How to make a crucible

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 พ.ย. 2024

ความคิดเห็น • 169

  • @Shawn47
    @Shawn47 3 ปีที่แล้ว +14

    Very cool use of cement and lime. Normally when I buy cement and lime it's because I'm trying to disappear a body.

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +5

      Thanks mate I really appreciate you turning up to the premier and leaving a great comment 🤠😎💛👍

    • @manguydude287
      @manguydude287 3 ปีที่แล้ว +3

      🤣🤣😭👍

    • @silverkeys
      @silverkeys 3 ปีที่แล้ว +1

      I think the other trick to hiding one is to not talk about it but that might just be my rule. *shrugs * lol

    • @Shawn47
      @Shawn47 3 ปีที่แล้ว

      @@silverkeys To each their own!

    • @silverkeys
      @silverkeys 3 ปีที่แล้ว +1

      @@Shawn47 Here we have wolves and bears and more so that helps to dispose of waste. Lime for the loo. LOL

  • @salboy1997
    @salboy1997 3 ปีที่แล้ว +6

    You have done our community a great service. Thank you sir!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      You are very welcome I’m glad you are getting something out of my videos thank you for the feedback I really appreciate it🤠😎💛👍

  • @WildWestStacker
    @WildWestStacker 3 ปีที่แล้ว +6

    Excellent video. I never knew it could be so cheap to make a crucible. Thanks for the info 4nines Fine! 😎 👍🏽 🤠

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Thanks very much mate I really appreciate you turning up to the premier and leaving a awesome comment 🤠💛😎👍

  • @CashAndCoinsYT
    @CashAndCoinsYT 3 ปีที่แล้ว +1

    I love that you don't mind sharing your knowledge! Thank you sir.

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      You are very welcome and well appreciated thank you so much🤠💛😎👍

  • @silverkeys
    @silverkeys 3 ปีที่แล้ว +2

    Super reasonable crucible! We've made two--will make more when our weather warms up!

  • @willstreasures7986
    @willstreasures7986 3 ปีที่แล้ว +1

    Very cool. I like the idea of a homemade crucible

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      It’s a lot quicker than waiting for them to come from overseas that’s for sure 🤠💛😎👍

  • @kumardigvijaymishra5945
    @kumardigvijaymishra5945 5 หลายเดือนก่อน +1

    Cool demo. Also better to make mouth of cavity shorter and depth of cavity deeper. Helps in melting metal faster, and not depleting entire oxy-acetylene cylinder.

  • @jedermachtigallmighty7345
    @jedermachtigallmighty7345 3 ปีที่แล้ว +4

    Great idea 4Nines Fine Silver 🐙👍
    I like very much the sound of the hot pour template on water
    The skull looks awesome too😎🥇👍

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Yeah a lot of people like the sound of the quench when the red hot metal touches the water🤠💛😎👍

  • @AlohaStacker
    @AlohaStacker 3 ปีที่แล้ว +4

    Great video and lots to learn! I will look to pouring come fall/winter this year!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Thanks mate I really appreciate your comment and support my friend 🤠😎💛👍

  • @frankfeldstein6611
    @frankfeldstein6611 ปีที่แล้ว +1

    I'm amazed that the cement did not blow up! The times I have tried to use cement , plasters , lime to melt in they were explosive grenades.

    • @notyouraveragegoldenpotato
      @notyouraveragegoldenpotato 8 หลายเดือนก่อน

      That's usually the case.. its a TERRIBLE media for crucible. Physically, chemically contams your melted metal. It's very very far from ideal. There are equally cheap and equally easy ways to make crucibles that won't cause the same issues

  • @michelleyoung4017
    @michelleyoung4017 3 ปีที่แล้ว +3

    that was awesome thanks 4ninesfine silver :}

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Thank you so much that is very nice of you to say🤠💛😎👍

  • @sassy7173
    @sassy7173 3 ปีที่แล้ว +4

    I dont have anywhere to do stuff like that but very interesting to watch

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Well thank you so much for watching and giving a comment I really appreciate it🤠💛😎👍

