How to Replace Water Pump 1994-2004 Chevy S-10

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • Buy Now!
    New Engine Water Pump from 1AAuto.com 1aau.to/ic/1AEW...
    The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind. This video shows you how to install a TRQ water pump in your 1994-2004 Chevy S-10.
    • Check here for more videos on the 1994-2004 Chevy S-10 • Chevy S-10 2nd Generat...
    This process should be similar on the following vehicles:
    1994 Chevrolet S10
    1995 Chevrolet S10
    1996 Chevrolet S10
    1997 Chevrolet S10
    1998 Chevrolet S10
    1999 Chevrolet S10
    2000 Chevrolet S10
    2001 Chevrolet S10
    2002 Chevrolet S10
    2003 Chevrolet S10
    2004 Chevrolet S10
    Tools you will need:
    • Pocket Screwdriver
    • Fan Clutch Wrench
    • Serpentine Belt Tensioner Tool 1aau.to/oa/1AXA...
    • Hose Clamp Pliers 1aau.to/oa/1AXA...
    • Needle nose pliers 1aau.to/oa/1AXA...
    • Needle nose pliers 1aau.to/oa/1AXA...
    • Pliers
    • Socket Driver
    • Torque Wrench 1aau.to/oa/1AXA...
    • Liquid Thread Locker
    • Drain Pan 1aau.to/oa/1AXA...
    • Floor Jack 1aau.to/oa/1AXA...
    • Jack Stands 1aau.to/oa/1AXA...
    • Pick 1aau.to/oa/1AXA...
    • Razor Blade / Gasket Scraper 1aau.to/oa/1AXA...
    • Rubber Mallet 1aau.to/oa/1AXA...
    • Wheel Chocks
    Subscribe: / @trq
    Check out our playlist:
    Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

ความคิดเห็น • 35

  • @TRQ
    @TRQ  3 ปีที่แล้ว +2

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
    √ *Do it Yourself*
    √ *Save Money*

    • @lanajantz2240
      @lanajantz2240 2 ปีที่แล้ว

      VIN 1GCCS19X5W8220032 MFI or SFI ?
      1998 Chevy S10
      4.3L
      V6
      LS 2 door extended cab
      How do I tell if MFI or SFI
      62 and new to repairs. Your videos are fantastic !! Wish I had all the cool tools.
      I replace the fuel pump by myself. Thank you very much for your video. Now I think it's the water pump antifreeze is draining on the ground. I've had two gentlemen look at it. For a few seconds in the rain. And that seems to be what they think it is. Next sunny day is 3 days away. I guess I'll find out then if it's the water pump

  • @tau-ceti
    @tau-ceti 2 ปีที่แล้ว +19

    I have fixed so many of my s10 issues because of your videos. Many thanks for the excellent content - so helpful.

    • @TRQ
      @TRQ  2 ปีที่แล้ว

      +Alex Milburn Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @rocketqueenone
    @rocketqueenone ปีที่แล้ว +4

    Excellent video, straight to the problem,no telling stories about your life, but you forgot to mention to re-install lower fan shroud !!!

  • @ryunbingham6962
    @ryunbingham6962 2 ปีที่แล้ว +12

    For folks needing help with fan clutch I usually take a large adjustable wrench and bonk the handle real hard with a hammer in the direction you need to go to loosen it.

  • @whiskeysudsjackwagon8510
    @whiskeysudsjackwagon8510 3 ปีที่แล้ว +41

    looks easy, until you realize you dont' have that tool right there... 1:26

  • @SpaceMan_Kam
    @SpaceMan_Kam 8 หลายเดือนก่อน

    I’ve been slowly rebuilding my s10 since I crashed it and this channel is amazing has an answer to every question ❤

  • @lanajantz2240
    @lanajantz2240 2 ปีที่แล้ว +1

    Wish I had all of these cool tools !
    They fit in there nice and easy !

  • @tyler7129.
    @tyler7129. 3 ปีที่แล้ว +2

    This video was an absolute lifesaver. Thanks!

  • @crossan008
    @crossan008 11 หลายเดือนก่อน

    I need a clear detailed video like this for brake lines on my 96 Blazer!

