I get the feeling Joey could make this a monthly thing, either to cover updates to existing boards or to cover what I'm sure is a bi-monthly board build. 😄
As is the case with all of your videos, everything you touch sounds glorious. What interests me the most about the smaller board is the idea behind it. My favourite Landreth Bros. clips are always the smaller, more intimate ones. Just a few friends, in a room, making music together!
Love the monster fuzz tones! I'm not midi compatible however, so I don't understand the rest of it. Oh, whatever you were playing with the JHS vibrato was amazing. It's the exact sound they should use to sell that pedal. Awesome!!
Loving this. I'm in the middle of yet another "last" board build and I finally think I've reached the right balance between having presets as well as the easy on-the-fly tweakability that traditional pedals provide. Happy to say I've made a lot of similar decisions... Midi controller with a morningstar midi looper. support for 1 or 2 amps with a midi controllable ABY, a couple of programmable pedals, but mostly traditional pedals. Can't wait to have the thing done. Now if I could just play better...
You mentioned missing some "on the fly" controls. The Morningstar MIDI foot controllers also respond to MIDI. You have the option to not allow those messages to go down stream, AND you can send simple messages to the Morningstar and it will do its magic (ei: CC9 from dumb control = MC? does 20 things). I use this cheapo "M-Vave Chocolate" 4-button switch (ultra tiny and $15 on Temu), into my MC8 almost like a dedicated Aux switch, to do Bank control, Page switching and an always available Tap/BPM...but you could probably set it up as a dedicated "loop on/off" for any pedals on the GigRig Looper or MC10X, if you wanted to experiment, without setting up a new patch on the MC6 Pro. Just some nerd love. You are amazing.
Adore the sounds you get out of the Condor. Hopefully it inspires Chase Bliss to do a reissue, because trying to ape that with a wah in one side of a dual mono is a pale imitation (but it is cool). Also it warms the cockles to hear that the Slide Deities Dylan Adams & Joey are busting each others chops over pedal count.
Ditto. I recently did a session and the engineer had a Condor, fell in love. We used it on every track, incredibly versatile device, really hope its brought back
Beautiful tones Joey! I recently got a Generation Loss and have been using it as a blown out tape saturator for lofi distorted tones. Sounds killer with slide and has a very evocative tone. Always love your musicality and creativity with pedals
I see my doppelgänger (kevinberthoud9347), I was thinking the same thing ... Mr "Lambert" ... ( no wife editor jokes ... promise) has already chimed in so I'll just say thx M.R. Gadget! Seriously I really appreciate the ideas you shared. Toying around with updating my small board, you provided much to consider. You playing THAT guitar, along with ur 2rock sig amp and the board of course it sounds really good. 😎
For 2022 we did! The band is surprisingly quiet on stage, but it was loud enough! Was using through a Barefaced Big Twin which is a phenomenal cab and very efficient (that helps too). Not sure it would cut it in a loud setting though
@@Thebroslandreth Nice! Do you think it could work in your quartet settings say with Liam on Wurly ? That’s kindof my live setup at the moment and a portable tube head like that for club gigs would be so neat, and the recording options seem great too
Thank you for doing this Joey. An idea for a Gadget3x video: Packing Colton and your guitars, amps etc up for the road. Which cases and the thoughts behind them. Difference between fly rigs and the mainland one. How many guitars do you bring etc etc.
Wow I’ve been dreaming of having the duophony with the mercury 7 and the thermae on either side, so to see my guitar hero have it on his board is amazing. I would love to see your approach to set ups and different sounds with using this combination. These are some amazing tones and after listening to Live 2000 again I can really hear the sound and playing influences. I can’t wait to see Colton and the bros. Lambert in Charlotte in a few months.
Amazing board and tones as usual! Can you expand on the parallel mixing of the delay and reverb more? Why this is so inspiring, how it works in practice in a w/d (rather than w/d/w) setup, and any other insights you have about it.
Awesome video as always! Curious about some of the sounds your getting from the Gen Loss MK2 and your approach to that pedal. Would love a video on that.
What a cool board. Makes me want to rip mine apart again. I soooooooo want your sig Two Rock, but for now my 100W Bloomfield Drive will more than do. But nothing beats a good harmonic / bias amp trem. Maybe a wet dry with my brown panel Suhr Hombre?? 😮
From a completely different genre but ordered your sig amp in an instant, probably the last one on Earth. How is the pedalboard hooked up to the two amps btw, and are you using the effects loop? Thank you for doing this, you’re something else.
