so what was the purpose of removing the 2 bolts from the window? once the window is taped up, do you lower the track all the way down? I dont remember you mentioning that.
dumbfounded if I remember right I had to take the window off the regulator then move the window regulator down off the window so I can remove the whole metal plate that on the door
I can hear my locks when I push the button on the interior driver side , but the passenger side and both rear do not respond...so this is the solution? Or would it be a fuze somewhere?
VareaIII what do you mean yours won't lock from outside? Is it when you put your key in the lock cylinder it won't lock sounds like a rod that goes to lock cylinder to the latch is not connected
Worked well on my Fusion. Thanks
good video straight up how to fix the problem with out the usual 15 minutes of totally unrelated monologue....thanks
Is the process any different if the front door was being worked on?
Valent I don't think so
so what was the purpose of removing the 2 bolts from the window? once the window is taped up, do you lower the track all the way down? I dont remember you mentioning that.
dumbfounded if I remember right I had to take the window off the regulator then move the window regulator down off the window so I can remove the whole metal plate that on the door
Nick the car guy thanks
I can hear my locks when I push the button on the interior driver side , but the passenger side and both rear do not respond...so this is the solution? Or would it be a fuze somewhere?
Seem like a wiring problem
What is the part number?
Which one do you need
The actuator controls the door latch? Mine won't lock the outsite driver door
VareaIII what do you mean yours won't lock from outside? Is it when you put your key in the lock cylinder it won't lock sounds like a rod that goes to lock cylinder to the latch is not connected
I can replace the latch without removing the inner panel and handle.
show le
me
How???
Useless info. How do you remove the panel - step by step