Yo good looks man! I just ordered the bms inlets some blue carbonfiber kyostar filters and kyostar carbon fiber heat shields! I spent $300 total so it was cheaper than any of the similar style intake kits AND I got to pick the colors and quality of my filter 👍
@@kristohockey Amazon for filters and heat shield!! Just make sure you get 3" or , 76mm filters. The kyostar set up I did took some adjusting to get right but it fits snug!
This is the same concept I believe he uses bigger maf housing but ofcourse that comes with the price. This is a quick cheap setup that is near same! (In my opinion)
I’ve heard for non tuned it depends. People that have upgraded their turbo inlets they said it would just idle weird but drive okay (with normal driving) stepping on it would make it go sluggish.. for those who have stock inlets yes it will go into limb mode!
You can find them on eBay, aliexpress and Ofcourse Facebook marketplace! I personally got these from a friend that had a full set and just sold me the inlets!
@drivermod1 That's a deal! Facebook Marketplace and forums are attracting more and more scammers, so I have started to just pay the cost lol. I built my own intake the same way. Even used the red version of the same filters. When I saw your video, I was like, thank God I chose red and not blue. We have the same color car 🤣. You can definitely feel and hear the difference. Worth every penny.
3.7 I’d personally recommend getting the mishimoto silicones and k&n drop in filters Or On eBay getting custom maf housing and slapping the same filters on with the silicones would be great as well! Very similar to this setup just no spool noise ofcourse due to you not having turbos
@@drivermod1 the butt dyno going crazy. But in all seriousness your IATs are higher with this, the car will just pull more timing, however since it's turbo you have an intercooler so CAT temps are more important. I'd use something like tq pro to see stock temps vs "cold air". Just sharing my $0.02
@@6spddanthat’s the case at low speeds when there isn’t enough air coming in, even at low speeds look at racebox boosted 6 intakes on the dyno. Numbers can be seen even with the hot temperature.
This is NOT a NA engine. We have a heatexchanger and intercoolers. This only matters in stand still traffic. This will outperform the stock airbox in any other situation.
Ummmm...... You're now sucking in hot air from under your hood instead of cool air from outside of the car. You lost power so you can make noise. Count me unimpressed.
So.. I literally have the same setup.. but payed 350+.. YOU ARE A G!
Just got your set up and it sounds amazing
💪 glad you did enjoy them!
Are you tuned?
@@crism515 If you call a JB4 tune a "tune" then yea
🔥
W
Yessir 🫡
Yo good looks man! I just ordered the bms inlets some blue carbonfiber kyostar filters and kyostar carbon fiber heat shields! I spent $300 total so it was cheaper than any of the similar style intake kits AND I got to pick the colors and quality of my filter 👍
Yessir there is a lot of options for sure without breaking the account 😅
Where do you buy your heatshield
@@kristohockey Amazon for filters and heat shield!! Just make sure you get 3" or , 76mm filters. The kyostar set up I did took some adjusting to get right but it fits snug!
any issues with the kyostar intakes?
@@austingates1961 nah they are fine and sound great 👍
Whats the difference in performance between these nd boosted6 shorties? They do look the same
This is the same concept I believe he uses bigger maf housing but ofcourse that comes with the price. This is a quick cheap setup that is near same! (In my opinion)
B6 are 3in these are 2.5in
Tanks man for the information
Anytime! 🫡
Is it safe for the flange diameter to be 3 inches if you’re not tuned?
I believe that would cause you to go into limp mode wouldn’t it?
I’ve heard for non tuned it depends. People that have upgraded their turbo inlets they said it would just idle weird but drive okay (with normal driving) stepping on it would make it go sluggish..
for those who have stock inlets yes it will go into limb mode!
Just put k&n intake drop ins and it feels good, I’m gonna have to try this for sure, do you she’s blow off valves on? I didn’t see any
I do not have any blow off valves and yessir definitely should try it! 💪
sheeeesh
🫡yessir!
Are You Getting dyno tuned On this One?
I will be doing remote tune but I will hit the dyno to see the numbers!
What are you doing for the remote tune?
Where can i get those inlets tho!!?
You can find them on eBay, aliexpress and Ofcourse Facebook marketplace! I personally got these from a friend that had a full set and just sold me the inlets!
Will just the intakes fit the stock inlets ?
Yes they will with no problem!
@@drivermod1 so all I have to do it's just remove the intake box and I'll be good?
I just put mines on and my car cranks but not starting 😢
Did you put the maf sensors in correctly?
@@drivermod1 i did everything like u did on the video
Yooooo why these looks just like the Boosted 6 Auto ones? Except $300 cheaper lol. I wonder if it’s the same.
Well. Basically are but he provides the 3 inch maf housing but you can always get the maf housing for an extra $50 if you wanted !
@@drivermod1where would u get the housing?
Where could I find these intakes?
Check the description 💪
I need these for mine
Get them 😮💨 quick easy cheap
Those look like Z1 inlets, and will run $200 Brand new, but you can get the BMS for $100.
I got mine brand new for $80 from someone but yes agreed any turbo inlets are good for this setup!
@drivermod1 That's a deal! Facebook Marketplace and forums are attracting more and more scammers, so I have started to just pay the cost lol.
I built my own intake the same way. Even used the red version of the same filters. When I saw your video, I was like, thank God I chose red and not blue. We have the same color car 🤣.
You can definitely feel and hear the difference. Worth every penny.
Can i do this on my 3.7?
3.7 I’d personally recommend getting the mishimoto silicones and k&n drop in filters
Or
On eBay getting custom maf housing and slapping the same filters on with the silicones would be great as well! Very similar to this setup just no spool noise ofcourse due to you not having turbos
Cold air intake to hot air intake. Its for sound though. Not performance....
Performance in acceleration is better we are not sure about top end
@@drivermod1 the butt dyno going crazy. But in all seriousness your IATs are higher with this, the car will just pull more timing, however since it's turbo you have an intercooler so CAT temps are more important. I'd use something like tq pro to see stock temps vs "cold air". Just sharing my $0.02
This is similar to boosted 6 intakes and some tuners recommend them if you want to get intakes.
@@6spddanthat’s the case at low speeds when there isn’t enough air coming in, even at low speeds look at racebox boosted 6 intakes on the dyno. Numbers can be seen even with the hot temperature.
This is NOT a NA engine. We have a heatexchanger and intercoolers. This only matters in stand still traffic. This will outperform the stock airbox in any other situation.
Is this 3.7
2.0
@@drivermod1 .....3.0 :)
You feel any difference?
I definitely feel the difference in the acceleration!
🫣
Ummmm...... You're now sucking in hot air from under your hood instead of cool air from outside of the car. You lost power so you can make noise. Count me unimpressed.
Wait another 2 weeks coming out with something crazy (:
bro they make covers for them 💀
Can you please let me know how can i order it
In description my guy!
Now you lost 15hp, fully sick
You right! Ahh
😏
Lost 10hp over the sound haha
Works same way with data