Excellent video, and my lock is mounted Rock Solid! I'm not sure about others or maybe an older design bracket but absolutely no metal is touching my frame because the base rests on the straps. Wonderful, well thought out design. And too easy to mount thank's to this video. I ran the excess rubber strap underneath the metal base along with the nylon strap through the loop, pulled it snug and attached the mount. I then used a square of Scotch 3M Double sided foam mounting tape underneath the end of the excess nylon strap to secure it to the nylon surounding the down tube where i mounted it. Never trimmed either strap which is a good thing in case i want to mount it on a different bike with a bigger tube or whatever. Solid!! and look's neat too. Thank you for posting this video!
Very good tutorial for installing the Kryptonite U-Bracket. Very clearly explained and shown and made it very easy for me to this on my own bike afterwards. I recommend this video rather than using the instructions that were provided. This was much clearer and easier to follow and understand. Thanks Kryptonite Locks.
Thank you so much! The instructions were impossible to read, and you made it so simple! Saved me so much time and frustration! Much appreciated! And I mean it!
Many thanks for this. I have an old English ladies bike and could not work out where to fit the series 2 lock and was also wary of making a mistake fitting the bracket. Your video was very clear and solved all my problems and I now have a successful installation.
yeah i love the pauses - hilarious! i just received my u lock replacement in mail today. they more than honored their guarantee w/o question. awesome company! i’m a kryptonite fan for life.
Super helpful, except if there's a way to f*** it up, I'll find it. Next video, would be great for people like me to remind us at 2:39 to make sure the body bracket is UPRIGHT first before attaching to tug block. I did finally figure out that loosening it with the hex wrench could loosen it enough to flip it. Thought the hex wrench in the kit didn't work. Had to use my own tool to make it work.
Excellent video. I was initially worried about the metal tugblock scraping my frame but of course when you tighten the allen key it pulls it away from the frame. My tip is not to "try" the lock in the bracket until it's either i) fitted to the bike or ii) the allen key is tightened into the metal tugblock while off the bike. If you clip the lock into the bracket off the bike and things are a bit loose, you will not be able to get the lock out of the bracket (possibly what happened to Raulito Mares below). In this case you will need to disassemble the bracket to remove the lock. You will see that the lock/release mechanism is just a single piece of bendy plastic which also serves as the release button. Bit disappointing given the quality of the lock and the thought that has obviously gone into designing the bracket.
Thank you for your feedback, we appreciate both the positive and the "less than positive". Your comments help us to improve our products! We will share with Product Team and Engineering.
Why doesn't the rubber go under the metal bracket and if, not what's the purpose of it - I don't see how the nylon strap will do any damage to the frame.
Is it mounted on your bike? The leverage provided by mounting it should help. If it is mounted, please try a wax-based lube with Teflon or see if a local bike shop can help. If it does break, submit a Request and we will assist you: kryptonite.zendesk.com/hc/en-us/requests/new
I put the rubber under the metal clamp. It works but looks like i did it wrong. Also, does the hex bolt go into the frame? Will this damage the frame with dents when you tighten? Not worried about the paint more than structural damage.
If you're paying for kryptonite why isn't the holder made out of metal it just seems to be a bit weird that one bits plastic and the lock bits metal I mean come on 2017 if it's made out of aluminium worth it was made out of Steel I mean it'll be a little bit more heavier but it be more reinforced for the lock
So does it come with a spline lug? I can't see it listed in the 'package contents' you describe. Yet it is pictured (in most cases 2 are pictured) in other product descriptions online. If it does come with the spline lug(s) what are the diameter measurements?
Hi, I was trying to mount the holder on my bike and managed to drop the bolt down a drain, I was wondering if you knew the dimensions of the bolt so I could get a replacement from the hardware store ? thanks couldn't find them on your website
It doesn't fit well on the seat tube on my bike, but I'm not sure how to put it on the top tube with the brake cable there. The cable on my road bike is not in a sleeve like the one on the bike shown in this video. Suggestions?
