Rebuilding my Trx4 (part 1) (the transmission)
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Thank you guys for watching! I hope this video helped you out. If you have any questions, please leave them in the comments!
Tools you will need:
1. 7mm wrench or socket
2. allen keys
3. brush to clean off dirt
4. brake cleaner ] mix
5. couple drops of olive oil] mix
6. container to keep your mix* in
7. Needle Nose Pliers
8. paper towels (blue shop rags work best)
9. a allen key or something to help tighten the clutch
-------------------------------------------------------------------------------------------------------------------
Parts you need to complete this project:
Traxxas Silicone Grease:
www.hobbytown....
If you prefer:
Traxxas White Lithium Grease:
www.hobbytown....
------------------------------------------------------------------------------------------------------------------
Traxxas TRX-4 Slipper Clutch Rebuild Kit: www.hobbytown....
You might also need:
Traxxas TRX-4 spur gear:
www.hobbytown....
-------------------------------------------------------------------------------------------------------------------
Traxxas TRX-4 "Sport" FastEddy bearing kit:
www.hobbytown....
or
Traxxas TRX-4 FastEddy bearing kit:
www.fasteddybe...
--------------------------------------------------------------------------------------------------------------------
Great detail, this helped me thanks!
Great video! Man, I remember when I didn’t have carpal tunnel… 😢 watching you wrench those screws makes my hands hurt lol!
Aw man! That is to bad. I hope I don't get carpal tunnel. Both my Dad and Aunt have it and they say it is painful.
Awesome video bro!)🤩💥💯👍👏
Great work! 👍
Thanks!
Part 2 ?
Yeah, someday. Lol 😬
I always love this videos, i do that a couple of month ago, i think i will do it again
🤩💥💯👍👏
Super helpful video! I have to tear mine Trx4 transmission apart as very grindy sounding....already did the front and rear diffs...I got the fast eddy bearings but one for my non sport Trx4 thanks!
Glad it helped
Hello, great video!, on bearing removal, I can usually get away with using small needle nose pliers & some oil then opening them in the bearing hole & wiggle a little at a time can sometimes work well if you plan on reusing good bearings otherwise other methods are good too. 😃
Thank you! Yeah those bearings are hard to remove!
Could tell me where could I buy a screw like this?
Here is a hardware kit for the trx4, (www.hobbytown.com/traxxas-trx4-traxx-stainless-steel-hardware-kit-black-tra8894/p1156605 ) it should have all the screws for the trx4, otherwise you could measure and buy the missing ones separately.
@@rcandlegos thanks. I can't find long hex screws only noses am finding. Thanks again
I highly recommend the clutch pad delete I have them on my TRX4 and it works amazing with them