Custom Tamiya Globe Liner 6x6 Semi-Truck and Flatbed Trailer - Rough Dirt Roads
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2018
- The Tamiya Globe Liner 6x6 and flatbed trailer come out onto the dirt roads for a change today. While building my off-road course, I've kept a small road around the perimeter for semi-trucks. I have had this tractor for years and have been meaning to make this video for a while. It"s so satisfying watching these trucks get put to work, I have about 10lbs of steel weights in the wooden boxes over the drive axles.
This Truck was turned into a 6x6 with a transmission swap, the Rc4wd R2 tranny was custom mounted into the frame. The cab had to be raised a bit and a Tamiya High-lift axle was used on the front, also all differentials have been locked.
Produced by AsT - บันเทิง
You should do a video just showing this trucks drivetrain....whoever built it nailed it.
Awesome very great Video enjoyed..
Shoutout from TAT Express out of Hutchins, TX
Awesome! Thanks for watching TAT Express!
Love the freight inventory
🎶🎵Tinted windows fully modified probably a dope dealer inside.🎵🎶
Great video like the color of the cab cool trailer
Thank you acmeradioinc!
That bridge is a great idea!! Awesome video with that beautiful globe liner
Great truck good driving
Looks awesome
Awesome video! Awesome build!
😍👍beautiful truck
Thanks 👍
Great looking Globe Liner bro. That’ll be my next build after the King Hauler 👍🏼
Good choice! Thanks for watching Voodoo Trucking!
🚛👍 International 9670. I hardly ever see any of the real cabover semi trucks out on the roads nowadays.
Nice set up man. I like the C.O.E.'s .
Hope to buy one this summer. Nice flatbed too.
You've got mad driving skills.👍
Definitely an awesome truck to drive, lots of fun with a loaded trailer.
Thank you Richard!
some risky manuvers lol. Great driving, beautiful truck
Thanks for watching!
Great video! And great looking truck,the home course is awesome too!👍👍👍👍
Great video. Bro. You need a bulldozer to smooth out your roads lol. Good thing you got awesome 6x6 globeliner. Sweet color too
Dozer would be awesome! Thanks for watching Micheal
👍👍👍🤗😍💪
Love your videos and your builds. Is that yellow hockey skate laces turned into tie downs straps? If so, brilliant!!!
Yes that's exactly what they are haha. Thanks for watching Shotgun RC!
Wow great looking rig man. Very nice 👌🏻👊🏻
👌👌👌👌👌👌👌👍👍👍👍👍
Wow
I Want one this Rc truck
Hi! Great video! How did you make the transformation into 6x6?
Beautiful truck! What transmission are you using??
Lol what is that, a 55t motor, sounds torquey.
This is running a Factory Mabuchi silver can motor that came in the kit, coupled to an old school Rc4wd R2 transmission. Thanks for watching Ben
Great track.. very ingenious. Just finishing my globeliner. How did you place /secure the MFU into the cabin? The instruction manual says stick with shock absorber tape to the roof but all the videos I have watched have nothing on the cabin ceiing. Pls advice.
If this isn't too late...
I'm going to start my Globe Liner soon, and like my Grand Hauler, I'm making a wall out of .060" Styrene. Ill be putting it behind the seats and mounting all electronics behind it. That way I can have a full, detailed Interior!
That was amazing!! I'm about to build my first...
You've obviously locked the rear Axles, because I saw Air under the Tires, and no crazy spinning.
What I NEED to know is, HOW did you get so much Suspension in the Front Axle?? EVERY Video I've seen so far shows only about 1/8" to 3/16" of Leaf Spring deflection. 😲
Even the Rears seemed more articulated.
Is there any build Videos on this Rig?
No build video unfortunately, Rc4wd Z-boxes and Shooter shackles were used to mount the front Tamiya Tundra leaf springs, and yep all the diffs are locked too. Thanks for watching PoorManRC
Thanks, I'll have to try that!
Love this video. Great work. I'm building my trailer now and want to make the same mod. What did you use for spacers for the tie down bar? Also did you make the wooden crates?
At the time I used 2,(3mm) nuts to make the spacers. Recently I picked up some 3mm x 4mm spacers from KNK hardware to replace the nuts. Yes sir all the wood crates were hand built. Thanks for watching Brian Mason!
1/18 International 9600
Is this running the stock 540 motor from the kit? It acts like a crawler type setup.
It is a 540 motor with a rc4wd crawler transmission, 6 wheel drive and locked diffs
where did you get the freight for flatbed.i want to buy cant find online.nice rig
Most of them are homemade with popsicle sticks, sometimes the dollar store will have small wood box's that look the part. Thanks for watching bigjoeyb66 cool dude
Hai friend
Hello RC Kid's, thanks for checking out the channel!
@@albertascaletruck6802 if you can watch my videos help me too dude
Nice set up
what brand trailer is that
Thanks Socal Sean, this is a standard Tamiya flatdeck slightly modded to have rails on the side of the trailer to tie down loads.
Hi I want to convert my Knight Hauler to 6x6 do you know where I can buy the parts?
Hey T Bro I used the Rc4wd R2 transmission mounted between the frame rails and a Tamiya high-lift front axle. Also the front leaf spring is from the Tamiya high-lift Tundra kit, they are a little shorter than the Ford and Hilux leafs. i ordered all these parts from Ebay
Thanks a lot for the info! I’m also about to add real exhaust pipes and smoke to my rig. You should too man! I can’t find that front differential for sale anywhere so I bought a different one that I heard will work. I thought about just buying one of those trucks just for parts. Did you have to drill your own holes to mount it, and what gear did you use on the output shaft of the original transmission to turn the additional tranny?
Sukhpreet Rajian
Sukhpreet rajian