+Austin Smith got more info for you...strap might be able to fit underneath cables in some locations on the down or top tube.. if seat tube is a no go did you try the seatpost area just above the collar? If none of these options work you may have to forgo using the bracket.
Is the bracket mounted on your bike? It is easier to remove if you have that added leverage. If it is installed on your bike, you can try a little lube. If neither of those options help, you might bring it to your local dealer to see if they can give you some "hands on" help. Thank you for your patience.
+David Braithwaite Please submit a Request ticket at the link, with your details and photo of the lock: kryptonite.zendesk.com/anonymous_requests/new Thank you for your patience.
So when will Kryptonite Locks going to make a frame mount for the Kryptonite New York Fahgettaboubit lock?? Not everyone wants to mount it to there handle bars. It's just in the way there. Come you could a lot of these frames mount for the Fahgettaboubit locks!
The Flex Frame bracket is included with many of our U-Locks in the KryptoLok and Evolution families. It is sold separately with 2 different sized splines. The MSRP is approximately $15.95 USD. Check with your local bike shop.
+Magdalena Trusiak Comes with 13mm and 16mm splines (piece that goes on your lock). Can you contact us and let us know what lock you have: kryptonite.zendesk.com/anonymous_requests/new
Is the bracket mounted on your bike? The leverage provided by mounting should help you to remove it. You can also try a wax-based lube with Teflon, like Finish Line. Are you able to bring the lock to a local bike shop? If not, and if lubricating also won't help, please submit a Request Ticket and we will assist you. kryptonite.zendesk.com/hc/en-us/requests/new We appreciate your patience.
We don't include this bracket with our heavier U-Locks, like the New York LS or New York Fahgettaboudit Mini U-Lock. We recommend our H-Bar Handlebar Carrier for the heavier locks.
+Dustin Beyette (The Person) Hmm ok...vinyl shouldn't impact the flex-frame as the spline allows for separation... can you send us a pic and we can check it our for you and assist kryptonite.zendesk.com/anonymous_requests/new
+KryptoniteLocks alright I will, yeah I've been using it for about a week, not sure if it'll "break itself in" but when I press the gray button i basically have to use two hands every time and hold my bike. I will click that link when I get home from work. thank you very much for reaching out.
+Dustin Beyette (The Person) no problem - removing the u-lock from the bracket is easier with the bracket on the bike...if it is and you are still having to pull that hard submit your info and we can send you a new bracket.
Yes. Apologies. My one is Kryptonite New York. With the help of this brilliant video I could put the bracket on and then change the angle slightly so the lock fitted in the holder exactly where I wanted it.
also i love the pause screenshots
Unbelievable how easy this really is. You wouldn't know it by looking at the paper instructions. Thank you for a very clear instruction video!
Thanks for the feedback. We're glad that the video was helpful!
Great video, a million times clearer than the written instruction leaflet, Thank you for saving me a lot of frustration and fuss.
+chris john
We're happy to hear that the video was helpful! Thanks for sharing your feedback.
Those pause screens are an incredible touch. Nice.
Excellent video, and my lock is mounted Rock Solid! I'm not sure about others or maybe an older design bracket but absolutely no metal is touching my frame because the base rests on the straps. Wonderful, well thought out design. And too easy to mount thank's to this video. I ran the excess rubber strap underneath the metal base along with the nylon strap through the loop, pulled it snug and attached the mount. I then used a square of Scotch 3M Double sided foam mounting tape underneath the end of the excess nylon strap to secure it to the nylon surounding the down tube where i mounted it. Never trimmed either strap which is a good thing in case i want to mount it on a different bike with a bigger tube or whatever. Solid!! and look's neat too. Thank you for posting this video!
Instructions unclear, accidentally locked Krazy-8 to a pipe in my basement.
Thank you. Respectfully, this is so much easier than the paper instructions.