    • @TRQ
      @TRQ  11 หลายเดือนก่อน

      +crossan008 The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ

  • @lanajantz2240
    @lanajantz2240 2 ปีที่แล้ว

    Looking for exact part; I was asked on the internet MFI or SFI.
    NOW researching that for my truck. The more things break down the more I learn about my truck, correct!

  • @jokerrr14
    @jokerrr14 3 ปีที่แล้ว +5

    I did mine today wasn’t that bad took about an hour

  • @scottmctaggart5294
    @scottmctaggart5294 3 ปีที่แล้ว +3

    Is that just called a clutch fan tool? Did u use it with a air drill or air hammer? Thx.

  • @LoyaltyBetrayal
    @LoyaltyBetrayal 4 หลายเดือนก่อน

    I'm in the process of using your video to replace my water pump. Taking a break from trying to get the fan off. Females don't have upper body strength like men.
    So far everything is spot on. I went out of order as in got all the hoses off. While waiting for a pipe wrench to use in fan nut.
    I'll let you know when I've completed the job.

  • @lamardavis4951
    @lamardavis4951 7 หลายเดือนก่อน

    Thanks this a great video guide, pretty simple. 😊

  • @eriic562
    @eriic562 3 ปีที่แล้ว +3

    Hello question silicone isn't needed for the water pump gaskets?

  • @christurnbull2481
    @christurnbull2481 2 ปีที่แล้ว

    I really enjoy seeing someone actually use power tools..too many long videos with folks using hand tools..
    Is that an air hammer you used to remove the fan with?

  • @ericshockley1351
    @ericshockley1351 ปีที่แล้ว +1

    How about the lower fan shroud or did I miss you putting it back on ? Either way. Good info for those wondering how to install one. If I remember the last time I changed one that fan nut is easier with a wrench holding a bolt head on the pully while pushing opposite direction with large nut

  • @lanajantz2240
    @lanajantz2240 2 ปีที่แล้ว

    Awesome video, as usual

  • @daveprostine1055
    @daveprostine1055 8 หลายเดือนก่อน

    very helpful video but around 3:20 ish the lower shroud is removed. our lower radiator hose is in great shape (I think someone replaced it perhaps?). hose is not brittle so thinking skip removing it from the radiator. comments/suggestions/advice welcome as we are not sure the lower shroud even needs to be removed as it flexes out of the way.

  • @brycebradford7515
    @brycebradford7515 7 หลายเดือนก่อน

    What do you do with the studs from the old pump if the new one doesnt have them?

  • @xporthazymage6423
    @xporthazymage6423 3 ปีที่แล้ว +1

    What type of v6 is the engine? Vin z or vin w

  • @Orange-Jumpsuit-Time
    @Orange-Jumpsuit-Time 2 ปีที่แล้ว +9

    This guy isn't very responsive to answering questions, is he? Maybe he's dead?

  • @josephpeterson9352
    @josephpeterson9352 3 ปีที่แล้ว +2

    What is the tool on the drill

  • @drxfluffy
    @drxfluffy 29 วันที่ผ่านมา

    This the v6 engine ?

  • @jamesrobert782
    @jamesrobert782 ปีที่แล้ว

    The vortec is probably the easiest water pump to replace.

  • @episdosas9949
    @episdosas9949 ปีที่แล้ว

    gracias. i did it

  • @ConfedVet
    @ConfedVet 2 ปีที่แล้ว

    My water pump came with metal gaskets, do I need sealer?

  • @lanajantz2240
    @lanajantz2240 2 ปีที่แล้ว +1

    I pray Lord let me be able to do I this

  • @Mike-mq7eu
    @Mike-mq7eu ปีที่แล้ว

    Iam Shure we all have your 300$ fan clutch tool not
    FAN CLUTCH REMOVAL WAS INLY REASON I WATCHED. U SKIPPED THE COMMON FOLK WAY. IF YOUR BROWSERS WERE PROS WE Wouldn't NEED VIDS

  • @shineramsey7650
    @shineramsey7650 2 ปีที่แล้ว

    Loo

  • @Raccoonfarts800
    @Raccoonfarts800 ปีที่แล้ว

    What size is that for the fan clutch