️
Good video jerry 👍
I have one question, do you know why debubbler does not remove all bubbles for me? I set it to 50C for 15 minutes & removes many bubbles but always has some left. Any suggestions my bro? 😔
Thanks 😁
First please tell me, is it on straight and curved screens, or only on the curved? How much bar pressure You have on debubbler?
@@JerryMobilePL It happens on both screens my bro. My machine is TBK-408A. It measures in kpa the vacuum settings. It only goes up to 98 kpa. Anything above that my machine does not support :(
@@f_x9771 vacuum 98 is ok. Question is if themeasurer shows it correctly. Probably yes so problem can be in debubbler (pressure lower than 6bar) or lamination pressure is too low. OCA glue is very important too- I use only Mitsubishi and I never has a problem. About different noname oca.. I has the same problems like You
@@JerryMobilePL Thank you so much for responding to me brother. Where can I buy mitsubishi do you know? Thanks again for help 🙏
@@JerryMobilePL You were right Jerry, I did higher pressure & debubbler work ok now. But problem is, bubbles are removed but in 1 or 2 hours small bubbles appear in corners, what am I doing wrong? 😔
❤️
Apple make big shit.Between glass and aluminium frame must be rubber absorber,like for a Razer blade laptops.I get small hit and glass for Apple was brouken,but more bigger hit for my Razer and display stay still live.
So basically, we’re f*cked.
VEryGood. BEAUTIFUL