I really like those lights Steve. I had them installed on my 2021 Road Glide Special last year at Sturgis. Stupid easy to install. Thanks for all your video's.
What if I get left turn hyper flash on the dash only, and it flashes normally for about 5 seconds then starts hyper flashing. I’ve tried the reset several times.
@@2wheeltommy996 generally this happens when you are mixing LED and incadescent bulbs. The ECM doesn't know what you want...a incadescent bulb draws 2.1 amps and an LED typically draws .2 to .3 amps. So if you have incadescents on the rear of the bike you need to change those to LED. Also with 17 and newer bikes we have found that doing the ECM re learn is better with the bike actually running and not just "on" and it may still take several tries to get it to relearn for LED.
@@sikbaggers thanks, I have all LED’s, and did both on and off resets. 2 days ago I installed more LED’s in the bag fender holes/slots, and the additional power draw must have fixed it. No hyper flashing anymore. Thank you for your time.
i have a question: these daylights how can they burn if you don't turn on the blinker ? because my bulb only has 1 connector at the back ? (europe bike) i have the 1156 socket in my bike , then i think tis is not possible for my bike ?
Those lights are looking badass Steve!!!
thank you toby!
I was going to use custom dynamics but after this vid I’m sold on Ciro
Thanks for choosing Ciro! We appreciate your support!
sorry for the late reply, catching up from Sturgis...but you wont be disappointed! Im sure you have them by now..they are amazing!
Your right Steven I have them on my CVO streetglide and love them! Your channel is the best!
Another winner. Thank you sir!
sorry for the delay, catching up from our Sturgis trip ..thank you for checking it out Carl!
I really like those lights Steve. I had them installed on my 2021 Road Glide Special last year at Sturgis. Stupid easy to install.
Thanks for all your video's.
sorry for the late reply, catching up from Sturgis...but thank you Mark..yeah super easy to do...and they look amazing
Man I like that … ! Great video!
Thank you David!
Great video Steve!!
thank you Jamey!
Great information. Thanks again
sorry for the late reply, catching up from Sturgis... youre very welcome!
I’m sold looks great
thats awesome...sorry for the late reply sir...just catching up from the sturgis trip!
Nice video Steve always enjoy watching your videos…….😀
thank you jim!
These will look good on my denim RGS
yes sir...i love them with the smoked lenses!
Great Video! Steve thank you sir!
thank you! grateful that the video helped!
Great video Steve! Can you convince Ciro to make a headlight similar to the fang turn signals for the newer Roadglide?
Hi Keith, we appreciate your feedback and will pass it along to our design team!
sorry for the delay, catching up from our Sturgis trip...but that would be awesome!
On ciro website it says for dual filament bulb or 14 up cvo, I'm assuming my 2021 flhtk is dual filament fitment since it's not a cvo? Lol
Hi Jesse, you're correct, 2021 flhtk is dual filament so these will work with your bike!
@@ciro3d_goldstrike3d thank you for the reply, you got a customer out of it
@@jessemeyer1985 thank you very much, we appreciate your business and support!
Do they have it for road glides
Hi Alton, yes we do! Visit the link in the description of this video and it will take you straight to the product page with the fitment information!
😎👍
thank you Darren
What happened to your video about Sturgis wasn't it supposed to air on 22 Aug?
yes im sorry we postponed it til later this week due to the t shirt order we had going out
Do the make them for 2003 Heritage Softail with Is bullet lights.😎
sorry for the delay, catching up from our Sturgis trip but no not at this time...sorry
Dammit Steve you just cost me $300! I was on the fence about these now I've got to get them.
ah man they are nice!! really cleaned up the front signals and the smoke lens is awesome...not to dark ...just right.
They'll be here Saturday. Can't wait to get them on.
What if I get left turn hyper flash on the dash only, and it flashes normally for about 5 seconds then starts hyper flashing. I’ve tried the reset several times.
what year is your bike sir?
@@sikbaggers 2021
@@2wheeltommy996 generally this happens when you are mixing LED and incadescent bulbs. The ECM doesn't know what you want...a incadescent bulb draws 2.1 amps and an LED typically draws .2 to .3 amps. So if you have incadescents on the rear of the bike you need to change those to LED. Also with 17 and newer bikes we have found that doing the ECM re learn is better with the bike actually running and not just "on" and it may still take several tries to get it to relearn for LED.
@@sikbaggers thanks, I have all LED’s, and did both on and off resets. 2 days ago I installed more LED’s in the bag fender holes/slots, and the additional power draw must have fixed it. No hyper flashing anymore. Thank you for your time.
i have a question: these daylights how can they burn if you don't turn on the blinker ? because my bulb only has 1 connector at the back ? (europe bike) i have the 1156 socket in my bike , then i think tis is not possible for my bike ?
A 1156 bulb is a single action bulb and a 1157 is dual action as in run/turn. If your bike is 1156 then these will not operate.
@@sikbaggers oke thnx i have te road glide anniversary
@@sikbaggershi...does ciro sell any adapter or anything to change the the 1156 to 1157?
@@218Hisham Call Custom Dynamics and ask them about thier Triple Play Moduale. Let them know what your trying to do and they can help you.