This was extremely helpful! Thanks very much. Also, the 2nd pause screen is HILARIOUS.
Cheers mate this is a great video and nice walkthrough (much better than the instructions in the manual!). Those pause screenshots tho👌
Very good tutorial for installing the Kryptonite U-Bracket. Very clearly explained and shown and made it very easy for me to this on my own bike afterwards. I recommend this video rather than using the instructions that were provided. This was much clearer and easier to follow and understand. Thanks Kryptonite Locks.
Looked at the instructions and thought "NOPE! I bet someone shows this on TH-cam in 2 minutes or less" And here I am, so easy!
Thank you so much! The instructions were impossible to read, and you made it so simple! Saved me so much time and frustration! Much appreciated! And I mean it!
Many thanks for this. I have an old English ladies bike and could not work out where to fit the series 2 lock and was also wary of making a mistake fitting the bracket. Your video was very clear and solved all my problems and I now have a successful installation.
Thank you for sharing, we're glad that the video helped you!
Great quality, great video, great pauses and fo course great locks - guys you are the best!
yeah i love the pauses - hilarious! i just received my u lock replacement in mail today. they more than honored their guarantee w/o question. awesome company! i’m a kryptonite fan for life.
Thanks for this video, much easier for me to install the bracket on my new bike than reading the manual! 👌🏽😊🚴🏼♀️
Thank you. Really clear helpful instructions. I'm completely cack-handed but I did this without a hitch.
Foolproof explanation. Thanks!
Thank you very much! I lost my paper instructions so this was extremely useful.
Thank you!
Getting my lock tomorrow can't wait to test it out if there as good as people say will be getting more.
Thank you! Great video...you explained how to install the U lock perfectly.
Thank you, just bought one today, instructions very clear
Great, instructive video, great pause screenshots! Well done sir.
For the next kryptonite generation add a CD with this dude and instructions👍
Excellent video! Made fitting my bracket a cinch! Thank you!
Damn I'm having hard time getting the screw in place. Thanks for the vid!
Super helpful, except if there's a way to f*** it up, I'll find it. Next video, would be great for people like me to remind us at 2:39 to make sure the body bracket is UPRIGHT first before attaching to tug block. I did finally figure out that loosening it with the hex wrench could loosen it enough to flip it. Thought the hex wrench in the kit didn't work. Had to use my own tool to make it work.
Thanks for this post. I finally got it right this time...
Excellent video. I was initially worried about the metal tugblock scraping my frame but of course when you tighten the allen key it pulls it away from the frame.
My tip is not to "try" the lock in the bracket until it's either i)
fitted to the bike or ii) the allen key is tightened into the metal
tugblock while off the bike. If you clip the lock into the bracket off
the bike and things are a bit loose, you will not be able to get the
lock out of the bracket (possibly what happened to Raulito Mares below). In this case you will need to disassemble the
bracket to remove the lock. You will see that the lock/release mechanism
is just a single piece of bendy plastic which also serves as the
release button. Bit disappointing given the quality of the lock and the
thought that has obviously gone into designing the bracket.
Thank you for your feedback, we appreciate both the positive and the "less than positive". Your comments help us to improve our products! We will share with Product Team and Engineering.
metal with painted metal is no a good idea, i recomend put a little piece of innertube rubber in the metal piece to prevent scratches!!
Great video and presentation, many thanks!
Offset installation😉👍🏾👍🏾
Why doesn't the rubber go under the metal bracket and if, not what's the purpose of it - I don't see how the nylon strap will do any damage to the frame.
The rubber acts as a shim, to help keep the nylon strap from slipping.
Would you mind popping 'round to my house and pausing occasionally? Very helpful vid, thanks.
The bracket seems like an improvement over the previous version but your locks still rattle while riding. The rubber rings are too narrow!