I don’t think I mentioned that. Yep! It’s always on. I pretty much always run my main drive like that. Whether it’s a KoT, golden boy, whatever, it’s always on!
I’ve watched the first 3 minutes a dozen times.. that tone is gorgeous. What is happening there? Stoked to catch you all on tour this year! Saw you in Hamilton last yea, a ducking good show, and it inspired me to finally start working on my original music. ✌️❤️🎶
How much drive is coming out of the amp? I’d love a thermae but I tend to run delays in the FX loop and not sure how the thermae sounds into a dirty amp.
Very little drive is coming from the amp in this situation. But I am running it post drive which I’m assuming your FX loop would do in your amp. Just depends on if your loop is series or parallel.
Sounding killer as usual, Joey! You may have already explained this somewhere, but what happened with the gold top? Did you leave it out of the fridge too long, or did the lawyers come a knocking?
We definitely need some shorts that are fake clips from the non-existent show 'Gadget, Gadget, Gadget' hosted by everyone's favorite guitar influencer, Jory Lambert. 🎸
I swapped the génération loss out for a MOOD, actually swapped the thermae AND merc7 out for the empress echosystem. Swapped the fuzz out for fun, of course! I might have to do another video explaining some stuff
@@joeylandrethmusic I appreciate it, but I don't expect you to write a book here! Lol I just got an hx stomp and I have a few midi pedals, I will just deal with things as they come up, I just see these rigs with all these extra routing and interface boxes and I have questions! Like I said, I appreciate it, but I will figure it out.
Can’t wait to see you in two days in Newfoundland!!!
I watched your nervous small board assembly as one of the "hundreds". I am among the chosen ones... YAY! ;)
I look forward to seeing Mr. Lambert live in Chicago!!! ;)
Stoked to see you on Vancouver island with your brother and buddies
I get the feeling Joey could make this a monthly thing, either to cover updates to existing boards or to cover what I'm sure is a bi-monthly board build. 😄
Can't wait to hear Colton live!
As is the case with all of your videos, everything you touch sounds glorious. What interests me the most about the smaller board is the idea behind it. My favourite Landreth Bros. clips are always the smaller, more intimate ones. Just a few friends, in a room, making music together!
Love the monster fuzz tones! I'm not midi compatible however, so I don't understand the rest of it.
Oh, whatever you were playing with the JHS vibrato was amazing. It's the exact sound they should use to sell that pedal. Awesome!!
new to the channel - recently saw a killer performance with Jory/Joey :) - great to see people deep into the craft.
Thx Mr Lambert ... 😊! Wonderful sounds. Totally digging your willingness to share your sonic secret sauce. Learned a lot. Very grateful ...
Can't wait to see you put this thing to good use when you are in the DC area!
Loving this. I'm in the middle of yet another "last" board build and I finally think I've reached the right balance between having presets as well as the easy on-the-fly tweakability that traditional pedals provide. Happy to say I've made a lot of similar decisions... Midi controller with a morningstar midi looper. support for 1 or 2 amps with a midi controllable ABY, a couple of programmable pedals, but mostly traditional pedals. Can't wait to have the thing done. Now if I could just play better...
Hey Jory Lambrecht - really enjoyed this one - hope you're keeping well!
You mentioned missing some "on the fly" controls. The Morningstar MIDI foot controllers also respond to MIDI. You have the option to not allow those messages to go down stream, AND you can send simple messages to the Morningstar and it will do its magic (ei: CC9 from dumb control = MC? does 20 things). I use this cheapo "M-Vave Chocolate" 4-button switch (ultra tiny and $15 on Temu), into my MC8 almost like a dedicated Aux switch, to do Bank control, Page switching and an always available Tap/BPM...but you could probably set it up as a dedicated "loop on/off" for any pedals on the GigRig Looper or MC10X, if you wanted to experiment, without setting up a new patch on the MC6 Pro. Just some nerd love. You are amazing.
Adore the sounds you get out of the Condor. Hopefully it inspires Chase Bliss to do a reissue, because trying to ape that with a wah in one side of a dual mono is a pale imitation (but it is cool). Also it warms the cockles to hear that the Slide Deities Dylan Adams & Joey are busting each others chops over pedal count.
I would love to see that. I actually got mine at the very last minute and if it ever dies, I’ll be devastated!!