  • @cwsilversearcher3676
    @cwsilversearcher3676 3 ปีที่แล้ว +2

    Very nice demonstration

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Thank you so much I really appreciate your feedback let’s hope it gets a few views🤠💛😎👍

  • @lisapurdy2202
    @lisapurdy2202 ปีที่แล้ว +1

    Great video! Very helpful and casual!! Thanks and have a blessed day! 👏

  • @shaunhall1838
    @shaunhall1838 3 ปีที่แล้ว +1

    I’ll definitely use the lime and cement. Thanks again!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      You are very welcome my friend good luck with it make sure you let it dry properly otherwise it will crack 👍👍

    • @shaunhall1838
      @shaunhall1838 3 ปีที่แล้ว

      @@4ninesfinesilver315 I will. :)

  • @sickasbossftw870
    @sickasbossftw870 3 ปีที่แล้ว +2

    Nice video 4nines

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Thanks mate I really appreciate your comment and turning up to the premier🤠😎💛👍

  • @StackingSilverman
    @StackingSilverman 3 ปีที่แล้ว +5

    That's awesome my guy I will definitely remember this video when I start pouring. Everytime i watch one of these videos I learn something I didn't know thanks for the info bro 🍻👍🍻👍🍻

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +2

      Thank you my friend that is an awesome comment thank you so much for the feedback I really appreciate it🤠💛😎👍

    • @StackingSilverman
      @StackingSilverman 3 ปีที่แล้ว

      @@4ninesfinesilver315 your welcome thank you for making these videos I'm gonna need all this info soon now I wont have to go around askin people a million questions lol🤣🤣🤣

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      If you need any help with anything except for how to make my sand then don’t hesitate to email me with your questions

    • @StackingSilverman
      @StackingSilverman 3 ปีที่แล้ว +1

      @@4ninesfinesilver315 thank you I appreciate that 🍻🍻🍻

  • @SeaMonkeyMetals
    @SeaMonkeyMetals 3 ปีที่แล้ว +2

    Well how about that!👍🏻 Love your pours and videos Brother! Thanks for the great info!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      You are very welcome sea monkey I hope you are getting something out of them thanks for the comment🤠😎💛👍

  • @SilverOceans
    @SilverOceans 3 ปีที่แล้ว +2

    That is awesome! The skull came out great! I never thought about making a crucible.
    🔥🦈🌊

  • @danadee2101
    @danadee2101 2 ปีที่แล้ว +1

    Excellent and fascinating. Cheers!

    • @4ninesfinesilver315
      @4ninesfinesilver315  2 ปีที่แล้ว

      Thank you Dana for your encouraging words 🤠😎👍

  • @shaunhall6834
    @shaunhall6834 9 หลายเดือนก่อน +1


    This is a game changer for me.

    • @4ninesfinesilver315
      @4ninesfinesilver315  9 หลายเดือนก่อน +1

      I appreciate your comment thank you my friend🤠👍

  • @GDSavingThePast
    @GDSavingThePast ปีที่แล้ว +1

    great information, thanks for sharing it.
    Just subscribed

  • @StackingSilverman
    @StackingSilverman 3 ปีที่แล้ว +1

    Awesome I love this video

  • @johnhenry3256
    @johnhenry3256 3 ปีที่แล้ว +1

    Unbelievable man. It's crazy how easy you make everything look. 👏🤠👍

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      That my friend is particularly easy🤠🤩😎👍

  • @MichaelR58
    @MichaelR58 3 ปีที่แล้ว +2

    Very good tutorial , thanks for sharing , God bless !

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Thank you I appreciate that my friend 🤠💛😎👍

  • @silvervikings4819
    @silvervikings4819 3 ปีที่แล้ว +1

    Nice video.

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Thanks my friend I really appreciate you watching and leaving a comment💛😎👍

  • @Quahogstacker
    @Quahogstacker 2 ปีที่แล้ว +1

    Great video and information. Thanks I will definitely try this thanks again 👍

    • @4ninesfinesilver315
      @4ninesfinesilver315  2 ปีที่แล้ว +1

      Awesome, please make sure you let it dry completely 🤠👍

    • @Quahogstacker
      @Quahogstacker 2 ปีที่แล้ว +1

      @@4ninesfinesilver315 for sure ! Do you use petrobond or make your own?

