ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Someone did well to break one of these. Over the years these have proven to be e very reliable 👌🏻
Clearances while bearing fittings may be separate video, what all can go wrong, will be a great learning.
how to fitment mechanical seal.plz make vdo.
Sir if i come to your place, can you give me training for overhauling of this compressor.
Sir can you please send me the nomral speed video .
How did you set the spacing Rotor Case with Female Rotor ?
how did you decrease the games from 0.02 to 0.07.Thank you so much
Great job. Do you have a part# for the locking ring socket? Thanks
hand made sir..
Video not clear sir
Are those new screw rotors your installing?
Overhaul , old comppressor
Good
Thank you.
Can you share the torque?
@@jesusadrianyocupicio8391 Torque of which parts
@@myintercool5680Please provide torque details for each part. You are doing very informative videos sir. Thank you so much
@@manuvimal8705 I used the torque according to the nut size. And the running distance of the bearings is used according to the machine's standard, which is the use of the machine's pad.
Haw you test compressor direct ac volts .plz tell me
No test
You can use VFD drive for dry test.
How to adjust the clearance?
0.4mm.
Sir gud day saan po ako kukuha ng point of reference para makakuha ng 0.04 clearance thank you very much more blessings God bless
Not showing how to adjusting clearances.
Where are you located?
Bangkok./ Thailand
Do you need help?
Someone did well to break one of these. Over the years these have proven to be e very reliable 👌🏻
Clearances while bearing fittings may be separate video, what all can go wrong, will be a great learning.
how to fitment mechanical seal.plz make vdo.
Sir if i come to your place, can you give me training for overhauling of this compressor.
Sir can you please send me the nomral speed video .
How did you set the spacing Rotor Case with Female Rotor ?
how did you decrease the games from 0.02 to 0.07.
Thank you so much
Great job. Do you have a part# for the locking ring socket? Thanks
hand made sir..
Video not clear sir
Are those new screw rotors your installing?
Overhaul , old comppressor
Good
Thank you.
Can you share the torque?
@@jesusadrianyocupicio8391 Torque of which parts
@@myintercool5680
Please provide torque details for each part. You are doing very informative videos sir. Thank you so much
@@manuvimal8705 I used the torque according to the nut size. And the running distance of the bearings is used according to the machine's standard, which is the use of the machine's pad.
Haw you test compressor direct ac volts .plz tell me
No test
You can use VFD drive for dry test.
How to adjust the clearance?
0.4mm.
Sir gud day saan po ako kukuha ng point of reference para makakuha ng 0.04 clearance thank you very much more blessings God bless
Not showing how to adjusting clearances.
Where are you located?
Bangkok./ Thailand
Do you need help?