Ditto. I recently did a session and the engineer had a Condor, fell in love. We used it on every track, incredibly versatile device, really hope its brought back
Beautiful tones Joey! I recently got a Generation Loss and have been using it as a blown out tape saturator for lofi distorted tones. Sounds killer with slide and has a very evocative tone. Always love your musicality and creativity with pedals
I’ve mostly been using it to add that nostalgia-ness to stuff. I also really love the freeze thing it does!
I see my doppelgänger (kevinberthoud9347), I was thinking the same thing ... Mr "Lambert" ... ( no wife editor jokes ... promise) has already chimed in so I'll just say thx M.R. Gadget! Seriously I really appreciate the ideas you shared. Toying around with updating my small board, you provided much to consider. You playing THAT guitar, along with ur 2rock sig amp and the board of course it sounds really good. 😎
Okayyy fine, pedalboards can sound alright I guess 🙄 (kidding, epic tones you got there and thanks for the shoutout Joey hahaha 🤙🏻)
Oh hey, boyeeeeee!!! Your ears must’ve been burning;) all love, buddy!
Awesome board as always, Joey! Really wish I could see you in Tour, but you would need to come to Brazil!!
Hope you have a great tour!
Hope to you again this summer In Cologne, Germany. It’s starting to feel like a nice ritual! The next will be I guess the 4th time 🙌🙌
That sound you get with with the Emperor sounds SO GOOD. I hope I can get my Walrus M1 somewhere close to that.
Very cool. Love the Dominion Fuzz ❤
Me tooooo!!
was Dave using the Ampeg PF50t all tour? Good to know it was nice and loud enough for a rocking trio
For 2022 we did! The band is surprisingly quiet on stage, but it was loud enough! Was using through a Barefaced Big Twin which is a phenomenal cab and very efficient (that helps too). Not sure it would cut it in a loud setting though
@@Thebroslandreth Nice! Do you think it could work in your quartet settings say with Liam on Wurly ? That’s kindof my live setup at the moment and a portable tube head like that for club gigs would be so neat, and the recording options seem great too
Sounding great! I’m excited to see you and Colton in Austin in May!
Stoked about coming to the masterclass in Sydney in about 48hrs…not that I’m counting….haha (yes, I am counting).
See ya there!
Joey’s small board is more elite than any big board I will ever own lol
I can’t help it!
Love it! What's the pedal chain/filter thang in the intro though???
I feel like if you like the Emperor, you would love the Warped Vinyl!!
Thank you for doing this Joey.
An idea for a Gadget3x video: Packing Colton and your guitars, amps etc up for the road. Which cases and the thoughts behind them. Difference between fly rigs and the mainland one. How many guitars do you bring etc etc.
Brilliant! We’ll put that in the “ideas” box!
Joey: "I'm not going to need a fuzz on my pedalboard anymore"
Joey's fuzz pedals: "Bwah ha ha ha! give him two days without us"
Gahahahahha
Wow I’ve been dreaming of having the duophony with the mercury 7 and the thermae on either side, so to see my guitar hero have it on his board is amazing. I would love to see your approach to set ups and different sounds with using this combination. These are some amazing tones and after listening to Live 2000 again I can really hear the sound and playing influences. I can’t wait to see Colton and the bros. Lambert in Charlotte in a few months.
It’s a game changer pedal especially for running non-dry-kill pedals like the thermae.
That’s a bad man right there.
Amazing board and tones as usual! Can you expand on the parallel mixing of the delay and reverb more? Why this is so inspiring, how it works in practice in a w/d (rather than w/d/w) setup, and any other insights you have about it.
Awesome video as always! Curious about some of the sounds your getting from the Gen Loss MK2 and your approach to that pedal. Would love a video on that.
What a cool board. Makes me want to rip mine apart again.
I soooooooo want your sig Two Rock, but for now my 100W Bloomfield Drive will more than do. But nothing beats a good harmonic / bias amp trem. Maybe a wet dry with my brown panel Suhr Hombre?? 😮
If the ability to critically and creatively use tools is connected to intelligence-this is genius.
Stunning sounds as always! & to think I was thinking about selling my merc7 🤦♂️
Chewbacca at 8:24
Don't upset the Wookie.
Sounds killer
Ha! I live 3 miles from a place called Colton :) P.S. come to Yorkshire again, last time at Sheffield was groovy
From a completely different genre but ordered your sig amp in an instant, probably the last one on Earth. How is the pedalboard hooked up to the two amps btw, and are you using the effects loop? Thank you for doing this, you’re something else.