    • @4ninesfinesilver315
      @4ninesfinesilver315  2 ปีที่แล้ว +1

      @@Quahogstacker There is no way you can get this sort of detail with premixed sand you have to make your own. Sorry I can’t help you with that😖

  • @hobbynethobbynet668
    @hobbynethobbynet668 3 ปีที่แล้ว +1

    Nice video

  • @sherieward7707
    @sherieward7707 3 ปีที่แล้ว +2

    Hello 4nines Fine Silver sorry I’ve been missing your videos. Great instructional video my friend I appreciate you sharing. It’s so helpful I’m about to start my new pouring adventure and very excited to be doing it. It turned out great thanks for sharing. That skull is so detailed way to go I’m not a big fan of the skulls but that one is sweet . You are awesome my friend. I hope you have a great week.
    Keep pouring
    Best wishes

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Thank you very much Sherie for your beautiful comment and words of encouragement I really appreciate them God bless you🤠💛😎👍

  • @KELLYRAEcopperqueen
    @KELLYRAEcopperqueen 2 ปีที่แล้ว +1

    Wow that was pretty awesome. Great Job👍💕

  • @vaughndumas
    @vaughndumas 3 ปีที่แล้ว +1

    Very cool, mate. I guess I’m off to Bunnings this weekend!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      You are very welcome my friend good luck with the project😂💛😎👍

  • @silverkeys
    @silverkeys 3 ปีที่แล้ว +2

    I wish we could see the chat in replay. I had asked if you had used this much yet, before posting the video and how well it's held up verses the plaster of paris ones? The same? Better? We have some posts to set when the ground thaws here this spring and we could make up some of these to use if they hold up well!

  • @TEXAS-SMITH
    @TEXAS-SMITH ปีที่แล้ว +2

    Playing with molten metal is no joke. Because your crucible is not hot at the bottom doesn't make it safe to be handling it without a glove. It only takes one screw up and that metal will become part of you. I hope it never happens to you but if it does I hope you man up and warn everybody about how dangerous carelessness truly is. What a nightmare waiting to happen.

    • @4ninesfinesilver315
      @4ninesfinesilver315  ปีที่แล้ว

      Yes you are right thank you for warning everyone in your comment I certainly will emphasise the risk in my next video thank you🙏🤠👍

  • @BrocktonMagnetFisher
    @BrocktonMagnetFisher 2 ปีที่แล้ว +1

    Awesome video I just subscribed

    • @4ninesfinesilver315
      @4ninesfinesilver315  2 ปีที่แล้ว +1

      Thank you welcome aboard my friend 🤠😎🤩👍

    • @BrocktonMagnetFisher
      @BrocktonMagnetFisher 2 ปีที่แล้ว +1

      @@4ninesfinesilver315 You're welcome glad to be here bud

  • @hamguer3653
    @hamguer3653 11 หลายเดือนก่อน +1

    Vous êtes professionnel et professeur merci pour la leçon

  • @rubarb0406
    @rubarb0406 3 ปีที่แล้ว +5

    Hi, as I watched this the thought that there may be a safety concern crossed my mind. First, kudos on experimenting. Many USA versions of prepared cement have small rock(s) in it. There is a potential for these rocks to explode. Thus, it may be that one is better off mixing their cement from scratch using "fines" (sand) and powdered cement only.

