Stan's Neo Front Hub Service

Video guide for disassembly, bearing replacement, and reassembly of Neo and Neo Ultimate Front Hubs
==============
What you will need:
Smooth-jawed pliers or an axle vise
Blind bearing puller
Hammer
Punch
Bearing press with appropriate drifts
Small flat-tipped screwdriver
Assembly grease
Freehub grease
Cassette tool
Chain whip
Toothbrush
Gloves
================
Remove the endcaps. SealLock endcaps are designed with a special directional seal to lock into place. If your endcaps too difficult to remove by hand, you may use an axle vise or smooth-jawed pliers to remove them
Insert 15mm Sealed Bearing Extractor into one of the freehub bearings. Tap Extractor and bearing out of hub shell using punch and hammer. Perform this step over a rag as the bearing, extractor, and inner axle sleeve will fall from the hub shell when the bearing is removed.
================

[@craigdaugherty9891]

How are you getting the inner axle spacer to line up straight?

[@thrashstronaut]

When you do the entire replacement with an old socket set, a screw driver and a vice...

[@partypartida]

Are your neo hubs still falling apart? I've heard horror stories, but I'm a fool and still want to buy a wheelset.