ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
A plastic Shopper Machine That Suffered a lot of Damage, Broke a Bearing and Had To Replace it
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2022
- A plastic Shopper Machine That Suffered a lot of Damage, Broke a Bearing and Had To Replace it
#amazing
#Crusher
#plastic
#Machine
#plasticCrusher
@mimechanics1019
Удивительно что на шлангах гидравлика колпачки защитные) обычно они все достают и ставят из песка))
6:47. Good thing they wear steel toes safety sandals.
No girls on that job
Hard working genies . Long live all with good heath and with the needy wealth by the grace of the Almighty. Mother is goddess and father is god, Respect Females.
Damn, was just waiting for those toes to get smashed.
Good work. Hard work. Mission accomplished. In our area (Austria, Germany...) the police would have appeared and arrested the chief and questioned the workers - why do you not wear iron-armored shoes, no hard hats, no this and no that....Hopefully all these guys stay safe and do not suffer serious harms on this kind of heavy duty tasks.... :)
bonjour de France BRAVO SUPER !!!!!!!
Так всё хорошо и уверенно сделали с подручными средствами 😊👏👍✊
What a hard working people , you are unbelievable
God bless you all 👍🌺🌺
Scary when most car parts come from countries like this
And so you don't get scared, what do you suggest, that all the parts be manufactured in Germany, Switzerland or in the USA, 😖 now tell me the cost of the car 💰 😂
@@jimydoolittle3129 ...EV costs $65,000 ... hardly chump change
who's cars, not European cars?
hahaha you all sound like Minions......love the videos guys keep them coming ,,,,my wife laughts when she hears your voices which are a nice touch
Awesome 👍 engineering legend
ČES VAŠÍ PRÁCI! TO UNÁS TAKOVÉ VĚCI DĚLAJÍ JEN STROJE A ROBOTY!
Safety sandals are required!
Yes and brown dirtied pajamas too apparently 🤔 Oh Well it's a living...
@@thehulkamaniabrother2.089 в гараже в России в кузове универсал и стоимость по сравнению код подразделения по
@@user-cc3dt1nj7e Cant understand you, I speak english not gibberish...🤷♀️
Great work Men 👍🏻❤️
dude wearing a mask to protect himself.. i find that funniest of all
Might be worth doing both sides..
Bagus video nya 👍
Lmao when the one guy let his side of the chain go slack and it dropped
I call that, "Bigger Hammer Technology"
Good to see there wearing there steel capped sandals 🤣🤣
Good setup on the press but the whole thing is a death trap. Look at the welds at the bottom of the pillars they are cracked open.
It wasn’t a “good setup” on the press. They set the bearing by putting pressure on the inner race. It’ll fail long before it should.
That race didn’t want to come off, great job guys, you do a lot more with a lot less than most
amazing how every step seems to increase the likelihood of an accident. Given the weights, pressures and forces in general involved in all of this, there seems to be a lot of reliance on stuff just balancing and not buckling and being launched by hydraulic rams.
Serious injuries are very common.
They are dangerous. Can remember catching one once as it let go at about shoulder height thankfully it had lost most of it's energy by the time it got to me. They can certainly be frightening when something goes suddenly...
Osha had the day off
Buen trabajo...!!!🇦🇷🇦🇷🇦🇷
لو كانت عجلات قطار لسافرت عبرهما بكل امان اشكركم على جهدكم وبراعتكم بابسط ما تملكون صنعتم شيءا عظيم.
Trying to find out exactly what a “Plastic Shopper” machine is! Some kind of a robot that does your shopping for plastics? I’m confused.
Buen trabajo, 👍
What a poor job for the bearing housing.
People must have inhaled a lot of Helium before they talked.
This video brought to you by sandals the only Indian approved work shoe.
how long did it take to get it on the bench at the start..
Wooho - we built a deathtrap
Good job men 👏👍
Ever considered split bearings so you don't have to go through all that each time?
Or come to that - a couple of donkeys and air or electric powered chain-blocks. 🤣
QUE HORGULLO DE GENTE PROFESIONAL DE DONDE SEAN DESDE MÉXICO EN EL ESTADO DE LA VERA CRUZ Y CAPITAL XALAPA UN ABRAZO SON BIEN CHIGONES ME CAE ...
🦈🦅🇲🇽🦅🦈
Innovative
Mobile phones can be afforded, but safety shoes, gloves and glasses are not available in the country.
