Husqvarna AWD Axle Bearing Replacement
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Check it out!
In today's video we're working on a Husqvarna AWD Self Propelled lawn mower that needs the axle bearings replaced.
The issue is that Husqvarna only lists the entire bracket itself in their parts diagram (complete with bearing) and they don't supply the part number for just the bearing itself.
This not only created a backorder of the bracket, but also forces customers to purchase a much more expensive component, when they can simply remove the worn bearing, and replace it with a new one.
The part number for the newer style replacement axle bearing;
Husqvarna: 587070202
This is the superseded part number that now has a rubber seal on the outside of the bearing, to prevent water & debris from going in.
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
Instagram: ELMN80R
/ eliminatorperformance
/ elmn80r
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks - แนวปฏิบัติและการใช้ชีวิต
Shout-out to M. Gomez who found a part number for just the bearing with rubber seals, you can press them out of that retainer and just purchase the bearing itself P/N: 104-8699
Once I found that Amazon listing of the bearing and retainer, I googled that part number (587070201) and then found a listing on eReplacementParts website that showed it had been superceded to the 587070202 with a newer style RS rubber sealed bearing.
Additionally, eReplacementParts has a great video on removing this wheel assembly on a very similar mower if anyone would like to watch it. Like I said though, it's very simple.
m.th-cam.com/video/kvlQNygUNYw/w-d-xo.html
I sort of wish I'd seen this video a month ago. I just finished an epic adventure with a Craftsman (AYP) front wheel drive problem. This bearing was shown as a separate part # on the parts diagrams. It was a bear to get the circlip back on the bearing in the adjuster plate. No O-rings on this Craftsman version, but a very stiff cupped washer that needed to get compressed in my vice and with c-clamps. I videoed the entire rambling escapade. Where I ended up was not where I intended on this repair.
I get a giggle on those eReplacment and other similar videos. Swapping out new parts on brand new machines: 1/2 the fun is slogging through filthy, seized, bent, rusted, and corroded bits and parts.
Thanks for the great videos.
I used a socket against the clip in a vice and it set itself in nicely!
This was my mower in this video that Jake repaired. I can't say enough about Jake's abilities and Knowledge. Nice to find an honest mechanic and he is reasonably priced to boot. Thanks Jake.
Thanks for watching!
Dude you're a lifesaver. I couldn't find the OEM bearings in stock anywhere but the 02 ones are far superior. Glad I found this video, you saved me from a lot of future headaches
Thanks for watching, glad it helped!
Beautiful explanation and installation 👏!
Great info on the bearing! I have seen a couple that the end of the axle was just about sheared off it was so worn. Thanks for sharing.
Thanks for watching!
You're a lifesaver. Thank you so much for the valuable info.
Super work getting that bearing number, sure you were happy that it worked out well. Feel bad for the 370 back ordered people when they see this video and realise they could have just replaced the bearing ONLY IF THEY FOUND THE PART NUMBER!
Another informative video my EP. THANK YOU FOR THE INFORMATION AND TAKING THE TIME TO SHOW US.
Thanks for watching!
Thanks for the tip!
Hello Elininator, I used this part # for the front bearing. LC221A model. The adjusters are different than the one in this video. Had to shim it to take the slip out of the adjuster assembly but it did work out. Thanks!
Excellent my friend! Just saved me some money. Well done!
Glad it helped, thanks for watching!
Great video.
Thank you VERY MUCH for the video, again!
Thanks for watching!
I did this repair yesterday on a craftsman "ez walk" front wheel drive with the briggs platinum series engine. I used the bearing part # 421836 and it worked well. It's the sealed bearing.
Thanks for watching!
Thank You very very much for this information and knowledge that will save us money which we all need to do now…😊😊😊
Thanks for watching!
Wery good info, sealed befaring is a must Have, but maybe they could put in a bit lager befaring that take more beating
Great info! Thanks!
Thanks for watching!
Very good!
Dude ! Thank you ! 👊🏼👊🏼👊🏼
Good info!!! Thanks!!!!
Thanks for watching!
Thank you so much.
Great info and good job finding the better bearing. I have a loose lower handle and can't figure out how to tighten it. Have you got a video on this? If not can you make one please? There is no clear place to tighten.