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Yes I agree with you you are better off to use cement alone with no sand or anything else in it I am just preparing to make a new video on that very subject I have had never had one explode as yet but they do tend to crack after a while👍

    • @VikingVic76
      @VikingVic76 ปีที่แล้ว +1

      If you get Portland Cement it does not have rocks and other aggregate mixed into it, concrete on the other hand does have those rocks. To be sure to get a cement not a concrete mix

  • @manguydude287
    @manguydude287 3 ปีที่แล้ว +4

    I am extremely curious about how these could hold up in a gas furnace. This is something I will have to experiment with

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      I think you would have to adjust the shape of them but I think it would stand up quite well because I’m not using any sand there is nothing there to breakdown🤠💛😎👍

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      For the price you have nothing to lose to try 💛😎👍

    • @Thewulf56
      @Thewulf56 3 ปีที่แล้ว +1

      These are interesting, but I am not sure how long they would hold up in a traditional gas fired furnace. If they had any moisture content they would probably end up cracking and you wouldn't want that. Usually most refractory cements are designed for the immense heat of the furnace. You are probably looking at 24-2500 degrees when you pull the crucible out, at least for the outside wall temp. It would be something to test a few time b4 using any metal in it. Did you bake them any in a oven or just sunshine? Just looking out here, you really dont want a steam explosion or a crucible full of molten metal hitting any part of you.

    • @silverunicorn2645
      @silverunicorn2645 3 ปีที่แล้ว +3

      With as little as I know, I would recommend adding a bake off to the initial air dry. I'd even go so far as to bake it at 250F for a couple of hours in a conventional oven, to prevent a catastrophic failure, in an effort to drive all of the residual moisture out of the piece. Also, use less material. You do not want an internal steam explosion. It could ruin your kiln, or severely injure you.

    • @Thewulf56
      @Thewulf56 3 ปีที่แล้ว

      @@silverunicorn2645 you are exactly correct. I'm more than guessing it wouldn't hold up in a regular furnace. Seems to work pretty good for the acetalene torch. I don't think I would risk using anything other than clay/graphite or ceramic. If you could get your own clay and graphite and make that way, would be better.

  • @teamSHTF
    @teamSHTF 3 ปีที่แล้ว

    How am I just seeing this now? TH-cam is 🤪 good work! I'll check out the playlist

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Thanks mate it’s been out for awhile that one👍 thank you I would really appreciate you watching a playlist or 2 my friend that would be great🤠😎🤩👍

  • @silverunicorn2645
    @silverunicorn2645 3 ปีที่แล้ว +1

    Very nice. 👍

  • @keithandres
    @keithandres 3 ปีที่แล้ว +1

    Awesome brother! Nice to know you can make your own crucibles!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Hey Keith, they work surprisingly well 🤠💛😎👍

  • @PartridgeFamilyProspecting
    @PartridgeFamilyProspecting 3 ปีที่แล้ว +1

    Very cool idea!! Man I may be able to afford this afterall!!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Yes you don’t need to spend a lot of money to enjoy pouring metal 🤠😎🤩👍

  • @castingtechnology3338
    @castingtechnology3338 3 ปีที่แล้ว +2

    Simply brilliant

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Thank you so much I appreciate the comment🤠💛😎👍

  • @PlumberStacker
    @PlumberStacker 3 ปีที่แล้ว +1

    New sub! I am going to love these videos. I just started pouring silver

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Awesome that is great news to hear the extra Watch time and the thumbs up wouldn’t hurt that’s for sure😂😂if I can help in anyway don’t hesitate to email me with your questions .🤠💛😎👍

  • @silverstallion4634
    @silverstallion4634 3 ปีที่แล้ว +2

    Very cool

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      G’day mate thanks for dropping in and leaving a comment I appreciate it bro🤠💛😎👍

    • @silverstallion4634
      @silverstallion4634 3 ปีที่แล้ว +1

      @@4ninesfinesilver315 no problem brother I enjoy your videos

  • @HeyItsJumpman
    @HeyItsJumpman 5 หลายเดือนก่อน +2

    Police: "Sir what are you doing with this Cement and Lime?"
    Me: "Making a Crucible..."
    Police: "Book 'em."

  • @diymaster101
    @diymaster101 ปีที่แล้ว +1

    Hi is grey cement normal cement? And nice video thank you really appreciate cheers 👍🏾

  • @billyjennings2472
    @billyjennings2472 2 ปีที่แล้ว

    Nice job

  • @scottmcmunn5369
    @scottmcmunn5369 8 หลายเดือนก่อน +1

    Good demo

  • @l0I0I0I0
    @l0I0I0I0 3 ปีที่แล้ว +1

    Nice!