‘If I buy a fuzz on the road’, as if that isn’t 90% of the reason to go on the road 😜
Is the SD9 on all the time, or where is the drive coming from? Sorry if it's in the video and I missed it. Sounds EPIC!
I don’t think I mentioned that. Yep! It’s always on. I pretty much always run my main drive like that. Whether it’s a KoT, golden boy, whatever, it’s always on!
@@joeylandrethmusic Thanks man! Can't wait to see the Bros in Kansas City.
I’ve watched the first 3 minutes a dozen times.. that tone is gorgeous. What is happening there?
Stoked to catch you all on tour this year! Saw you in Hamilton last yea, a ducking good show, and it inspired me to finally start working on my original music. ✌️❤️🎶
I have an expression pedal controlling the LPF knob on my Chase Bliss Condor. Then I have a little short delay!
You should talk about the stereo treatment. Is it dry wet or?
When are you coming back to the UK
we love you joey
Come to Charlotte USA dood!! 🙂
Have you done a gig in recent years that was just you and the amp? I would be fascinated to see
Often when I play solo shows!
Thanks for sharing Joey! Just curious is that Maxon distortion pedal modded? And when you tap in the delay is it usually 1/4 note?
It’s the SD-9 and it is modded! I have two of them, both from analogman.
Oh, and I’ll use 1/4 delay for when I want the delay to be more subtle, solos and stuff but I’ll use dotted 8th for rhythm parts
@@joeylandrethmusic right on, thanks !
love this stuff!
How much drive is coming out of the amp? I’d love a thermae but I tend to run delays in the FX loop and not sure how the thermae sounds into a dirty amp.
Very little drive is coming from the amp in this situation. But I am running it post drive which I’m assuming your FX loop would do in your amp. Just depends on if your loop is series or parallel.
How are you using the Generation Loss?
I was using it as another modulation level but also using the freeze function from the MKI!
Beautiful
Sounding killer as usual, Joey! You may have already explained this somewhere, but what happened with the gold top? Did you leave it out of the fridge too long, or did the lawyers come a knocking?
Hahahaha, the lawyers came a knockin’. Alex was planning to build me another guitar and was asked to explore another shape.
What board is that BTW?
Creation Music Supply aero!
@@joeylandrethmusic Thanks! Perfect size I'd say.
More Jory Lambert please 😂
We definitely need some shorts that are fake clips from the non-existent show 'Gadget, Gadget, Gadget' hosted by everyone's favorite guitar influencer, Jory Lambert. 🎸
Hahahahahhah. I’ll explain the origins of Jory Lambert on another video…
Oh...no Jóse Lambretta?😮
Speakers in the background, anyone? Not JBLs right?
It's about 1/4 the size of mine. But that's ok, I'm overcompensating lol
I understood the signal path up to “it starts with the guitar” then I lost it.
Hahahahahaha honestly me too
Yea, way too many interface and midi boxes for me to get lol
I thought the comment was a joke, but yep lost it 🎸⚡️😖⚡️🎛️
So. My question is what has changed since this video 🙂
I swapped the génération loss out for a MOOD, actually swapped the thermae AND merc7 out for the empress echosystem. Swapped the fuzz out for fun, of course! I might have to do another video explaining some stuff
@@joeylandrethmusic Please do !
Wanna see Dave's board too
When do pre-orders launch for Jory Lambert branded apparel? Sign me up for two t-shirts please. 🤘😂❤
This is the small board.
Man, it seems like over half your gear is routing and midi, not all of that makes sense to me.
That’s true! What part doesn’t make sense? I’d love to shed some light if I can!
@@joeylandrethmusic I appreciate it, but I don't expect you to write a book here! Lol I just got an hx stomp and I have a few midi pedals, I will just deal with things as they come up, I just see these rigs with all these extra routing and interface boxes and I have questions! Like I said, I appreciate it, but I will figure it out.
I see a Deluxe Amp head.
It’s 1965! Someone chopped the combo down. Non-reverb, and it sounds amazing!
@@joeylandrethmusic nice! I have a late 1964 Bandmaster, and I love it, but the 2x12 is a little much to haul around.
As someone who is named Colton, I don't know how to feel about that.
Apologies...
@@Thebroslandreth Nah. It's all good, man. As someone recovering from gear addiction, that board is on the mark.