Thanks for sharing.
Thanks for watching!
Sucks trying to get that snap ring back on! Tried without the rubber seal and it worked but height adjustment kept slipping off due to too much slop and slipped off the bottom tab repeatedly. Got the assembly in the freezer now. Fingers crossed I'll get it on
Thanks 🙏👍🏽
I was wondering if the axle could be removed for welding and then put on a lathe to turn down to spec? Just a thought.
Yes absolutely
Is that the same bearing for the front wheels ?
WOuld I use that same bearing for the 7021 front wheel?
I have the HU775BBC and I notice it popping and grinding and I took the wheels off and noticed that the wheel pressed in bearing seem sloppy and with the wheels on they have a lot of play and movement and I like to know what bearings I need to replace them? The smaller gears on the body seem ok so it's the wheels and play making them skip and slip
I have the 800 someone gave me (HU800AWDH) He said it was locked up but turning the blade and pulling the cord it fired up and then the belt split. It was really worn down thin so watching videos and taking off covers, I found my problem is not the bearings where you were focusing on behind the 14 tooth pinion but the bearings in the wheel( mine is the larger rear wheel set up) and on the wheel mount shaft. It seems like there might be more than one on that alone. I had to press out (knock) the wheel bearing out and no ball bearings or roller bearings were left-the part evidently corroded apart. The parts list for this one is just like the one you showed and no separate bearings listed for what I need.
I did buy a new Sunbelt belt for $20 but have not installed. I think it would drive if I installed it but the bearings are holding me back from wanting to put the belt on just yet. The wheels are sloppy lose with the issue. Boy I do have some dabbling time in this but almost thinking of throwing in the towel. Typed in the new superseded bearing # and brought up the old one by the way and closer watching your video did not make me think I was looking at what I really needed anyway but great job with what you were showing! Thanks and thanks if you reply too!
Is it cost effective to replace the rear axle on a Husqvarna riding mower?
Great info . I have one of these mowers . I should of stayed with a Honda . Not very happy with this mechine. Thanks
Great video with some great information. How did you find out about 02 bearing part number?
Once I had the Amazon listing with the picture of that bearing, I googled that part number (587070201) and then found a listing on another parts website that showed it had been superceded to the 587070202 with a newer style RS rubber sealed bearing
@@EliminatorPerformance ok thanks for the info!
What is the bearing that sits inside the rear wheels? I have a hu775bbc rear wheel drive and my wheels are making a popping noises like it's skipping my wheels seem to be really loose is this bearing going to take care of the problem with the bearing in the side of the wheels?. I seem to ask a question before I never got an answer
What kind of snap rings should I get mine are gone. But thanks for the video.
I'm not sure, you might have to call Husqvarna
@@EliminatorPerformance thanks dude this method works good and a whole lot cheaper then getting the whole assembly(if you could find one) I broke the tip of one of the snap rings but it still works fine. Thanks again
Great video !! I assume its safe to say "587070202" bearing is the same on all 4 corners of the AWD mower? Front right bearing is my issue. Thanks in advance.
Isn't these bearing pressed In and not just secured with a "C'" clip?
Four wheel drive on a push mower just seems like overkill to me. 👍👍
They're great on hills though!
It's the best idea ever for me. My front yard runs downhill so when mowing upward it makes it much easier on the legs. I have the HU800AWD and have been using it for over 8 years now.
@@charliekilo3 yea same with my customer here, huge hill on his yard, needs the 4 wheel drive!
Do you know the part number for the oring?
I believe it's a 532197480 but please do some research as I'm not positive because it doesn't list these parts specifically.
@@EliminatorPerformance TY for replying EP.
@@EliminatorPerformance That is correct p/n for o'ring
@@EliminatorPerformance They are not cheap.
@@EliminatorPerformance Just found out you can just replace the bearing on the bushing EP. I had some of the ones w/o the seal. Pressed old one out and new one in. You can get the ones with the seals. Save you customer some money. Try one out to see if it works for you. Will help you move more mowers requiring this repair. Will send you p/n.
I used Honda bearings, part #91056-VL0-B00
AWESOME INFORMATION! Thanks so much. I was lucky to find the answer I needed! Thanks again. Keep up the great work. garybahrain1
Thanks Gary!