  • @silvercat7162
    @silvercat7162 3 ปีที่แล้ว +1

    Nice job buddy. Is there any way that you could put a handle on it something like a coffee cup handle

  • @alexmair3613
    @alexmair3613 ปีที่แล้ว

    Amazing proof of concept video I just have one question. Can this crucible withstand temperatures to melt steel or iron? Thanks again for the lecturio!

    • @4ninesfinesilver315
      @4ninesfinesilver315  ปีที่แล้ว +1

      Thank you for your question Alex but I would probably say no. you would be better off to get a graphite Crucible for steel. 🤠👍

  • @hernanaranda2090
    @hernanaranda2090 ปีที่แล้ว +1

    Can you put this kind of crucible in a furnature, resist 1200 C? Thank you, is good the video

  • @apathyreview3964
    @apathyreview3964 3 ปีที่แล้ว +1

    Exactly what I hoped for. Do you have any vids on crucibles that absorb x y or z.(being metals)?

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Hey Shane thank for your comment . Not sure what you are asking, but I will be doing another crucible video soon.🤠😎🤩👍

    • @mikemarley2389
      @mikemarley2389 2 ปีที่แล้ว

      A cupel?

  • @mikemarley2389
    @mikemarley2389 2 ปีที่แล้ว +3

    Beware if concrete has any moisture in it ,it will explode like a river rock under high heat.

    • @4ninesfinesilver315
      @4ninesfinesilver315  2 ปีที่แล้ว

      Yes Mike you are right. You must let it dry out completely 🤠👍

  • @dennyrich
    @dennyrich ปีที่แล้ว +1

    I thank you for this info .

  • @NORSKGARDEN
    @NORSKGARDEN 5 หลายเดือนก่อน +1

    Awesome

  • @sparrafien
    @sparrafien ปีที่แล้ว +1

    Hi sir, thanks for your informative videos,
    Please tell me, would this material used for this crucible survive in a furnace?

    • @4ninesfinesilver315
      @4ninesfinesilver315  ปีที่แล้ว

      The honest answer is probably no . if you vibrated the mix very well and made sure all the oxygen bubbles were out. It may work but you would be much better off to use a graphite Crucible in a furnace. 🤠👍

    • @sparrafien
      @sparrafien ปีที่แล้ว +1

      @@4ninesfinesilver315 thank you, sorry for. All the questions, the graphite you referring to is that black fine powder that they use for dry lubrication also?

    • @4ninesfinesilver315
      @4ninesfinesilver315  ปีที่แล้ว +1

      @@sparrafien yes, that is exactly right. The solid graphite is machined into the shape of a Crucible, 🤠👍

  • @PirateStacker
    @PirateStacker 3 ปีที่แล้ว +1

    I like that your T-2 is like my One Eyed Willie on my table top... Table mascot! Really fascinating stuff man... Did you just learn all this stuff by trial and error? Found this video so interesting! Way cool! Crucible works like a charm! Really awesome skull bro! Great video!

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Yes mate I needed a new Crucible and most of the suppliers were overseas and I didn’t want to have to wait two or three months for the delivery so I thought I better start making my own and each time I make a new one I improve on it my first Crucible video has received over 7000 views so far and so I thought I would keep doing them until my channel started to grow🤠💛😎👍

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      I’m trying to come up with a smaller terminator skull so I can pour it in silver or copper🤠💛😎👍

  • @NOSEMATICS
    @NOSEMATICS 3 ปีที่แล้ว +3

    Excellent 🤩🤩🤩🤩😁🍻🍻👃🏻👃🏻👃🏻

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว +1

      Thank you my friend I thought about this one before I made it🤠😎💛👍

    • @NOSEMATICS
      @NOSEMATICS 3 ปีที่แล้ว +2

      @@4ninesfinesilver315 and a very well thought out how to video it was for sure. Brilliant 🤩🤩🍻👃🏻