Really helpful! But i wouldn't say the same thing about the instruction leaflet
how do you remove the lock from it? mines won't budge. I don't want to break the grey trigger or whatever
Is it mounted on your bike? The leverage provided by mounting it should help. If it is mounted, please try a wax-based lube with Teflon or see if a local bike shop can help. If it does break, submit a Request and we will assist you: kryptonite.zendesk.com/hc/en-us/requests/new
How do you guys store the cable lock when you're not using it? Attach it to the bike or around the lock, or just in a backpack?
Fantastic video, thank you!!
Thank you very much for this video! Dan, especially thanks.
I put the rubber under the metal clamp. It works but looks like i did it wrong. Also, does the hex bolt go into the frame? Will this damage the frame with dents when you tighten? Not worried about the paint more than structural damage.
this is good content
Thanks you for the video🙃
The pause thing got me
Thanks you very much sir
The paper instructions got me confused. Now I understand.
great video! great guy!
Trimming it! ah that's where we god stuck, the screw wouldn't reach the hole and we couldnt figure out why . Thanks!
Great video but I have a problem. When I place the lock it is so tight that it is nearly impossible to take it of again. Any ideas?
Please send us a photo of your lock and bracket, and we will replace the bracket for you.
kryptonite.zendesk.com/hc/en-us/requests/new.
Thank you.
The paused screen shots gave me an unexpected LOL
nice vid thanks,
Rubber shim protecting your frame from everything except the big piece of metal strapped to your frame. Stupid design choices.
Thank you for taking the time to post your feedback. We appreciate all comments. And we will share your thoughts with our Product Team.
thank you
merci sir demonstration
thanks
If you're paying for kryptonite why isn't the holder made out of metal it just seems to be a bit weird that one bits plastic and the lock bits metal I mean come on 2017 if it's made out of aluminium worth it was made out of Steel I mean it'll be a little bit more heavier but it be more reinforced for the lock
Hi, Is this product compatible with Meesenger Mini+?
Unfortunately, the Flex Frame Bracket is not compatible with the Messenger Mini or Mini+.
Hi, this product is compatible with u lock messenger mini + ?
i just see the previous answer, thanks
Thank you! 😀 🚵
So does it come with a spline lug? I can't see it listed in the 'package contents' you describe. Yet it is pictured (in most cases 2 are pictured) in other product descriptions online. If it does come with the spline lug(s) what are the diameter measurements?
The correct spline is already installed on the lock. If you purchase the Flex Frame Bracket separately, it comes with a 13mm and a 16mm spline.
Wow, that was quick Thanks!
Hi, I was trying to mount the holder on my bike and managed to drop the bolt down a drain, I was wondering if you knew the dimensions of the bolt so I could get a replacement from the hardware store ? thanks couldn't find them on your website
Hi Henri, Please submit a request here with a photo of your bracket. We can send you a new bolt.
kryptonite.zendesk.com/anonymous_requests/new
He looks like Thanos in the thumbnail.
It doesn't fit well on the seat tube on my bike, but I'm not sure how to put it on the top tube with the brake cable there. The cable on my road bike is not in a sleeve like the one on the bike shown in this video. Suggestions?
+Austin Smith is the down tube an option for mounting the bracket?
+KryptoniteLocks There are two shifting cables that run along the down tube. Same problem.
+Austin Smith got more info for you...strap might be able to fit underneath cables in some locations on the down or top tube.. if seat tube is a no go did you try the seatpost area just above the collar? If none of these options work you may have to forgo using the bracket.
Did they use an engineer for the presentation.
Do you have online ordering options? Specifically to an FPO/AE Address?
Gino, Thank you for your interest. We don't sell direct. Our products are sold globally, is there a local bike shop in your area?
My lock is stuck in the bracket, pushing the grey release butting does absolutely nothing! How am I supposed to get it out?!
Is the bracket mounted on your bike? It is easier to remove if you have that added leverage. If it is installed on your bike, you can try a little lube. If neither of those options help, you might bring it to your local dealer to see if they can give you some "hands on" help. Thank you for your patience.