I never thought of that but you are right can afford a mobile phone to record the work but won't spend money on safety equipment a bit stupid if you ask me
looks like a fellow need to take some time to build himself a small forklift
Bet he won't ever ware sandals again if he drops that on his toes. Haha
Install bearings with a hammer while sitting on the table of a press? Seat the outer ring by pressing the inner ring? Essentially using the bearings themselves to transfer the load? SMH
POOR SERVICE . BEARING PUSHED WRONG. IT HAD TO BE PUSHED BY THE INTERNAL CASING.💩💩
Look at safety do you think they care they still in the 1700s
I m big Fan Brother👌
Nice Video
Thank you 🥰❤️
The solution to everything seems to be a BFH! At least he did a good job packing that bearing.
I think that's chopper machine- the guys wives are the shopper machines.
What TF is a “plastic shopper machine”?!?
Love those totectors 🤣
Good 👍👍
Надо было и с другой стороны подшипники вскрыть и свежей смазкой забить
Aaarh... Royal Enfield crankshaft...?
Т Б зашкаливает.В любую минуту пораниться ,что два пальца об асфальт. Даже убить может отскок.
Вы думаете в россии с тб всё хорошо? Тут не намного с этим лучше.
Skill over tools
One thing these people believe is that everything is possible if you just hit it harder.
Where there is a will, there Is a way! 😁👍🏻🇦🇺
Push the grease into the bearing like packing it stop smearing it
Thanks you my friends!
Dry tell ppl running machine to grease there shit once in awhile lol
20:00 - That bearing housing is toast, that track that those destroyed bearings wore into it will ensure its failure if it is ever moved hard laterally. I wouldnt have reused it, but you gotta do what you gotta do I guess.
I wonder what the repair warranty is?
If they had a crane that was used to put the finished part into the customer's truck, why didn't they use the crane instead of the chain hoists at the beginning to put the axle up on the platform with the press??
You had to hire the crane it cost money
It would be interesting to know how much the repairs cost.
Costs two feed when they drop it
Costs 3-pretty goats plus parts.
Sped up like this, these guys sound like the minions, from the Despicable Me movies.
advance technique and modern tools...
No idiots were killed in the making of this video.
You guys need a gear ⚙️ puller. do some research on the internet get some ideas and you can make some for the jobs you do 🤔🤔🤔😁
How do you make chopper from plastic?
And other than a motorcycle,
What is chopper?
Wow
Half the sh*t these guys "fix" is just random junk yard finds.. YT where the money at
Nice teamwork!
👍👍
如此工作環境,如此工作人員,穿着拖鞋,油迹斑斑衣服,應是很長時間没有洗,真的太那個了。其維修質素存疑。
印度是世界上摔戰機最多的國家,高峰時5個月掉6架戰機。
A fine job guys. A cold drink for the crew. Be well.
Too painful to watch, those guys need to buy a forklift.
In Pakistan is not that easy 😳
Сгущенки вареной захотелось
Maaşallah
I know damn well that Hyundai tailgate would of held it in place don’t need all that rope frew fraw
When I asked the Almighty for peace,
The Almighty showed me the Earthians living among religious menace,
When I asked the Almighty for strength,
The Almighty gave me many problems to face.
When I asked the Almighty for happiness,
The Almighty showed me the sufferings of poor.
When I asked the Almighty which religion to follow,
The Almighty showed me madness of religious slaves.
When I asked the Almighty for wealth,
The Almighty showed me Politicians and god-men.
When I asked the Almighty for favour,
The Almighty showed me corruptive Earthians.
When I asked the Almighty to save the Earthians from distress.
The Almighty blessed the Earthians to live with love and affection.
Finally, the Almighty gave me nothing or anything,
But the Almighty showed me the right path to live without religious menace.
RESPECT FEMALES
4 hours ,later!!!!
Good wrok g
Thank you Awan g
I don't need to shop plastic
Жесть.
Why not take the bearing housing off and cut the old bearing off .???
They did.
fácil
All of that hard, dangerous, improper work just to replace a junk bearing with another junk bearing. So dumb.
IMAGINACION NO LES FALTA Y UN DE DE COJONES TAMBIEN DE VERDAD TENDRIAN QUE ORGANIZAR UN TOUR PARA JUBILADOS OCIDENTALES SOLO PARA VER DE LA MANERA QUE TRABAJAN
this i saw in another video, also: repeatet
MIC--KEY---MOUSE