  • @4ninesfinesilver315
    @4ninesfinesilver315  3 ปีที่แล้ว +4

    If you like this video and would like to see more Crucible bills then check this playlist out th-cam.com/play/PLZiTg-N4i2ZIiM05IwjPlw4Ru_Nks3Pr1.html

  • @dewaynemancell4562
    @dewaynemancell4562 3 ปีที่แล้ว +3

    That is something that I can do

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      G’day Dwaine thank you very much for the feedback I really appreciate it🤠💛😎👍

  • @dylanjames4537
    @dylanjames4537 6 หลายเดือนก่อน +1

    Hey mate very good vid I just wanna know would I be able to melt my alluvial gold down in this and how much do you think would be the limit? Sorry for asking im just not sure. Thanks in advance.

    • @4ninesfinesilver315
      @4ninesfinesilver315  6 หลายเดือนก่อน +1

      Thanks for your question. The short answer is yes it would work, but you would be better to spend a little bit of money on a ceramic Crucible because gold is very expensive and I would hate to see you waste any🤠👍

    • @dylanjames4537
      @dylanjames4537 6 หลายเดือนก่อน

      @4ninesfinesilver315 ok ill get some off ebay thanks mate

  • @rileyblight4592
    @rileyblight4592 ปีที่แล้ว +1

    I see the glaze and bowl shape was immediately damaged after that one use. Would a patch up on damage and reglaze make this reusable or would it best to recycle the old ones into a new one?

    • @4ninesfinesilver315
      @4ninesfinesilver315  ปีที่แล้ว

      You can definitely patch up the glaze I’ve had one of these crucibles last for months with constant use, although if you were going to melt metal on a regular basis, you would be better off with a prefabbed Crucible. They are not very expensive. I also have a video on subject th-cam.com/video/OMyssKCzN48/w-d-xo.html 🤠👍

  • @vincentcocuzza8679
    @vincentcocuzza8679 2 ปีที่แล้ว +1

    What was that you pushed the skull into to make the mold?

    • @4ninesfinesilver315
      @4ninesfinesilver315  2 ปีที่แล้ว

      Hello my friend that is a special mix of green sand made with the finest silica sand on earth thank you for your comment😎👍

  • @StackingSilverman
    @StackingSilverman 3 ปีที่แล้ว +1

    So can you use mapp gas to melt the metals in crusable as well

  • @bryantclay7212
    @bryantclay7212 ปีที่แล้ว +1

    Can you use these in an electric oven??

    • @4ninesfinesilver315
      @4ninesfinesilver315  ปีที่แล้ว

      Thank you for your question Bryant. But you would be better off to use a graphite Crucible in that situation🤠👍

  • @rzhunzhu1066
    @rzhunzhu1066 3 ปีที่แล้ว +2

    👍👍✌

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Thank you I really appreciate your 👍👍✌️. 🤠💛😎👍

  • @BLACK_FORTYFIVE
    @BLACK_FORTYFIVE 3 ปีที่แล้ว

    You can use dirt and stuff for molds too right

    • @4ninesfinesilver315
      @4ninesfinesilver315  3 ปีที่แล้ว

      Not sure about using dirt I haven't tried it before. I normally use sand 😎👍

  • @hotheadsniper
    @hotheadsniper 3 ปีที่แล้ว +1

    What is grey cement? Is it normal building cement?

  • @jessejones1463
    @jessejones1463 2 ปีที่แล้ว

    thank you!

  • @arjunaravindakshan2255
    @arjunaravindakshan2255 10 หลายเดือนก่อน +1

    What is the mixture?

    • @xer05tar
      @xer05tar 7 หลายเดือนก่อน

      50/50 lime/cement

    • @kumardigvijaymishra5945
      @kumardigvijaymishra5945 5 หลายเดือนก่อน

      What is garden lime ? Is it calcium carbonate?

  • @Eng.AHMED967
    @Eng.AHMED967 ปีที่แล้ว

    Is the lime means CaSo4.2H2o ???