If you still have a problem, please submit a Request Ticket: kryptonite.zendesk.com/anonymous_requests/new
lock stopped working, won't open with combination any more. WHY?
+David Braithwaite
Please submit a Request ticket at the link, with your details and photo of the lock:
kryptonite.zendesk.com/anonymous_requests/new
Thank you for your patience.
So when will Kryptonite Locks going to make a frame mount for the Kryptonite New York Fahgettaboubit lock?? Not everyone wants to mount it to there handle bars. It's just in the way there. Come you could a lot of these frames mount for the Fahgettaboubit locks!
Thanks for your feedback. We have no immediate plans for a frame mount for the heavier locks. I will pass your comment along to our Product Team.
I've heard mixed reviews about this bracket, what are peoples general verdict of this?
how much is it?
The Flex Frame bracket is included with many of our U-Locks in the KryptoLok and Evolution families.
It is sold separately with 2 different sized splines. The MSRP is approximately $15.95 USD. Check with your local bike shop.
WIll ot fit with 14mm ulock ?
+Magdalena Trusiak Comes with 13mm and 16mm splines (piece that goes on your lock). Can you contact us and let us know what lock you have:
kryptonite.zendesk.com/anonymous_requests/new
I have other company lock with 14 mm
+Magdalena Trusiak
The Flex Frame bracket doesn't come with a 14mm spline, so it would not work with your lock.
How can you remove it
+Nestor Gonzalez
Loosen the hex nut in the spline and you should be able to slide it off the lock.
my gray button on the bracket is a dud
now my lock is stuck
Is the bracket mounted on your bike? The leverage provided by mounting should help you to remove it. You can also try a wax-based lube with Teflon, like Finish Line. Are you able to bring the lock to a local bike shop? If not, and if lubricating also won't help, please submit a Request Ticket and we will assist you. kryptonite.zendesk.com/hc/en-us/requests/new
We appreciate your patience.
It doesn't seem to be secureu to mount such a heavy lock by one tiny bolt and only 2mm screw thread.
We don't include this bracket with our heavier U-Locks, like the New York LS or New York Fahgettaboudit Mini U-Lock. We recommend our H-Bar Handlebar Carrier for the heavier locks.
Yes you do :) I've just received my 1.7 kg full-sized Evolution 4 STD with this att. system.
Also the New York Lock Standard comes with the Flex Frame Carrier.
anyone else have trouble with the rubber outside of the ulock itself keep catching on the bracket?
+Dustin Beyette (The Person) are you still having trouble? are you referring to the vinyl on the outside of the shackle?
Yeah
+Dustin Beyette (The Person) Hmm ok...vinyl shouldn't impact the flex-frame as the spline allows for separation... can you send us a pic and we can check it our for you and assist kryptonite.zendesk.com/anonymous_requests/new
+KryptoniteLocks alright I will, yeah I've been using it for about a week, not sure if it'll "break itself in" but when I press the gray button i basically have to use two hands every time and hold my bike. I will click that link when I get home from work. thank you very much for reaching out.
+Dustin Beyette (The Person) no problem - removing the u-lock from the bracket is easier with the bracket on the bike...if it is and you are still having to pull that hard submit your info and we can send you a new bracket.
hi my bracket body came apart today as I was trying to put it on and I can't fit it back together. help pls asap.
Please submit a request and include your information and photo. We will replace the bracket for you.
kryptonite.zendesk.com/anonymous_requests/new
Brilliant. This lock is MASSIVE though - take a look at it before you buy it.
The lock in the video is an Evolution Mini, one of our smaller U-Locks.
Yes. Apologies. My one is Kryptonite New York. With the help of this brilliant video I could put the bracket on and then change the angle slightly so the lock fitted in the holder exactly where I wanted it.
Great instructional video but I had nightmares after watching this. :(
wattle bottle
The instructions included are laughable
Bracket with ridiculous 360 rotation option, just make a solid block.
We appreciate all feedback and will forward your comments to our Product Team.